The M1 Pro is Artillery's enclosed CoreXY with a 260 mm build cube, a 320 degrees C hardened nozzle, a heated chamber and carbon filtration. It is for hobbyists who want a closed, fast printer for ABS, ASA and carbon-filled nylons at a low price.
Artillery OS is 'based on Klipper' but closed ('SSH connection is not supported. Artillery OS is a closed-source system'); nothing shows whether Moonraker is reachable.
来源
Choose the M1 Pro if you want an enclosed, actively heated printer for engineering materials at a price well below the big brands: Artillery lists it from $349. It is a less proven brand and we found no independent review of the M1 Pro. Artillery OS is based on Klipper but is a customised system, not unlocked Klipper, so do not count on a Klipper route to SimplyPrint. If you want a printer with a known SimplyPrint route and a large community, the Creality K2 or Bambu Lab P2S is the safer pick.
优点
Enclosed with active chamber heating up to 60 degrees C, a glass door and a carbon filter (Artillery).
A 320 degrees C hardened steel nozzle and a bed up to 120 degrees C, for PLA through ABS, ASA, PC and carbon-filled nylons (Artillery).
CoreXY with a 600 mm/s top speed, linear rails and a cast aluminium frame (Artillery).
An onboard camera that pauses the print when it sees a fault, and a 4.3-inch touchscreen (Artillery).
Artillery gives 55 dB with the door closed and under 45 dB in silent mode (Artillery).
缺点
Runs a customised Artillery OS, not unlocked Klipper, and our facts mark both Klipper and OctoPrint as unknown or unlikely, so SimplyPrint support is not confirmed.
Wi-Fi is 2.4 GHz only and Bluetooth is not available (Artillery).
Ships from China with a flat $30 shipping fee, and customs may add duties (Artillery).
The multi-colour system was announced for a later date, so check whether it exists before buying for colour (Artillery).
No independent review found.
适合谁
学校可用
Enclosed, filtered and quiet in silent mode, but SimplyPrint support is unconfirmed, so approval queueing is not assured.
业余爱好者适合
An enclosed, heated-chamber printer for engineering materials at a low price, from a less proven maker.
企业可用
Capable materials, but a short track record, no independent review and no confirmed SimplyPrint route.
打印农场不太适合
A customised OS with no confirmed remote-management route and an unproven track record make it a weak fleet choice.
谁制造了Artillery 3D M1 Pro，以及Artillery 3D的开放程度：其打印机能否在不使用其云服务的情况下运行，是否支持任意耗材和切片软件，以及能否维修。各项均根据公开来源评分。
开放性：混合（5分制3.3分）
混合
封闭生态系统打开
Artillery is a Chinese consumer 3D printer brand founded in 2018; it says it is headquartered in Hong Kong. It is known for the Sidewinder, a large and inexpensive bed slinger, and the smaller Genius and Hornet. The Sidewinder X4 moved to Klipper in 2024, and the M1 Pro, an enclosed CoreXY on Artillery's Klipper-based Artillery OS, followed in 2025. Its buyers are mostly hobbyists on a budget.
Standard nozzles, OrcaSlicer support and a deep parts shop, but the current Klipper-based firmware is customised and its source is not published.
固件和自定义固件 ●●●●●
Artillery published Marlin source for the Sidewinder X1 and X2, Genius and Hornet on GitHub (GPL-3.0, last updated 2022-2023), but we found no published source for the Klipper firmware of the X4 or M1 Pro. Asked whether the M1 Pro ships with unlocked Klipper, Artillery answers that it runs a 'customized Artillery OS'.
[10][3]
本地控制与集成 ●●●●●
The X4 runs Klipper with Fluidd over Wi-Fi, and Artillery's M1 support guides refer to Fluidd as well, which implies Moonraker's documented API. Artillery says the M1 Pro prints over Wi-Fi and the local network and can be monitored locally through its slicer, and names no account requirement, but describes its system only as a 'customized Artillery OS' and says nothing about access for other software.
[4][3][16][17]
第三方耗材、切片软件和零件 ●●●●●
Any filament; OrcaSlicer includes Artillery profiles from the Sidewinder X1 to the X4 and M1 Pro, and the X3 and X4 use standard Volcano-type brass nozzles and V6 heatbreaks. The M1 Pro's own slicer is a custom OrcaSlicer build.
[15][5][3]
维修和备件 ●●●●●
Artillery's shop sells parts one by one, down to screws, bearings, belts, motors, mainboards and screens, for the X2, X3, X4 and M1 series. It publishes no CAD files.
[5][6][7]
数据与隐私 ●●●●●
Printing on the local network needs no account. Artillery's privacy policy is its web shop's and does not describe what the printers or their cameras send.
[8]
社区和文档 ●●●●●
Artillery runs an official wiki, a YouTube channel and a Facebook page; its GitHub firmware repositories have not been updated for the current models.
[9][1][10]
优点
Low prices for large bed slingers and an enclosed CoreXY.
Spare parts sold one by one, down to screws and belts.
OrcaSlicer has profiles for current models, so you are not tied to Artillery's slicer.
Prints over the local network without an Artillery account.
缺点
No published source for the Klipper-based firmware on the X4 and M1 Pro.
A review Artillery republished found the X4's Klipper version dated.
The privacy policy covers the web shop, not the printers or cameras.
The Sidewinder X4 was out of stock in Artillery's EU shop in October 2026.
实绩
2025: Artillery launched the M1 Pro, an enclosed CoreXY on its Klipper-based Artillery OS with a custom OrcaSlicer build; asked if the firmware is unlocked Klipper, Artillery calls it a customised Artillery OS.
[3]
四月 2024: The Sidewinder X4 Plus and X4 Pro moved from Marlin to Klipper with the Fluidd web interface; a review Artillery republished found the Klipper and component versions dated.
[4]
九月 2021: Artillery published the Marlin source for the Sidewinder X2 and Genius Pro on GitHub, after the Hornet in April 2021.
[13][14]
十一月 2019: Artillery published the Marlin source for the Sidewinder X1 on GitHub; the Genius followed in December 2019.
[11][12]
中国
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
