# WEEDO Tina2S: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By WEEDO, China
- Launched May 2023
- Canonical page: https://simplyprint.io/compatibility/weedo-tina2s

## WEEDO Tina2S at a glance

The WEEDO Tina2S is a 3D printer by WEEDO with a 100 x 105 x 100 mm build volume.

- Build volume: 100 x 105 x 100 mm
- Max print speed: 80 mm/s
- Prints well: PLA, PETG, TPU & flexibles
- Connectivity: Wi-Fi, USB, SD card

## Connect the WEEDO Tina2S to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Compatible |  | Through OctoPrint |
| OctoPrint (Directly, over USB) | Compatible | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | WEEDO's Tina2S manual lists OctoPrint among supported software and prints over a USB cable (CH340); its wiki documents OctoPrint setup for the Tina2 series (1,000,000 baud). ([Source](https://wiki.poloprint.net/_media/tina2:pasted:tina2s_manual_en.pdf)) |
| Klipper (Moonraker) | Not compatible |  | Doesn't ship Klipper. ([Source](https://wiki.poloprint.net/_media/tina2:pasted:tina2s_manual_en.pdf)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on WEEDO Tina2S](https://simplyprint.io/setup-guide/weedo/tina2s.md)
- [How to set up OctoPrint on WEEDO Tina2S](https://simplyprint.io/compatibility/weedo-tina2s/octoprint-setup)

### What works with SimplyPrint

Connected through OctoPrint, SimplyPrint supports everything the WEEDO Tina2S lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

## What slicer to use for the WEEDO Tina2S

None of the slicers in SimplyPrint's cloud has a ready-made profile for the WEEDO Tina2S, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the WEEDO Tina2S · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the WEEDO Tina2S · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the WEEDO Tina2S · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the WEEDO Tina2S · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the WEEDO Tina2S · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the WEEDO Tina2S · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the WEEDO Tina2S · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the WEEDO Tina2S.

## The app for the WEEDO Tina2S

SimplyPrint works as the WEEDO Tina2S's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the WEEDO Tina2S to SimplyPrint, free](https://simplyprint.io/setup-guide/weedo/tina2s) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the WEEDO Tina2S

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## WEEDO Tina2S specifications: bed size, print height and more

### Size

- Build volume: 100 x 105 x 100 mm
- Bed type: Rectangle
- Bed size: 100 x 105 mm
- Max print height: 100 mm

### Printing

- Max print speed: 80 mm/s
- Max extruder temperature: 245 °C
- Has heated bed: Yes
- Max bed temperature: 60 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, USB, SD card
- Prints from: microSD card
- Supports serial printing: Yes
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: WEEDO
- Printer model name: Tina2S
- Made by a company from: China
- Launched: May 2023
- Still made: Yes

[Read more by the manufacturer](https://www.weedo3d.com/products/weedo-tina2s-3d-printers-for-kids-and-beginners)

## What filament can the WEEDO Tina2S print?

Filament compatibility for the WEEDO Tina2S: the materials WEEDO lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Good | Printable - aim for a bed around 70-80C for the best adhesion. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the WEEDO Tina2S

Filaments the WEEDO Tina2S prints well, WEEDO's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-260 °C
- [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-260 °C

## Compare the WEEDO Tina2S with similar printers

- [WEEDO Tina2](https://simplyprint.io/compatibility/weedo-tina2): Compatible, 100 x 100 x 100 mm, Also by WEEDO · Similar build volume
- [Monoprice Delta Mini V2](https://simplyprint.io/compatibility/monoprice-delta-mini-v2): Compatible, 110 x 110 x 120 mm, Similar build volume
- [Geeetech M1 Mini](https://simplyprint.io/compatibility/geeetech-m1-mini): Compatible, 100 x 110 x 100 mm, Similar build volume
- [Geeetech M1S](https://simplyprint.io/compatibility/geeetech-m1s): Expected to work, 100 x 110 x 100 mm, Similar build volume
- [Compare the WEEDO Tina2S with other printers](https://simplyprint.io/compatibility/compare?compare=weedo-tina2s#choose)

## Where to buy the WEEDO Tina2S

- [WEEDO's global store](https://simplyprint.io/buy/8394) (Official store)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the WEEDO Tina2S compatible with SimplyPrint?

Yes. You can connect the WEEDO Tina2S to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the WEEDO Tina2S to SimplyPrint?

Follow our step-by-step setup guide for the WEEDO Tina2S. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the WEEDO Tina2S?

Cura, PrusaSlicer and OrcaSlicer all work with the WEEDO Tina2S, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the WEEDO Tina2S?

Yes, but OrcaSlicer has no built-in profile for the WEEDO Tina2S that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the WEEDO Tina2S print?

WEEDO lists PLA and TPU & flexibles for the Tina2S.

### Does the WEEDO Tina2S work with OctoPrint or Klipper?

The WEEDO Tina2S works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the WEEDO Tina2S's bed size and build volume?

The WEEDO Tina2S has a 100 x 105 mm print bed and prints up to 100 mm tall, a build volume of about 100 x 105 x 100 mm. See the full specifications table above for bed type, temperatures and more.

### When did the WEEDO Tina2S come out?

WEEDO launched the Tina2S in May 2023.

### Can the WEEDO Tina2S eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

### Where can I buy the WEEDO Tina2S?

From WEEDO's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.