The LK10 Plus is a large-format, Klipper-based bedslinger from Longer with a 320 x 320 x 400 mm plate and speeds up to 500 mm/s. It is for hobbyists who want a big plate at a low price.
Longer says it ships Klipper on a 'Klipper high-speed board', and the manual connects OrcaSlicer over LAN with the 'Octo/Klipper' host type, which suggests Moonraker, but no source names Moonraker, Mainsail or Fluidd. Check port 7125 on a unit.
来源
Choose the LK10 Plus when build size matters more than enclosure or multi-material, and you print PLA, PETG, ABS, ASA or TPU. Longer lists it on sale at 419.99 USD (regular 549.99) with automatic eddy-current levelling and a 25 mm³/s high-flow direct-drive extruder. We found no independent review, so its speed and quality claims are the maker's own. For enclosed, easy-to-run printing choose a Bambu Lab P1S instead, and note its SimplyPrint connection is not confirmed here.
优点
Very large 320 x 320 x 400 mm build volume for the price (Longer).
Klipper-based high-speed mainboard, up to 500 mm/s, with a high-flow extruder rated up to 25 mm³/s (Longer).
Automatic bed levelling with an eddy-current sensor and automatic Z offset (Longer).
Prints PLA, PETG, ABS, ASA and TPU, with Wi-Fi and a 4.3-inch colour touchscreen.
Sale price of 419.99 USD and a 12-month warranty (Longer).
缺点
Open frame with no enclosure, so ABS and ASA are harder to print well and hot parts are within reach.
A moving bed at this size can limit quality at high speed; the 500 mm/s figure is a maker claim with no independent test.
SimplyPrint compatibility is unknown for Klipper and unlikely for OctoPrint, so connecting is not assured.
No built-in camera is listed, and no independent review was found.
适合谁
学校不太适合
An open frame with a large moving bed is not safe or quiet enough for a classroom, and a SimplyPrint connection is not confirmed.
业余爱好者适合
A large plate and Klipper at a low price suit tinkerers, though the quality claims are untested by independent reviewers.
企业可用
The size helps with big prototypes, but there is no enclosure and no independent evidence of reliability.
打印农场不太适合
No listed camera, an open frame and an unconfirmed SimplyPrint connection make it a weak fit for many machines running unattended.
Longer (Shenzhen Longer 3D Technology Co., Ltd.) is a Chinese maker of budget FDM and resin 3D printers, laser engravers and UV printers. Its LK series of open-frame bed slingers, up to the LK5 Pro it still sells, is aimed at beginners, and it also built the Alfawise U20 and U30 sold under another name. In 2026 it added the LK10 and LK10 Plus, which run on a Klipper board.
总部:
Shenzhen, China ·
所有权:
Shenzhen Longer 3D Technology Co., Ltd., privately held ·
网站:www.longer.net
Published Marlin source, spare parts and slicer support for the older LK line; we found no published source for the new Klipper-based LK10.
固件和自定义固件 ●●●●●
Longer published Marlin source for the LK1, LK4 Pro and LK5 Pro on GitHub (GPL-3.0, last updated 2022) and Klipper configs for older models (updated 2024). We found no source for the LK10's Klipper firmware.
[9][10][11]
第三方耗材、切片软件和零件 ●●●●●
Any filament, and no Longer slicer is required: Cura ships profiles for the LK1 to LK5 Pro and OrcaSlicer for the LK10 and LK10 Plus. Longer sells nozzle kits and hotend parts; we did not confirm which third-party nozzles fit.
[12][13][6]
维修和备件 ●●●●●
Longer's shop sells LK-series mainboards, touch screens, heated beds, stepper motors, extruders, fans and nozzle kits; it publishes no CAD files.
[6]
社区和文档 ●●●●●
Longer runs a download centre with firmware, slicer builds and manuals, and a GitHub account with firmware source and Klipper configs; we found no official forum.
[7][8]
优点
Low prices for simple, beginner-oriented printers.
Marlin source published for the LK5 Pro and older models.
Spare parts sold, from mainboards to nozzles.
Profiles in both Cura and OrcaSlicer.
缺点
No published source for the new LK10's Klipper firmware.
The LK5 Pro's firmware has not been updated since February 2022.
No official forum or community documentation hub found.
实绩
2026: Longer launched the LK10 and LK10 Plus, bed slingers on a Klipper board rated up to 500 mm/s.
[3][4]
二月 2022: Longer released LK5 Pro firmware V0.4.0, based on Marlin 2; in October 2026 it was still the newest LK5 Pro firmware in Longer's download centre.
[7]
十一月 2020: Longer published the Marlin source for the LK1, LK4 Pro and LK5 Pro on GitHub under the GPL-3.0.
[9]
中国
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
