The Ender-3 V4 is Creality's next Ender: an open-frame bedslinger with a 220 x 220 x 235 mm volume, Creality OS based on Klipper, speeds up to 500 mm/s and CFS support for up to 16 colours. It is for hobbyists who want a quiet, easy printer they can also tinker with, and the Combo adds the CFS.
Creality OS (Klipper) with Fluidd UI supported and root access, per Creality's page, so Moonraker is there. Creality doesn't say whether Fluidd needs root first.
来源
Choose the Ender-3 V4 for a modern Ender that you can open up: Creality's page says Creality OS supports root access, an expert mode and Fluidd. It is new and we found no independent review. It is open and tops out at 300 degrees C, so it suits PLA, PETG and TPU best; for a closed chamber and engineering filaments choose an enclosed printer such as the Creality K2 or Bambu Lab P2S. For a cheaper start, the Ender-3 V3 Neo has the same plate size.
优点
Creality OS with Klipper roots, root access, an expert mode and Fluidd support (Creality).
Quiet at about 47 dB in Quiet Mode, with linear rails and a sound-absorbing chassis (Creality).
Full-auto calibration with auto Z-offset, auto levelling and input shaping, and a magnetic quick-swap nozzle cover (Creality).
Up to 500 mm/s and 12,000 mm/s2, with up to 300 degrees C and a 100 degrees C bed (Creality).
Connects to up to four CFS units for 16 colours, with auto filament relay and tangle detection (Creality, CFS sold separately).
Works with SimplyPrint through Klipper, compatible.
缺点
Open frame with no enclosure: Creality lists ABS, ASA and nylon-CF, but without a chamber they are hard to print well.
A small 220 x 220 x 235 mm volume.
The CFS is sold separately unless you buy the Combo (Creality).
New and without an independent review, so the speed claims are Creality's own.
适合谁
学校可用
Quiet, easy to set up and compatible with SimplyPrint, so student prints can be queued for approval, but the frame is open.
业余爱好者非常适合
Quiet, modern, hackable and expandable to many colours at a modest price.
企业可用
Fine for PLA and PETG prototypes with a Klipper route, but small, open and unproven.
打印农场可用
Klipper gives remote control, but the plate is small, there is no enclosure and no plate-clearing kit in our sources.
Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026.
成立:
2014 ·
总部:
Shenzhen, China ·
所有权:
Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive ·
网站:www.creality.com
Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions.
固件和自定义固件 ●●●●●
Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access.
[1][2][3][4][5]
本地控制与集成 ●●●●●
Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app.
[6][20][7][21][4][8][22]
第三方耗材、切片软件和零件 ●●●●●
Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs.
[10][11][12]
维修和备件 ●●●●●
Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends).
[12][13][14]
数据与隐私 ●●●●●
Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored.
[15][6]
社区和文档 ●●●●●
One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum.
[16][10][6]
优点
Klipper-based models can be run entirely on the local network through Fluidd, without an account.
Firmware for most current models and the Creality Print slicer are published as source on GitHub.
Wide range, from budget Ender printers to multi-colour K2 machines.
Spare-part kits and model-specific replacement guides are easy to find.
Very large user base, so community help is easy to find.
缺点
Firmware source has usually appeared months after a model ships.
Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max.
The privacy policy says little about printer and cloud data.
The SPARKX line is built around the Creality Cloud app and an account.
实绩
五月 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024.
[16][5]
十一月 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide.
[4][17][3]
九月 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0.
[2][18]
八月 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions.
[1][3][5]
中国
Klipper（Moonraker） 
SimplyPrint客户端 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
Cura
Kiri:Moto
