# WonderMaker ZR Ultra: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By WonderMaker, China
- Launched April 2025
- Canonical page: https://simplyprint.io/compatibility/wondermaker-zr-ultra

## WonderMaker ZR Ultra at a glance

The WonderMaker ZR Ultra is a multi-head printer with four independently heated toolheads (each up to 300 °C), a 300 x 270 x 290 mm build volume and 600 mm/s speed. It is for makers and prosumers who want fast multi-colour or multi-material prints with little purge waste.

- Build volume: 300 x 270 x 290 mm
- Max print speed: 600 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: No
- Connectivity: Wi-Fi, USB

## Connect the WonderMaker ZR Ultra to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Klipper-based: the maker's slicer profiles inherit a Klipper base and its GitHub forks Klipper, Moonraker, Fluidd and Mainsail. Whether Moonraker is reachable on shipped units is not confirmed. ([Source](https://github.com/Wondermaker/Wonderprint-Orca/tree/main/resources/profiles/WonderMaker/machine)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Klipper-based; OctoPrint would only run on top of it. ([Source](https://github.com/Wondermaker/Wonderprint-Orca/tree/main/resources/profiles/WonderMaker/machine)) |

- [Help us confirm](https://simplyprint.io/compatibility/wondermaker-zr-ultra/confirm)

## What slicer to use for the WonderMaker ZR Ultra

None of the slicers in SimplyPrint's cloud can slice for the WonderMaker ZR Ultra that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the WonderMaker ZR Ultra · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the WonderMaker ZR Ultra · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the WonderMaker ZR Ultra · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the WonderMaker ZR Ultra · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the WonderMaker ZR Ultra · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the WonderMaker ZR Ultra · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the WonderMaker ZR Ultra · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the WonderMaker ZR Ultra.

## The app for the WonderMaker ZR Ultra

WonderMaker's own app is [WonderMaker App](https://wondermaker3d.com/software/app).


## WonderMaker ZR Ultra specifications: bed size, print height and more

### Size

- Build volume: 300 x 270 x 290 mm
- Bed type: Rectangle
- Bed size: 300 x 270 mm
- Max print height: 290 mm

### Printing

- Max print speed: 600 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 4
- Toolheads: 4
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: Yes
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, USB
- Built-in camera: No
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: WonderMaker
- Printer model name: ZR Ultra
- Made by a company from: China
- Launched: April 2025
- Still made: Yes

[Read more by the manufacturer](https://wondermaker3d.com/printers/zr-ultra)

## What filament can the WonderMaker ZR Ultra print?

Filament compatibility for the WonderMaker ZR Ultra: the materials WonderMaker lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## When to choose the WonderMaker ZR Ultra

Choose the ZR Ultra when you print in several colours or materials and want less filament waste and shorter colour changes than a single-toolhead printer. The WonderMaker ZR is the simpler single-toolhead option with a slightly larger plate. We hold little on it and no SimplyPrint connection method is confirmed, so it is a risky pick if SimplyPrint control is your reason to buy.

### Pros

- Four independent toolheads, each heated up to 300 °C, to mix colours, materials and nozzle sizes in one print (WonderMaker).
- 600 mm/s and 20,000 mm/s2 acceleration, with WonderMaker claiming a multi-colour print in 57 min 55 s against 1 h 34 min on another printer (WonderMaker's own test).
- Less purging on colour changes than a single-toolhead printer, which reduces waste (WonderMaker).
- Auto bed leveling, filament runout detection and power-loss recovery (WonderMaker).
- 5-inch touchscreen, built-in lighting and remote monitoring with an optional camera (WonderMaker).

### Cons

- We have not confirmed how it connects to SimplyPrint: Klipper is unknown and OctoPrint is unlikely.
- The maker's page does not say whether it is enclosed, and our facts hold no enclosure value; we cannot say it suits ABS or classroom use.
- A camera is an optional extra, not built in (WonderMaker).
- No independent hands-on review found; the speed and waste claims are WonderMaker's own.

### Who it suits

- Schools: Can work. Multi-colour printing is engaging for students, but enclosure is unknown and the SimplyPrint connection is unconfirmed.
- Hobbyists: Good fit. A fast multi-colour printer with independent toolheads, if you accept that it is new and unreviewed.
- Businesses: Can work. Useful for multi-material prototypes; the lack of independent reviews and unknown enclosure hold it back.
- Print farms: Not a good fit. Optional camera, unconfirmed SimplyPrint connection and a complex toolhead system make it a weak fleet unit.

## Printers like the WonderMaker ZR Ultra that work with SimplyPrint

- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Anycubic Kobra S1](https://simplyprint.io/compatibility/anycubic-kobra-s1): Compatible, 250 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the WonderMaker ZR Ultra compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a WonderMaker ZR Ultra, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the WonderMaker ZR Ultra?

None of the slicers in SimplyPrint's cloud can slice for the WonderMaker ZR Ultra that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the WonderMaker ZR Ultra print?

WonderMaker lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the ZR Ultra.

### What is the WonderMaker ZR Ultra's bed size and build volume?

The WonderMaker ZR Ultra has a 300 x 270 mm print bed and prints up to 290 mm tall, a build volume of about 300 x 270 x 290 mm. See the full specifications table above for bed type, temperatures and more.

### When did the WonderMaker ZR Ultra come out?

WonderMaker launched the ZR Ultra in April 2025.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.