# Wanhao D12-300: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Wanhao, China
- Launched 2020
- Canonical page: https://simplyprint.io/compatibility/wanhao-d12-300

## Wanhao D12-300 at a glance

The Wanhao D12-300 is a 3D printer by Wanhao with a 300 x 300 x 400 mm build volume.

- Build volume: 300 x 300 x 400 mm
- Enclosure: Partly enclosed
- Max print speed: 150 mm/s
- Prints well: PLA, PETG, ABS & ASA, Polycarbonate (PC)
- Connectivity: Wi-Fi, USB, SD card

## Connect the Wanhao D12-300 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | The only spec table found lists SD and Wi-Fi, no USB cable connection; serial printing unconfirmed. ([Source](https://top3dshop.com/blog/wanhao-d12-230-and-d12-300-new-3d-printers-review)) |
| Klipper (Moonraker) | Not compatible |  | Doesn't ship Klipper. ([Source](https://top3dshop.com/blog/wanhao-d12-230-and-d12-300-new-3d-printers-review)) |

- [Help us confirm](https://simplyprint.io/compatibility/wanhao-d12-300/confirm)

## What slicer to use for the Wanhao D12-300

None of the slicers in SimplyPrint's cloud can slice for the Wanhao D12-300 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Wanhao D12-300 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Wanhao D12-300 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Wanhao D12-300 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Wanhao D12-300 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Wanhao D12-300 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Wanhao D12-300 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Wanhao D12-300 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Wanhao D12-300.

## Wanhao D12-300 specifications: bed size, print height and more

### Size

- Build volume: 300 x 300 x 400 mm
- Bed type: Square
- Bed size: 300 x 300 mm
- Max print height: 400 mm

### Printing

- Enclosure: Partly enclosed
- Max print speed: 150 mm/s
- Max extruder temperature: 260 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Connecting

- Connectivity: Wi-Fi, USB, SD card
- Prints from: microSD card, USB stick
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Wanhao
- Printer model name: D12-300
- Made by a company from: China
- Launched: 2020

[Read more by the manufacturer](https://web.archive.org/web/20211208160214/https://wanhao3dprinter.com/Unboxin/ShowArticle.asp?ArticleID=175)

## What filament can the Wanhao D12-300 print?

Filament compatibility for the Wanhao D12-300: the materials Wanhao lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Wanhao D12-300 that work with SimplyPrint

- [Voron Voron Trident](https://simplyprint.io/compatibility/voron-voron-trident): Compatible, 350 x 350 x 250 mm, Similar build volume · Also prints ABS & ASA, Polycarbonate (PC)
- [Vivedino Troodon 2.0](https://simplyprint.io/compatibility/vivedino-troodon-2-0): Compatible, 350 x 350 x 320 mm, Similar build volume · Also prints ABS & ASA, Polycarbonate (PC)
- [QIDI i-fast](https://simplyprint.io/compatibility/qidi-i-fast): Compatible, 330 x 250 x 320 mm, Similar build volume · Also prints ABS & ASA, Polycarbonate (PC)
- [Goofoo Nova](https://simplyprint.io/compatibility/goofoo-nova): Compatible, 280 x 280 x 300 mm, Similar build volume · Also prints ABS & ASA, Polycarbonate (PC)

## Frequently asked questions

### Is the Wanhao D12-300 compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Wanhao D12-300, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Wanhao D12-300?

None of the slicers in SimplyPrint's cloud can slice for the Wanhao D12-300 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Wanhao D12-300 print?

Wanhao lists PLA, PETG, ABS & ASA and Polycarbonate (PC) for the D12-300.

### What is the Wanhao D12-300's bed size and build volume?

The Wanhao D12-300 has a 300 x 300 mm print bed and prints up to 400 mm tall, a build volume of about 300 x 300 x 400 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Wanhao D12-300 come out?

Wanhao launched the D12-300 in 2020.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.