# Zortrax M300 Dual: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Zortrax, Poland
- Launched May 2019
- Canonical page: https://simplyprint.io/compatibility/zortrax-m300-dual

## Zortrax M300 Dual at a glance

The Zortrax M300 Dual is a 3D printer by Zortrax with a 265 x 265 x 300 mm build volume.

- Build volume: 265 x 265 x 300 mm
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Zortrax M300 Dual to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | Prints only Z-SUITE's own job files, sent over the network or from a USB stick; no USB serial printing. ([Source](https://zortrax.com/3d-printers/m300-dual/)) |
| Klipper (Moonraker) | Not compatible |  | Closed Zortrax firmware on an Android-based controller; no Klipper. ([Source](https://zortrax.com/3d-printers/m300-dual/)) |

## What slicer to use for the Zortrax M300 Dual

None of the slicers in SimplyPrint's cloud can slice for the Zortrax M300 Dual that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Zortrax M300 Dual · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Zortrax M300 Dual · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Zortrax M300 Dual · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Zortrax M300 Dual · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Zortrax M300 Dual · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Zortrax M300 Dual · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Zortrax M300 Dual · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Zortrax M300 Dual.

## The app for the Zortrax M300 Dual

Zortrax's own app is [Zortrax inCloud](https://zortrax.com/3d-printers/m300-dual/).


## Zortrax M300 Dual specifications: bed size, print height and more

### Size

- Build volume: 265 x 265 x 300 mm
- Bed type: Square
- Bed size: 265 x 265 mm
- Max print height: 300 mm

### Printing

- Max extruder temperature: 310 °C
- Has heated bed: Yes
- Max bed temperature: 105 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Zortrax
- Printer model name: M300 Dual
- Made by a company from: Poland
- Launched: May 2019
- Still made: Yes

[Read more by the manufacturer](https://zortrax.com/3d-printers/m300-dual/)

## What filament can the Zortrax M300 Dual print?

Filament compatibility for the Zortrax M300 Dual: the materials Zortrax lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the Zortrax M300 Dual that work with SimplyPrint

- [Voron Voron Trident](https://simplyprint.io/compatibility/voron-voron-trident): Compatible, 350 x 350 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [FrankenVoron Tridex](https://simplyprint.io/compatibility/frankenvoron-tridex): Expected to work, 225 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [SnakeOil-XY SnakeOil-XY](https://simplyprint.io/compatibility/snakeoil-xy-snakeoil-xy): Compatible, 250 x 240 x 230 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Zortrax M300 Dual

- [Zortrax's global store](https://simplyprint.io/buy/8399) (Official store)

## Frequently asked questions

### Is the Zortrax M300 Dual compatible with SimplyPrint?

To our knowledge the Zortrax M300 Dual is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Zortrax M300 Dual?

None of the slicers in SimplyPrint's cloud can slice for the Zortrax M300 Dual that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Zortrax M300 Dual print?

Zortrax lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the M300 Dual.

### What is the Zortrax M300 Dual's bed size and build volume?

The Zortrax M300 Dual has a 265 x 265 mm print bed and prints up to 300 mm tall, a build volume of about 265 x 265 x 300 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Zortrax M300 Dual come out?

Zortrax launched the M300 Dual in May 2019.

### Where can I buy the Zortrax M300 Dual?

From Zortrax's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.