Открытость: Открыть (4.3 из 5)
Закрытая экосистемаОткрыть

Sovol is a Chinese 3D printer maker founded in 2018 that sells low-cost printers and publishes their designs. Its SV08 is a lower-cost derivative of the open-source Voron 2.4, released with its structure, electronics and firmware files, and most current models run Klipper. Its buyers are mainly hobbyists who like to tinker.

Год основания: 2018 · Веб-сайт: www.sovol3d.com

Sovol is among the most open brands: its printers are standard Klipper machines on open designs, with published files and no cloud. The trade-off is less hand-holding: Tom's Hardware found its larger printer needs experience to tune.

Стандартная и кастомная прошивка
●●●●●		 Sovol publishes firmware source on GitHub; for the SV08 under GPL-3.0 together with structure files and motherboard designs. Newer repositories, such as the SV08 Max, carry no licence file. Sovol says damage caused by modified or third-party firmware voids its one-year warranty and that it does not help with modifying the source. [1][2][3]
Локальное управление и интеграции
●●●●●		 The SV08 family runs Klipper with the Mainsail interface on the local network, so other software can use Moonraker's documented API. Tom's Hardware drove the SV08 from Mainsail, listed 'doesn't require the cloud', and found 'vanilla Klipper' on the SV08 Max. We found no Sovol cloud service or account requirement. [5][4][1][11]
Сторонние филаменты, слайсеры и компоненты
●●●●●		 Built on open designs and Klipper, so any filament can be used; Sovol supplies OrcaSlicer profiles, and Tom's Hardware notes the SV08 also works with Cura or PrusaSlicer using Voron settings and takes Bambu-style nozzles. Hotends and extruders are Sovol parts, sold in its store. [6][1][7]
Ремонт и запчасти
●●●●●		 Sovol's store sells parts per model (hotends, extruders, fans, eMMC modules, heated beds), and the SV08's full CAD and motherboard files are public, so parts can be identified or made. [7][1]
Сообщество и документация
●●●●●		 Strong overlap with the Voron community, which Sovol supports with a donation programme, public GitHub repositories and a wiki; Sovol does not give technical help for modifying the source. [8][1][9]
Преимущества
  • Standard Klipper with Mainsail on the local network, no account or cloud.
  • SV08 structure, electronics and firmware files are published.
  • Spare parts sold per model, and open designs make parts easy to source.
  • Low prices for Voron-style machines.
Недостатки
  • Damage caused by modified or third-party firmware voids the one-year warranty.
  • Sovol does not help with modifying its source code.
  • Tom's Hardware found the SV08's default slicer profiles very conservative and says the SV08 Max needs an experienced hand to tune.
  • Newer repositories (SV08 Max, Zero) have no licence file.
Проверенность
  • июль 2026: Sovol launched the M1D, an open-source IDEX printer with a tool changer, on Kickstarter, where it passed $2.8 million in pledges. [10]
  • март 2024: Sovol released the SV08, a lower-cost derivative of the Voron 2.4, and published its structure, hardware and firmware files on GitHub under GPL-3.0. Sovol says it set up a donation programme with the Voron Design team. [1][8]
Исследовано на основе 11 источников, последняя проверка: 18 октября 2026 г.. Показать источники
  1. Sovol3d/SV08 on GitHub github.com
  2. Sovol3d/klipper on GitHub github.com
  3. Sovol3d/SV08MAX on GitHub github.com
  4. Sovol SV08 Max review: Monster printer | Tom's Hardware tomshardware.com
  5. Sovol SV08 Review: A Speedy Voron Tribute | Tom's Hardware tomshardware.com
  6. Sovol3d/Sovol-OrcaSlicer on GitHub github.com
  7. FDM Parts | Sovol sovol3d.com
  8. About Us | Sovol sovol3d.com
  9. Sovol Wiki wiki.sovol3d.com
  10. Sovol M1D 3D printer is the first open-source IDEX design with an integrated tool-changer | Tom's Hardware tomshardware.com
  11. moonraker.readthedocs.io