# 3D print directly from Fusion 360 - export, slice and print in one click

**Categories:** Third party, Verified

**Developer:** [SimplyPrint](https://simplyprint.io)
**Launched:** Jun 10, 2026

Send your CAD models directly from Fusion 360 to SimplyPrint for slicing and printing

## About

The SimplyPrint add-in for Autodesk Fusion 360 bridges the gap between CAD design and 3D printing.
Model in Fusion, then send your design straight to your printer in a single click - no separate export step, no juggling files between programs.

New to this? Read the full walkthrough: [how to 3D print from Fusion 360](/articles/3d-print-from-fusion-360).

The add-in adds a **SimplyPrint** button to Fusion's **UTILITIES** panel (and next to the built-in 3D Print button on the **MAKE** panel).
Pick **STL** or **3MF**, choose what to export, tweak the mesh quality, hit **Send**, and SimplyPrint opens in your browser with the model loaded - ready to slice, queue, or print.


**

The add-in is available on the Autodesk App Store - install it in a couple of clicks on both Windows and macOS. Steps are below.





*




#### How to install




- Get the add-in from the Autodesk App Store:
[
* Get it on the Autodesk App Store
](https://marketplace.autodesk.com/apps/a71a3fdd-b7b6-40e2-97d8-4c6bbcbbab5a)

- Close Fusion 360, then run the downloaded installer - it drops the add-in straight into Fusion's AddIns folder on Windows or macOS.

- Open Fusion 360, press Shift+S, and open the **Add-Ins** tab.

- Select **SimplyPrintExport**, click **Run**, and tick **Run on Startup** so it loads automatically next time.




#### Getting started

Click the **SimplyPrint** button on the **UTILITIES** panel (or next to the 3D Print button on **MAKE**) to open the dialog.
Click **Log in** the first time - a browser tab opens, you approve the request, and you're set for future sessions.
Pick the format, scope, units and mesh quality you want, then hit **Send**.
Your browser opens SimplyPrint with the model uploaded, ready to slice, queue, or print on one or more printers.

## Key features

- Export STL or 3MF directly from Fusion 360 to SimplyPrint
- Send the whole design, a selection of bodies, or just specific components
- Tune mesh quality with Low / Medium / High presets - or fine-tune surface deviation, normal deviation and edge length in Custom mode
- Chunked uploads for huge designs - multi-hundred-megabyte exports just work
- Works on Windows and macOS

*Note: SimplyPrint is not affiliated with Autodesk Fusion 360.*

**Learn more:** [Fusion 360](https://help.simplyprint.io/en/article/the-fusion-360-integration-send-designs-straight-to-simplyprint-bq1h60/)

---

**Full page:** [SimplyPrint Integrations - Fusion 360](https://simplyprint.io/integrations/fusion)