Otwartość: Przeważnie zamknięta (2.3 z 5)
Zamknięty ekosystemOtwarte

Bambu Lab is a Shenzhen company founded in 2020 by former DJI engineers. It makes FDM printers in four families (A, P, X and H), the AMS multi-material units, the Bambu Studio slicer, the Bambu Handy app and the MakerWorld model site, and designs them to be used together. Its printers are used by beginners, hobbyists, schools and print farms.

Założono: 2020 · Siedziba główna: Shenzhen, China · Własność: Privately held; founded by CEO Ye Tao and other former DJI staff, with venture investors (BGR, 2026) · Strona internetowa: bambulab.com

Bambu Lab works like Apple: printer, slicer, app, cloud and multi-material system come from one company and are made to work together. Filament and slicer choice stay open, but the firmware is closed and signed, and since 2025 third-party control needs Bambu Connect or the unsupported Developer Mode.

Firmware i niestandardowe firmware
●●●●●		 The printer firmware is Bambu's own and closed; in 2022 Bambu said it would keep it in-house. Its security white paper describes secure boot that only runs verified firmware on X1, H2, P1 and A1 printers. Bambu publishes the GPL parts it uses (Linux kernel, U-Boot, BusyBox) but not the printer software. Rooting the X1 only became possible through a security flaw the X1Plus project used in 2024; Bambu then published a one-off rootable X1 firmware for owners who give up their warranty, and blocks rooting in later firmware. [1][2][3][4][22]
Sterowanie lokalne i integracje
●●●●●		 LAN Only mode prints and monitors from Bambu Studio or Bambu Connect without internet or an account; the Handy app, printing from outside the network and print history need Bambu's cloud. Since the 2025 authorization firmware, other software can only read status in normal mode. Full control needs Developer Mode, which cuts the cloud link and which Bambu says it cannot support because the protocols are not official. Bambu documents no local protocol; it offers a file hand-off to Bambu Connect and a Local Server SDK on application. [23][24][6][7][5]
Filament, slicery i części innych firm
●●●●●		 Third-party filament works, and Bambu publicly denied in 2025 that it would restrict it. OrcaSlicer and other slicers can be used, but since the 2025 firmware they send and control prints through Bambu Connect or Developer Mode. Hotends are Bambu's own designs, and Bambu says it cannot promise long-term support for accessories that control the printer unless it approved them first. [7][6][4]
Naprawy i części zamienne
●●●●●		 Bambu's store sells individual spare parts down to motors, belts, encoders and boards, and its wiki has step-by-step replacement guides for each model (for example the P2S hotend and the H2D/H2C AP board). Many parts, hotends included, are Bambu-specific, so spares come from Bambu. [8][9][10]
Dane i prywatność
●●●●●		 Cloud features need a Bambu account, while LAN Only mode keeps jobs on the local network. Bambu publishes a Trust Center and a 38-page security white paper, says it holds ISO/IEC 27001, ISO/IEC 27701 and TRUSTe certifications, and runs a paid bug bounty. In August 2023 a cloud outage made some printers start earlier jobs on their own; Bambu apologised. [2][11][5][12]
Społeczność i dokumentacja
●●●●●		 Very large user community, the MakerWorld model site, a detailed wiki and a blog where Bambu explains its policy changes. Bambu Studio is developed in public on GitHub with an open issue tracker. The printer protocol is not documented, and Developer Mode is unsupported. [13][5][7]
Zalety
  • Printer, slicer, app and AMS come from one company and are designed to work together, which makes a first setup simple.
  • Step-by-step repair guides for each model and individual spare parts sold in Bambu's store.
  • LAN Only mode works without internet or an account.
  • Bambu Studio is open source, and third-party filament works.
  • Publishes security certifications and runs a public bug bounty.
Wady
  • Firmware is closed and signed; current models have no supported way to run custom firmware.
  • Since the 2025 firmware, third-party software and accessories need Bambu Connect or the unsupported Developer Mode to control the printer.
  • Remote printing, the Handy app and print history depend on Bambu's cloud.
  • Hotends and many parts are Bambu-specific, so spares come from Bambu.
  • In 2026 a US jury found the X1, P1 and A1 infringe Stratasys patents; Bambu is appealing.
Doświadczenie
  • wrzesień 2026: A US federal jury in Texas found that Bambu Lab's X1, P1 and A1 printers infringe Stratasys patents on prime towers and bed levelling, and awarded Stratasys $27.6 million. No injunction was placed on the printers. Bambu told Tom's Hardware it disagrees with the verdict and intends to seek post-trial review and appeal. Stratasys had filed two suits in 2024; more patents are still to be decided. [14]
  • maj 2026: Bambu Lab pressed the developer of 'OrcaSlicer-bambulab', a fork that restored direct cloud printing from OrcaSlicer, to remove it, according to Manufactur3D. On 7 May Bambu said the fork impersonated the official Bambu Studio client to its cloud, which its user agreement does not allow, and that modifying and sharing its AGPL code remains fine. The developer disputed the claims. [15][16][17]
  • październik 2025: Bambu Lab opened a Trust Center with a security white paper and listed ISO/IEC 27001, ISO/IEC 27701 and TRUSTe privacy certifications. A year later it said its bug bounty had worked with over 100 researchers and that it had added a public security update log. [2][11]
  • 20 stycznia 2025: After criticism from users and print farms, Bambu Lab announced an optional Developer Mode for X1, P1, A1 and A1 mini that leaves MQTT, FTP and the live stream open for third-party software in LAN mode, without official support. It also said LAN mode via Bambu Connect needs neither internet nor an account, and that third-party filament would not be restricted. [7]
  • 16 stycznia 2025: Bambu Lab announced firmware with 'authorization control', first for the X1: starting prints, moving axes, changing temperatures and binding the printer now require Bambu-approved software, also in LAN mode. On updated printers, third-party slicers and accessories such as the Panda Touch could no longer control the printer except through Bambu Connect; reading status still worked. Bambu cited security and up to 30 million unauthorised cloud requests a day; older firmware stayed optional. [6]
  • marzec 2024: After the X1Plus jailbreak, Bambu Lab published a one-off rootable firmware for the X1 series for owners who give up their warranty support. It said it does not support X1Plus, and that firmware after it would block rooting again. [4]
  • luty 2024: Bambu Lab extended its A1 heatbed-cable callback to a recall of all A1 printers and asked owners to stop using them. It reported electrical faults in under 0.1% of units and offered a full refund plus an $80 voucher, or a redesigned heatbed plus a $120 voucher and six extra months of warranty. The A1 mini was not affected. [18][19]
  • styczeń 2024: Community developers rooted the X1 series through a security flaw in its firmware (up to version 1.07) and released the X1Plus custom firmware. Bambu Lab closed the flaw in later firmware. [22]
  • sierpień 2023: During a Bambu cloud outage on 15 August 2023, some printers started print jobs without user action, because jobs stuck in the cloud were resent when service returned. Bambu apologised, took responsibility and said it would add checks before a print starts. [12]
  • maj 2022: Before its first printers shipped, Bambu Lab said its firmware would stay closed and in-house to remain competitive, and promised to open-source everything if the company ever could not survive. [1]
Na podstawie 24 źródeł, ostatnia weryfikacja: 20 października 2026. Pokaż źródła
  1. To open, or not to open, that is the question blog.bambulab.com
  2. The Bambu Lab Trust Center for Complete Security and Privacy Transparency blog.bambulab.com
  3. Open Source Software | Bambu Lab Wiki wiki.bambulab.com
  4. Custom Firmware Plan and Our Principles on Ecosystem blog.bambulab.com
  5. How to enable LAN Mode on Bambu Lab printers | Bambu Lab Wiki wiki.bambulab.com
  6. Firmware Update Introducing New Authorization Control System blog.bambulab.com
  7. Updates and Third-Party Integration with Bambu Connect blog.bambulab.com
  8. 3D Printer Parts | Bambu Lab EU Store eu.store.bambulab.com
  9. Hotend Replacement Guide for the P2S | Bambu Lab Wiki wiki.bambulab.com
  10. Replace H2D/H2C AP Board | Bambu Lab Wiki wiki.bambulab.com
  11. One Year On: strengthening IoT Security through Global Certifications and Community Collaboration blog.bambulab.com
  12. Initial Investigation in the Bambu Cloud Temporary Outage blog.bambulab.com
  13. bambulab/BambuStudio on GitHub github.com
  14. Texas jury hits Bambu Lab with $27.6M verdict in Stratasys patent fight | Tom's Hardware tomshardware.com
  15. Bambu Lab OrcaSlicer controversy escalates | Manufactur3D manufactur3dmag.com
  16. Setting the record straight on Cloud Access and Community blog.bambulab.com
  17. jarczakpawel/OrcaSlicer-bambulab on GitHub github.com
  18. A1 Recall Update blog.bambulab.com
  19. A1 Heatbed Cable Callback blog.bambulab.com
  20. Who Owns Bambu Lab, The 3D Printer Manufacturer? | BGR bgr.com
  21. Bambu Lab A2L - Creative Playground. Extra Large. blog.bambulab.com
  22. X1Plus: Open Source Bambu Lab X1 Firmware | Hackaday hackaday.com
  23. wiki.bambulab.com
  24. wiki.bambulab.com