The VEHO 1000A is the fully enclosed version of Tronxy's one-metre-cube Klipper printer: 1000 x 1000 x 1000 mm with a 320 °C hotend and 500 mm/s speed. It is for workshops that want to print very large parts, including ABS and ASA, in a closed chamber.
Ships Klipper with Moonraker: KlipperScreen on the touchscreen, Mainsail in the browser at the printer's IP (manual, resonance-compensation section).
来源
Choose the VEHO 1000A when you want a one-metre build volume with an enclosure so ABS, ASA and nylon behave better; the open VEHO 1000 PRO has the same size without the enclosure and offers an optional two-colour extruder. It is a very large machine with no independent review, so treat it as a project. For smaller parts, the VEHO 4A or a Bambu Lab printer is far easier to live with.
优点
Fully enclosed with a front door, on a 1000 x 1000 x 1000 mm build volume (Tronxy).
Klipper firmware at up to 500 mm/s, so it works with SimplyPrint through Klipper.
Four independent Z motors, 36-point auto-levelling with single-point independent control, and linear guide rails (Tronxy).
Ceramic-core heating to 320 °C, dual-drive extruder and power-off resume (Tronxy).
Wired or wireless connection, with a 7-inch touchscreen (Tronxy).
缺点
A very large machine that needs a dedicated room and a lot of filament.
No camera in our facts, which matters for long prints in a closed chamber.
Tronxy gives no chamber heating or temperature spec for the enclosure on its page.
Express and air shipments are priced without import duties and taxes, which the buyer pays at customs; Tronxy lists sea shipments as tax-free, door to door.
No independent hands-on review found.
适合谁
学校不太适合
Too big and heavy for a classroom, though enclosed.
业余爱好者可用
Enclosed large prints in ABS are possible, but it is an expensive, space-hungry project machine.
企业适合
Large enclosed parts, jigs and prototypes in ABS or ASA, with Klipper for remote management.
打印农场不太适合
One huge machine rather than many identical ones, and no camera or plate-swap kit in our facts.
Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.
Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.
固件和自定义固件 ●●●●●
Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA.
[8][9][6][7]
本地控制与集成 ●●●●●
We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB.
[7][9][11]
第三方耗材、切片软件和零件 ●●●●●
Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts.
[6][7]
维修和备件 ●●●●●
Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts.
[6]
社区和文档 ●●●●●
Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly.
[4][8][10]
优点
Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
Spare mainboards, hotends and nozzles sold for current and older models.
缺点
Firmware on Tronxy's website is by email request rather than a direct download.
Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
VEHO hotends and print heads are Tronxy-specific parts.
实绩
十月 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024.
[8][9]
十二月 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021.
[2]
中国
Klipper（Moonraker） 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
