The Ender-3 V3 Mega is Creality's large open-frame bedslinger: a 420 x 420 x 420 mm volume, a Sprite 2 extruder for TPU down to 85A and a metal frame. It is for hobbyists and small studios that want big parts or large batches, and the Combo adds the CFS nano for four-colour printing.
Creality's own slicer profile for the Mega uses Klipper G-code, so it runs Klipper (Creality OS) like the V3 Plus. Creality doesn't say whether Fluidd/Moonraker or root are available.
来源
注意：其他切片软件，例如Simplify3D、ideaMaker、SuperSlicer和KISSlicer，不在我们的云端，因此我们不会跟踪其配置文件。它们仍可能与您的Creality Ender-3 V3 Mega Combo良好配合：请查看切片软件自身的文档或论坛以获取配置文件。您也可以向我们的GitHub开源切片软件配置文件数据库贡献配置文件。
适用于Creality Ender-3 V3 Mega Combo的应用
SimplyPrint可作为Creality Ender-3 V3 Mega Combo的应用：可在您的手机和任何浏览器中使用，并提供云端切片软件。
Choose the Mega when plate size and flexible filament are the point: Creality lists TPU from 85A to 95A and a 420 mm plate that fits 36 multi-colour models in one run, against four runs on a 250 mm plate. It is new and we found no independent review. It is open, so ABS and ASA need care; for those, or for a closed classroom machine, an enclosed printer such as the Creality K2 or Bambu Lab P2S is the better pick. If you do not need the size, the Ender-3 V3 Neo costs less.
优点
A 420 x 420 x 420 mm volume, about 96 percent more plate area than the Ender-3 V3 Plus (Creality).
A Sprite 2 extruder built for flexible filament, with TPU from 85A to 95A (Creality).
The Combo adds the CFS nano for automatic four-colour printing; the standalone printer has a built-in Y-flow relay that switches to a backup spool (Creality).
Filament level monitoring with low-filament alerts, a 3.2-inch touchscreen and Wi-Fi (Creality).
Runs Klipper according to our facts, and is expected to work with SimplyPrint through Klipper or the SimplyPrint Client.
缺点
Open frame with no chamber, so ABS and ASA are difficult at this size.
A typical speed of 300 mm/s on stepper motors, not the fastest in Creality's range (Creality).
No built-in camera in our facts, and Wi-Fi is 2.4 GHz only (Creality).
Multi-colour printing on the standalone printer needs the optional CFS nano (Creality).
New and without an independent review; the Klipper and Client routes are expected, not verified.
适合谁
学校不太适合
A large open bedslinger with a moving bed is not classroom-friendly, even though SimplyPrint can queue prints for approval.
业余爱好者适合
Big plate, soft TPU and an optional four-colour Combo at a modest price.
企业可用
Good for large PLA, PETG and TPU parts, but open and lightly tested.
打印农场可用
Creality names print farms as a use and Klipper helps remote control, but there is no camera or enclosure in our facts.
谁制造了Creality Ender-3 V3 Mega Combo，以及Creality的开放程度：其打印机能否在不使用其云服务的情况下运行，是否支持任意耗材和切片软件，以及能否维修。各项均根据公开来源评分。
开放性：大多开放（5分制3.6分）
大多开放
封闭生态系统打开
Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026.
成立:
2014 ·
总部:
Shenzhen, China ·
所有权:
Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive ·
网站:www.creality.com
Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions.
固件和自定义固件 ●●●●●
Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access.
[1][2][3][4][5]
本地控制与集成 ●●●●●
Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app.
[6][20][7][21][4][8][22]
第三方耗材、切片软件和零件 ●●●●●
Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs.
[10][11][12]
维修和备件 ●●●●●
Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends).
[12][13][14]
数据与隐私 ●●●●●
Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored.
[15][6]
社区和文档 ●●●●●
One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum.
[16][10][6]
优点
Klipper-based models can be run entirely on the local network through Fluidd, without an account.
Firmware for most current models and the Creality Print slicer are published as source on GitHub.
Wide range, from budget Ender printers to multi-colour K2 machines.
Spare-part kits and model-specific replacement guides are easy to find.
Very large user base, so community help is easy to find.
缺点
Firmware source has usually appeared months after a model ships.
Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max.
The privacy policy says little about printer and cloud data.
The SPARKX line is built around the Creality Cloud app and an account.
实绩
五月 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024.
[16][5]
十一月 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide.
[4][17][3]
九月 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0.
[2][18]
八月 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions.
[1][3][5]
中国
SimplyPrint客户端 
Klipper（Moonraker） 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
Cura
Kiri:Moto
