# Zortrax M200 Plus: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Zortrax, Poland
- Launched March 2018
- Canonical page: https://simplyprint.io/compatibility/zortrax-m200-plus

## Zortrax M200 Plus at a glance

The Zortrax M200 Plus is a 3D printer by Zortrax with a 200 x 200 x 180 mm build volume.

- Build volume: 200 x 200 x 180 mm
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Zortrax M200 Plus to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | Prints only Z-SUITE's own job files, sent over the network or from a USB stick; no USB serial printing. ([Source](https://zortrax.com/3d-printers/m200-plus/)) |
| Klipper (Moonraker) | Not compatible |  | Closed Zortrax firmware on an Android-based controller; no Klipper. ([Source](https://zortrax.com/3d-printers/m200-plus/)) |

## What slicer to use for the Zortrax M200 Plus

None of the slicers in SimplyPrint's cloud can slice for the Zortrax M200 Plus that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Zortrax M200 Plus · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Zortrax M200 Plus · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Zortrax M200 Plus · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Zortrax M200 Plus · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Zortrax M200 Plus · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Zortrax M200 Plus · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Zortrax M200 Plus · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Zortrax M200 Plus.

## The app for the Zortrax M200 Plus

Zortrax's own app is [Zortrax inCloud](https://zortrax.com/3d-printers/m300-dual/).


## Zortrax M200 Plus specifications: bed size, print height and more

### Size

- Build volume: 200 x 200 x 180 mm
- Bed type: Square
- Bed size: 200 x 200 mm
- Max print height: 180 mm

### Printing

- Max extruder temperature: 290 °C
- Has heated bed: Yes
- Max bed temperature: 105 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Zortrax
- Printer model name: M200 Plus
- Made by a company from: Poland
- Launched: March 2018
- Still made: Yes

[Read more by the manufacturer](https://zortrax.com/3d-printers/m200-plus/)

## What filament can the Zortrax M200 Plus print?

Filament compatibility for the Zortrax M200 Plus: the materials Zortrax lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Zortrax M200 Plus that work with SimplyPrint

- [Flashforge Adventurer 5M Pro](https://simplyprint.io/compatibility/flashforge-adventurer-5m-pro): Compatible, 220 x 220 x 220 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Wanhao D6 Plus](https://simplyprint.io/compatibility/wanhao-d6-plus): Compatible, 200 x 200 x 175 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [QIDI X-Smart 3](https://simplyprint.io/compatibility/qidi-x-smart-3): Compatible, 175 x 180 x 170 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [LulzBot Mini 3](https://simplyprint.io/compatibility/lulzbot-mini-3): Compatible, 180 x 180 x 180 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Zortrax M200 Plus

- [Zortrax's global store](https://simplyprint.io/buy/8398) (Official store)

## Frequently asked questions

### Is the Zortrax M200 Plus compatible with SimplyPrint?

To our knowledge the Zortrax M200 Plus is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Zortrax M200 Plus?

None of the slicers in SimplyPrint's cloud can slice for the Zortrax M200 Plus that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Zortrax M200 Plus print?

Zortrax lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Polycarbonate (PC) for the M200 Plus.

### What is the Zortrax M200 Plus's bed size and build volume?

The Zortrax M200 Plus has a 200 x 200 mm print bed and prints up to 180 mm tall, a build volume of about 200 x 200 x 180 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Zortrax M200 Plus come out?

Zortrax launched the M200 Plus in March 2018.

### Where can I buy the Zortrax M200 Plus?

From Zortrax's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.