# VzBoT Vz330: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By VzBoT
- Launched 2021
- Canonical page: https://simplyprint.io/compatibility/vzbot-vz330

## VzBoT Vz330 at a glance

The VzBoT Vz330 is a 3D printer by VzBoT with a 330 x 330 x 400 mm build volume.

- Build volume: 330 x 330 x 400 mm
- Motion system: CoreXY
- Prints well: PLA, PETG

## Connect the VzBoT Vz330 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Compatible |  | Through Klipper (Moonraker) |
| Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships | Open-source kit whose official firmware is a Klipper config (Mellow Fly Super8 plus a Raspberry Pi, Klipper's Linux MCU), with a Mainsail theme in the project; the builder installs it. ([Source](https://github.com/VzBoT3D/VzBoT-Vz330/blob/main/Firmware/README.md)) |
| OctoPrint (Directly, over USB) | Not compatible |  | Runs Klipper; OctoPrint only on top of it. ([Source](https://github.com/VzBoT3D/VzBoT-Vz330/blob/main/Firmware/330AWD-printer.cfg)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [How to set up SimplyPrint on VzBoT Vz330](https://simplyprint.io/setup-guide/vzbot/vz330.md)
- [How to set up Mainsail on VzBoT Vz330](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on VzBoT Vz330](https://docs.fluidd.xyz/installation)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the VzBoT Vz330: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

## What slicer to use for the VzBoT Vz330

None of the slicers in SimplyPrint's cloud has a ready-made profile for the VzBoT Vz330, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the VzBoT Vz330 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the VzBoT Vz330 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the VzBoT Vz330 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the VzBoT Vz330 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the VzBoT Vz330 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the VzBoT Vz330 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the VzBoT Vz330 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the VzBoT Vz330.

## The app for the VzBoT Vz330

VzBoT doesn't make an app for the VzBoT Vz330. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the VzBoT Vz330 to SimplyPrint, free](https://simplyprint.io/setup-guide/vzbot/vz330) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the VzBoT Vz330

**CoreXY printers push their prints off.** The VzBoT Vz330's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.

### Ways to automate it

- [Push prints off with the toolhead](https://simplyprint.io/features/autoprint/push-off): On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## VzBoT Vz330 specifications: bed size, print height and more

### Size

- Build volume: 330 x 330 x 400 mm
- Bed type: Square
- Bed size: 330 x 330 mm
- Max print height: 400 mm

### Printing

- Motion system: CoreXY
- Max extruder temperature: 400 °C
- Has heated bed: Yes
- Max bed temperature: 130 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: VzBoT
- Printer model name: Vz330
- Launched: 2021
- Still made: Yes

[Read more by the manufacturer](https://github.com/VzBoT3D/VzBoT-Vz330)

## What filament can the VzBoT Vz330 print?

Filament compatibility for the VzBoT Vz330: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the VzBoT Vz330

Filaments the VzBoT Vz330 prints well, VzBoT's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-260 °C
- [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-260 °C

## Compare the VzBoT Vz330 with similar printers

- [Prusa XL](https://simplyprint.io/compatibility/prusa-xl): Compatible, 360 x 360 x 360 mm, Similar build volume
- [Sovol SV06 Plus](https://simplyprint.io/compatibility/sovol-sv06-plus): Compatible, 300 x 300 x 340 mm, Similar build volume
- [Creality Ender-3 Max Neo](https://simplyprint.io/compatibility/creality-ender-3-max-neo): Compatible, 300 x 300 x 320 mm, Similar build volume
- [Voron Voron Trident](https://simplyprint.io/compatibility/voron-voron-trident): Compatible, 350 x 350 x 250 mm, Similar build volume
- [Compare the VzBoT Vz330 with other printers](https://simplyprint.io/compatibility/compare?compare=vzbot-vz330#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the VzBoT Vz330 compatible with SimplyPrint?

Yes. You can connect the VzBoT Vz330 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the VzBoT Vz330 to SimplyPrint?

Follow our step-by-step setup guide for the VzBoT Vz330. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the VzBoT Vz330?

Cura, PrusaSlicer and OrcaSlicer all work with the VzBoT Vz330, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the VzBoT Vz330?

Yes, but OrcaSlicer has no built-in profile for the VzBoT Vz330 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the VzBoT Vz330 print?

Based on its specs (hotend up to 400C, heated bed up to 130C), the VzBoT Vz330 handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

### Does the VzBoT Vz330 work with OctoPrint or Klipper?

The VzBoT Vz330 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the VzBoT Vz330's bed size and build volume?

The VzBoT Vz330 has a 330 x 330 mm print bed and prints up to 400 mm tall, a build volume of about 330 x 330 x 400 mm. See the full specifications table above for bed type, temperatures and more.

### When did the VzBoT Vz330 come out?

VzBoT launched the Vz330 in 2021.

### Can the VzBoT Vz330 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.