A four-colour bed slinger that feeds four filaments into one nozzle, sold here with Creality's CFS Lite. It suits hobbyists who print a lot of multicolour PLA and want tool-changer speed and low waste at a bed slinger's price.
The SPARKX i7 runs Klipper under Creality OS, with Moonraker and Fluidd once rooted. The i8 is built on the same platform, but that isn't confirmed for the i8 yet.
Hands-on test of a beta unit Creality supplied and sponsored. Colour changes took 1-2 seconds with only the prime tower as waste, and multicolour prints ran 2.5 to 4 times faster than on other multicolour bed slingers. Single-colour quality was only decent, it prints PLA and PETG only, and the beta firmware had bugs (nozzle reading about 10 C high, dropped connections).
何时选择Creality SPARKX i8 Combo
Choose it when most of your prints are multicolour PLA or PETG and you want the CFS Lite's filament recognition and sealed storage from day one. The plain SPARKX i8 costs less if you are happy with the four spool holders. Pick the SPARKX i7 if you also print TPU or mostly one colour, or a tool changer such as the Snapmaker U1 if you need materials with different temperatures in one print.
优点
Four colours through one nozzle, with colour changes in 1-2 seconds and almost no purge waste.
Aurora Tech measured multicolour prints 2.5 to 4 times faster than on other multicolour bed slingers, close to tool changers.
Costs far less than a tool changer, and has a 260 x 260 x 255 mm bed and a 500 mm/s top speed.
Arrives 90% pre-assembled. The CFS Lite in the Combo adds RFID filament recognition, automatic loading and unloading, and sealed filament storage.
Expected to work with SimplyPrint like the SPARKX i7, through the SimplyPrint Client or Klipper (not yet tested by us).
Four spool holders on the frame still work if you skip the CFS Lite.
缺点
PLA and PETG only: no TPU, and no mixing filaments that print at very different temperatures, because they share one heat break.
Early units had rough firmware and slicer profiles (false alarms, dropped connections, a PETG profile that needed tuning), so expect updates after launch.
Not shipping yet: it is sold through a crowdfunding campaign, with Creality aiming for deliveries from October and mostly November 2026.
Open frame with a moving bed and no enclosure, and four colours is the maximum.
Single-colour prints were only decent in Aurora Tech's test, with some stringing.
适合谁
学校可用
Multicolour prints are a good hook for students, but the open frame and moving bed offer no enclosure and the firmware is still young.
业余爱好者非常适合
Fast, low-waste multicolour printing is what this printer is built for, as long as you stay with PLA and PETG.
企业可用
Useful for multicolour PLA products, but it is a new design on early firmware, limited to PLA and PETG, and not shipping yet.
打印农场不太适合
One nozzle, an open frame, no plate swapping and early firmware make it a weak fit for unattended batches.
Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026.
成立:
2014 ·
总部:
Shenzhen, China ·
所有权:
Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive ·
网站:www.creality.com
Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions.
固件和自定义固件 ●●●●●
Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access.
[1][2][3][4][5]
本地控制与集成 ●●●●●
Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app.
[6][20][7][21][4][8][22]
第三方耗材、切片软件和零件 ●●●●●
Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs.
[10][11][12]
维修和备件 ●●●●●
Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends).
[12][13][14]
数据与隐私 ●●●●●
Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored.
[15][6]
社区和文档 ●●●●●
One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum.
[16][10][6]
优点
Klipper-based models can be run entirely on the local network through Fluidd, without an account.
Firmware for most current models and the Creality Print slicer are published as source on GitHub.
Wide range, from budget Ender printers to multi-colour K2 machines.
Spare-part kits and model-specific replacement guides are easy to find.
Very large user base, so community help is easy to find.
缺点
Firmware source has usually appeared months after a model ships.
Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max.
The privacy policy says little about printer and cloud data.
The SPARKX line is built around the Creality Cloud app and an account.
实绩
五月 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024.
[16][5]
十一月 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide.
[4][17][3]
九月 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0.
[2][18]
八月 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions.
[1][3][5]
中国
SimplyPrint客户端 
Klipper（Moonraker） 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
Cura
Kiri:Moto
