Otwartość: Otwarte (4.8 z 5)
Zamknięty ekosystemOtwarte

Modix (Modix Modular Technologies Ltd.) is an Israeli maker of large-format FFF printers, from the 600 mm BIG-60 to the two-metre-tall Everest, plus the MAMA pellet printers. It began with desktop printers in 2015 and moved to large format in 2017; its customers are engineering, production and prototyping teams in automotive, aerospace, education and similar fields.

Siedziba główna: Israel · Własność: Modix Modular Technologies Ltd. · Strona internetowa: www.modix3d.com

Open: open-source Duet firmware, fully offline operation, any filament and any slicer, and upgrade paths for older machines. Only the print heads and some documentation are Modix's own.

Firmware i niestandardowe firmware
●●●●●		 Modix printers run open-source RepRapFirmware on an off-the-shelf Duet 3 board, which Modix says owners can replace; its Duet configuration and macro files are on GitHub, and upstream Klipper also has a BIG-60 config. [3][7][8]
Sterowanie lokalne i integracje
●●●●●		 Modix states its printers run fully offline with no cloud account or internet connection, controlled through Duet Web Control from any browser on the network; Ethernet is standard and Wi-Fi is a removable dongle. RepRapFirmware's HTTP interface is documented, with OpenAPI files, and Duet3D says third-party applications may use it. [3][9]
Filament, slicery i części innych firm
●●●●●		 Any 1.75 mm filament and any slicer that exports G-code, with tested PrusaSlicer and Cura profiles. The Griffin print heads are Modix's own design. [3][1]
Naprawy i części zamienne
●●●●●		 Modix sells spare print-head, electronics and motion parts and maintenance kits, and ships each new generation as upgrades for machines already in use (GEN5 parts fit earlier Modix printers). [5][1][4]
Dane i prywatność
●●●●●		 No account, cloud or internet connection is needed to run the printers, and Modix offers air-gapped and closed access-point setups for restricted sites; data stays on your network. [3][1]
Społeczność i dokumentacja
●●●●●		 Configuration files on GitHub and a public specs and news site, but slicer profiles are distributed through a Customer Zone and the user base is small and professional. [7][3]
Zalety
  • Runs fully offline on open-source RepRapFirmware, with no account needed.
  • Very large build volumes; the BIG-60 starts at 5,700 USD.
  • New generations are offered as upgrades for printers already owned.
  • Any 1.75 mm filament, and a pellet option on the MAMA line.
Wady
  • The V4-generation models in our catalogue are no longer sold; current machines are GEN5.
  • Slicer profiles come through a Customer Zone rather than publicly.
  • Small, professional user community.
  • Print heads (Griffin) are Modix's own design.
Doświadczenie
  • wrzesień 2026: Modix launched Generation 5, a Duet 3 platform with CAN-bus print-head electronics, Ethernet as standard and removable Wi-Fi, offered both on new printers and as an upgrade for machines already in the field. [4][1]
  • wrzesień 2025: Modix began delivering the MAMA-1700 pellet printer, announced in June 2024. [4]
  • listopad 2022: Modix announced Generation 4 of its BIG line, with IDEX dual extruders and automated calibration. [4]
Na podstawie 9 źródeł, ostatnia weryfikacja: 18 października 2026. Pokaż źródła
  1. Modix Large-Format 3D Printers | 600 mm to 3 m Build Size modix3d.com
  2. About Modix modix3d.com
  3. Tech Specs - Modix modix3d.com
  4. News - Modix modix3d.com
  5. Upgrade Center - Modix modix3d.com
  6. Privacy Policy - Modix modix3d.com
  7. Modix3D / Modix-V3-configuration-and-Macro-files (GitHub) github.com
  8. Klipper: printer-modix-big60-2020.cfg github.com
  9. github.com