# Zonestar Z9V5 Pro: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the Zonestar Z8.

- By Zonestar, China
- Launched 2021
- Canonical page: https://simplyprint.io/compatibility/zonestar-z9v5-pro

## Zonestar Z9V5 Pro at a glance

The Zonestar Z9V5 Pro is a 3D printer by Zonestar with a 300 x 300 x 400 mm build volume.

- Build volume: 300 x 300 x 400 mm
- Max print speed: 100 mm/s
- Motion system: CoreXY
- Prints well: PLA, PETG
- Connectivity: USB, SD card

## Connect the Zonestar Z9V5 Pro to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through OctoPrint |
| OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | Marlin-based with a USB-connected 32-bit board, like the Z8. ([Source](https://github.com/ZONESTAR3D/Z9/tree/main/Z9V5/Z9V5-MK6)); Expected to work like the Zonestar Z8 |
| Klipper (Moonraker) | Not compatible |  | Ships Marlin, not Klipper. ([Source](https://github.com/ZONESTAR3D/Z9/tree/main/Z9V5/Z9V5-MK6)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on Zonestar Z9V5 Pro](https://simplyprint.io/setup-guide/zonestar/z9v5-pro.md)
- [How to set up OctoPrint on Zonestar Z9V5 Pro](https://simplyprint.io/compatibility/zonestar-z9v5-pro/octoprint-setup)

- [Help us confirm](https://simplyprint.io/compatibility/zonestar-z9v5-pro/confirm)

### What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Zonestar Z9V5 Pro lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

## What slicer to use for the Zonestar Z9V5 Pro

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Zonestar Z9V5 Pro, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Zonestar Z9V5 Pro · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Zonestar Z9V5 Pro · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Zonestar Z9V5 Pro · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Zonestar Z9V5 Pro · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Zonestar Z9V5 Pro · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Zonestar Z9V5 Pro · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Zonestar Z9V5 Pro · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Zonestar Z9V5 Pro.

## The app for the Zonestar Z9V5 Pro

Zonestar doesn't make an app for the Zonestar Z9V5 Pro. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Zonestar Z9V5 Pro to SimplyPrint, free](https://simplyprint.io/setup-guide/zonestar/z9v5-pro) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Zonestar Z9V5 Pro

**CoreXY printers push their prints off.** The Zonestar Z9V5 Pro's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.

### Ways to automate it

- [Push prints off with the toolhead](https://simplyprint.io/features/autoprint/push-off): On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Zonestar Z9V5 Pro specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 400 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 400 mm

### Printing

- Motion system: CoreXY
- Max print speed: 100 mm/s
- Max extruder temperature: 260 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB, SD card
- Supports serial printing: Yes
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Zonestar
- Printer model name: Z9V5 Pro
- Made by a company from: China
- Launched: 2021
- Still made: Yes

[Read more by the manufacturer](https://www.zonestar3d.com/products/4-extruder-multi-color-large-size-fdm-3d-printer-diy-kit-z9v5pro)

## What filament can the Zonestar Z9V5 Pro print?

Filament compatibility for the Zonestar Z9V5 Pro: the materials Zonestar lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Zonestar Z9V5 Pro

Filaments the Zonestar Z9V5 Pro prints well, Zonestar's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-260 °C
- [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-260 °C

## Compare the Zonestar Z9V5 Pro with similar printers

- [Zonestar Z8PM4 Pro](https://simplyprint.io/compatibility/zonestar-z8pm4-pro): Expected to work, 300 x 300 x 400 mm, Also by Zonestar · Similar build volume
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume
- [Prusa XL](https://simplyprint.io/compatibility/prusa-xl): Compatible, 360 x 360 x 360 mm, Similar build volume
- [Sovol SV06 Plus](https://simplyprint.io/compatibility/sovol-sv06-plus): Compatible, 300 x 300 x 340 mm, Similar build volume
- [Compare the Zonestar Z9V5 Pro with other printers](https://simplyprint.io/compatibility/compare?compare=zonestar-z9v5-pro#choose)

## Where to buy the Zonestar Z9V5 Pro

- [Zonestar's global store](https://simplyprint.io/buy/8396) (Official store)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Zonestar Z9V5 Pro compatible with SimplyPrint?

Most likely. We expect the Zonestar Z9V5 Pro to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the Zonestar Z9V5 Pro to SimplyPrint?

Follow our step-by-step setup guide for the Zonestar Z9V5 Pro. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the Zonestar Z9V5 Pro?

Cura, PrusaSlicer and OrcaSlicer all work with the Zonestar Z9V5 Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Zonestar Z9V5 Pro?

Yes, but OrcaSlicer has no built-in profile for the Zonestar Z9V5 Pro that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Zonestar Z9V5 Pro print?

Zonestar lists PLA and PETG for the Z9V5 Pro.

### Does the Zonestar Z9V5 Pro work with OctoPrint or Klipper?

The Zonestar Z9V5 Pro works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Zonestar Z9V5 Pro's bed size and build volume?

The Zonestar Z9V5 Pro has a 300 x 300 mm print bed and prints up to 400 mm tall, a build volume of about 300 x 300 x 400 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Zonestar Z9V5 Pro come out?

Zonestar launched the Z9V5 Pro in 2021.

### Can the Zonestar Z9V5 Pro eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

### Where can I buy the Zonestar Z9V5 Pro?

From Zonestar's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.