Otwartość: Mieszane (2.9 z 5)
Zamknięty ekosystemOtwarte

PROTEOR is a French orthotics and prosthetics (O&P) company headquartered in Dijon, founded by the Pierron family and active for more than 110 years. In February 2025 it bought Filament Innovations, maker of the ICARUS printers that O&P clinics use to print prosthetic sockets, braces and orthoses, and it now sells them in the US as part of its PROTEOR Digital Suite with scanning and design software. These are specialist clinic machines, not general-purpose printers.

Siedziba główna: Dijon, France · Własność: Pierron family (majority shareholder); ARDIAN Growth and BNP Paribas Développement invested in late 2020 · Strona internetowa: www.proteordigital.com

Mixed, judged on four of six areas: open-source-based electronics and PrusaSlicer support, but a cloud-centred workflow, a material marketed as exclusive and little public documentation.

Firmware i niestandardowe firmware
●●●●●		 The ICARUS printers are built on Duet electronics, whose standard RepRapFirmware is open source; we found no published PROTEOR firmware or configuration. [2][3]
Sterowanie lokalne i integracje
●●●●●		 The ICARUS printers run on Duet electronics, connect over Wi-Fi, Ethernet or USB and can be sliced in PrusaSlicer, but remote monitoring and control, shared files and the online slicer run through PROTEOR Print OS, a cloud platform. Duet's HTTP interface is documented, but PROTEOR does not say whether it is open to other software on its printers. [2][4][11]
Filament, slicery i części innych firm
●●●●●		 PrusaSlicer is supported alongside PROTEOR's online slicer, and PROTEOR sells 1.75 mm filament and pellets; but the printers are marketed around its exclusive CPX-KyronMAX material and its own high-flow extruder. [2][5][6]
Społeczność i dokumentacja
●●●●●		 Little public documentation: we found no public manuals, forum or code. PROTEOR says it added an Academy with installation, maintenance and software videos in early 2026, and support comes from its digital team. [4][1]
Zalety
  • Built for O&P: prints definitive sockets and braces in hours with a high-flow extruder.
  • Part of one clinic workflow: scanning, design and printing from the same company.
  • PrusaSlicer is supported, not only PROTEOR's own slicer.
  • Backed by an O&P company with more than 110 years of history.
Wady
  • Remote management and the online slicer depend on PROTEOR's cloud platform.
  • Little public documentation; spare parts and repair information are not published.
  • Marketed around an exclusive material (CPX-KyronMAX).
  • Specialist machines for O&P clinics, not general-purpose printers.
Doświadczenie
  • 2026: PROTEOR added an Academy to its Print OS platform in the first quarter of 2026, with videos on installation, maintenance and software. [4]
  • 5 lutego 2025: PROTEOR announced it had acquired Filament Innovations, maker of the ICARUS 3D printer and co-developer of the CPX-KyronMAX filament, adding 3D printing to its digital O&P portfolio. [8][9][10]
  • 2020: In late 2020 the investors ARDIAN Growth and BNP Paribas Développement joined the Pierron family, which remains the majority shareholder, to fund international growth. [7]
Na podstawie 11 źródeł, ostatnia weryfikacja: 18 października 2026. Pokaż źródła
  1. PROTEOR Digital Suite | Evolving the Tools, Respecting the Craft proteordigital.com
  2. ICARUS PRO - PROTEOR Print | USA proteordigital.com
  3. ICARUS LITE - PROTEOR Print | USA proteordigital.com
  4. PROTEOR Print OS - PROTEOR Print | USA proteordigital.com
  5. PROTEOR Print - PROTEOR Digital Suite proteordigital.com
  6. All Products | USA | PROTEOR Digital Suite proteordigital.com
  7. The PROTEOR Group proteor.com
  8. PROTEOR Acquires Filament Innovations - Proteor USA us.proteor.com
  9. Proteor Acquires 3D Printer Filament Innovations - The O&P EDGE opedge.com
  10. PROTEOR Targets Next-Gen O&P Manufacturing with Filament Innovations Acquisition - 3D Printing Industry 3dprintingindustry.com
  11. github.com