# WonderMaker ZR: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By WonderMaker, China
- Launched April 2025
- Canonical page: https://simplyprint.io/compatibility/wondermaker-zr

## WonderMaker ZR at a glance

The WonderMaker ZR is a 300 x 300 x 300 mm open-frame printer with a single toolhead that prints in four colours, a 300 °C hardened-steel hotend and 300 mm/s speed. It is for hobbyists who want large-volume multi-colour printing at a simple, beginner-friendly level.

- Build volume: 300 x 300 x 300 mm
- Enclosure: Open frame
- Max print speed: 300 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: No
- Connectivity: Wi-Fi, USB

## Connect the WonderMaker ZR to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Klipper-based: the maker's slicer profiles inherit a Klipper base and its GitHub forks Klipper, Moonraker, Fluidd and Mainsail. Whether Moonraker is reachable on shipped units is not confirmed. ([Source](https://github.com/Wondermaker/Wonderprint-Orca/tree/main/resources/profiles/WonderMaker/machine)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Klipper-based; OctoPrint would only run on top of it. ([Source](https://github.com/Wondermaker/Wonderprint-Orca/tree/main/resources/profiles/WonderMaker/machine)) |

- [Help us confirm](https://simplyprint.io/compatibility/wondermaker-zr/confirm)

## What slicer to use for the WonderMaker ZR

None of the slicers in SimplyPrint's cloud can slice for the WonderMaker ZR that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the WonderMaker ZR · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the WonderMaker ZR · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the WonderMaker ZR · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the WonderMaker ZR · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the WonderMaker ZR · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the WonderMaker ZR · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the WonderMaker ZR · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the WonderMaker ZR.

## The app for the WonderMaker ZR

WonderMaker's own app is [WonderMaker App](https://wondermaker3d.com/software/app).


## WonderMaker ZR specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 300 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 300 mm

### Printing

- Enclosure: Open frame
- Max print speed: 300 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, USB
- Built-in camera: No
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: WonderMaker
- Printer model name: ZR
- Made by a company from: China
- Launched: April 2025
- Still made: Yes

[Read more by the manufacturer](https://wondermaker3d.com/printers/zr)

## What filament can the WonderMaker ZR print?

Filament compatibility for the WonderMaker ZR: the materials WonderMaker lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## When to choose the WonderMaker ZR

Choose the ZR when you want four-colour prints in a large 300 mm volume and plan to run it open or add the optional enclosure kit for ABS and ASA. The WonderMaker ZR Ultra uses four independent toolheads for less waste but a smaller 300 x 270 plate. We hold very little on this printer, and its connection to SimplyPrint is unconfirmed.

### Pros

- Four-colour printing from one toolhead with a built-in wiper and filament detection (WonderMaker).
- 300 x 300 x 300 mm build volume, 300 mm/s print speed and a 300 °C hardened-steel hotend (WonderMaker).
- Auto-leveling and one-touch calibration for an easier start (WonderMaker).
- Full-metal frame, built-in lighting and handrails for lifting it (WonderMaker).
- Optional enclosure kit with an air filter for ABS and ASA (WonderMaker).

### Cons

- We have not confirmed how it connects to SimplyPrint: Klipper is unknown and OctoPrint is unlikely.
- Open frame as sold; the enclosure is an extra, so ABS and ASA need it, and students can reach hot parts.
- No built-in camera, and Wi-Fi and USB are the only connections we list.
- It changes colour on one toolhead; WonderMaker positions the four toolheads of the ZR Ultra as the way to cut purge waste.
- No independent hands-on review found; the claims are WonderMaker's own.

### Who it suits

- Schools: Can work. Easy set-up and auto-leveling help, but the open frame and an unconfirmed SimplyPrint connection are drawbacks; the enclosure kit helps.
- Hobbyists: Good fit. Four-colour printing in a large volume at an entry-level level of complexity.
- Businesses: Can work. Fine for colourful models and prototypes; limited by the open frame and the lack of independent reviews.
- Print farms: Not a good fit. No camera, no confirmed SimplyPrint connection and a single toolhead make it a poor fleet unit.

## Printers like the WonderMaker ZR that work with SimplyPrint

- [LulzBot TAZ 8](https://simplyprint.io/compatibility/lulzbot-taz-8): Expected to work, 295 x 295 x 285 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [LulzBot TAZ Workhorse 2](https://simplyprint.io/compatibility/lulzbot-taz-workhorse-2): Expected to work, 280 x 280 x 285 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled

## Frequently asked questions

### Is the WonderMaker ZR compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a WonderMaker ZR, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the WonderMaker ZR?

None of the slicers in SimplyPrint's cloud can slice for the WonderMaker ZR that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the WonderMaker ZR print?

WonderMaker lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the ZR.

### What is the WonderMaker ZR's bed size and build volume?

The WonderMaker ZR has a 300 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 300 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.

### When did the WonderMaker ZR come out?

WonderMaker launched the ZR in April 2025.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.