# Zortrax M300 Plus: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Zortrax, Poland
- Launched October 8, 2018
- Canonical page: https://simplyprint.io/compatibility/zortrax-m300-plus

## Zortrax M300 Plus at a glance

The Zortrax M300 Plus is a 3D printer by Zortrax with a 300 x 300 x 300 mm build volume.

- Build volume: 300 x 300 x 300 mm
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Zortrax M300 Plus to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | Prints only Z-SUITE's own job files, sent over the network or from a USB stick; no USB serial printing. ([Source](https://zortrax.com/3d-printers/m300-plus/)) |
| Klipper (Moonraker) | Not compatible |  | Closed Zortrax firmware on an Android-based controller; no Klipper. ([Source](https://zortrax.com/3d-printers/m300-plus/)) |

## What slicer to use for the Zortrax M300 Plus

None of the slicers in SimplyPrint's cloud can slice for the Zortrax M300 Plus that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Zortrax M300 Plus · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Zortrax M300 Plus · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Zortrax M300 Plus · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Zortrax M300 Plus · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Zortrax M300 Plus · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Zortrax M300 Plus · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Zortrax M300 Plus · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Zortrax M300 Plus.

## The app for the Zortrax M300 Plus

Zortrax's own app is [Zortrax inCloud](https://zortrax.com/3d-printers/m300-dual/).


## Zortrax M300 Plus specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 300 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 300 mm

### Printing

- Max extruder temperature: 290 °C
- Has heated bed: Yes
- Max bed temperature: 105 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Zortrax
- Printer model name: M300 Plus
- Made by a company from: Poland
- Launched: October 8, 2018
- Still made: Yes

[Read more by the manufacturer](https://zortrax.com/3d-printers/m300-plus/)

## What filament can the Zortrax M300 Plus print?

Filament compatibility for the Zortrax M300 Plus: the materials Zortrax lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Zortrax M300 Plus that work with SimplyPrint

- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab H2D Combo](https://simplyprint.io/compatibility/bambu-lab-h2d-combo): Verified by SimplyPrint, 325 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab H2C Combo](https://simplyprint.io/compatibility/bambu-lab-h2c-combo): Verified by SimplyPrint, 330 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Zortrax M300 Plus

- [Zortrax's global store](https://simplyprint.io/buy/8400) (Official store)

## Frequently asked questions

### Is the Zortrax M300 Plus compatible with SimplyPrint?

To our knowledge the Zortrax M300 Plus is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Zortrax M300 Plus?

None of the slicers in SimplyPrint's cloud can slice for the Zortrax M300 Plus that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Zortrax M300 Plus print?

Zortrax lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Polycarbonate (PC) for the M300 Plus.

### What is the Zortrax M300 Plus's bed size and build volume?

The Zortrax M300 Plus has a 300 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 300 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Zortrax M300 Plus come out?

Zortrax launched the M300 Plus on October 8, 2018.

### Where can I buy the Zortrax M300 Plus?

From Zortrax's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.