# Tronxy VEHO 800 Pro 2E: specs, SimplyPrint compatibility and setup > **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints. - By Tronxy, China - Launched April 2026 - Canonical page: https://simplyprint.io/compatibility/tronxy-veho-800-pro-2e ## Tronxy VEHO 800 Pro 2E at a glance The VEHO 800 Pro 2E is the dual-extruder version of Tronxy's open-frame 800 x 800 x 800 mm Klipper printer. It is for makers who want very large two-colour prints. - Build volume: 800 x 800 x 800 mm - Enclosure: Open frame - Max print speed: 300 mm/s - Motion system: Other kinematics - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA - Connectivity: Wi-Fi, Ethernet, USB ## Connect the Tronxy VEHO 800 Pro 2E to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Compatible | | Through Klipper (Moonraker) | | Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships | Ships Klipper with KlipperScreen on the touchscreen (manual), which runs on Moonraker; a browser UI is not shown in the manual. ([Source](https://drive.google.com/file/d/1CDVCt4bMyMaoOvwfu-b4f1vC1NATmlYY/view)) | | OctoPrint (Directly, over USB) | Not compatible | | Ships Klipper; OctoPrint only on top of it. ([Source](https://drive.google.com/file/d/1CDVCt4bMyMaoOvwfu-b4f1vC1NATmlYY/view)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin | - [How to set up SimplyPrint on Tronxy VEHO 800 Pro 2E](https://simplyprint.io/setup-guide/tronxy/veho-800-pro-2e.md) - [How to set up Mainsail on Tronxy VEHO 800 Pro 2E](https://docs.mainsail.xyz/setup) - [How to set up Fluidd on Tronxy VEHO 800 Pro 2E](https://docs.fluidd.xyz/installation) ### What works with SimplyPrint Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Tronxy VEHO 800 Pro 2E: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. ## What slicer to use for the Tronxy VEHO 800 Pro 2E None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tronxy VEHO 800 Pro 2E, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Tronxy VEHO 800 Pro 2E · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Tronxy VEHO 800 Pro 2E · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Tronxy VEHO 800 Pro 2E · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Tronxy VEHO 800 Pro 2E · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Tronxy VEHO 800 Pro 2E · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Tronxy VEHO 800 Pro 2E · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Tronxy VEHO 800 Pro 2E · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tronxy VEHO 800 Pro 2E. ## The app for the Tronxy VEHO 800 Pro 2E Tronxy doesn't make an app for the Tronxy VEHO 800 Pro 2E. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Tronxy VEHO 800 Pro 2E to SimplyPrint, free](https://simplyprint.io/setup-guide/tronxy/veho-800-pro-2e) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) ## Automate the Tronxy VEHO 800 Pro 2E ### Ways to automate it - [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Tronxy VEHO 800 Pro 2E specifications: bed size, print height and more ### Size - Build volume: 800 x 800 x 800 mm - Bed type: Square - Bed size: 800 x 800 mm - Max print height: 800 mm ### Printing - Enclosure: Open frame - Motion system: Other kinematics - Max print speed: 300 mm/s - Max extruder temperature: 320 °C - Has heated bed: Yes - Max bed temperature: 110 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Connectivity: Wi-Fi, Ethernet, USB - Prints from: USB stick - Supports serial printing: No - Shipped firmware: Klipper ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Tronxy - Printer model name: VEHO 800 Pro 2E - Made by a company from: China - Launched: April 2026 - Still made: Yes [Read more by the manufacturer](https://www.tronxy3d.com/products/tronxy-veho-800-pro-2e-multicolor-high-speed-printing-with-klipper-large-3d-printer-800-800-800mm) ## What filament can the Tronxy VEHO 800 Pro 2E print? Filament compatibility for the Tronxy VEHO 800 Pro 2E: the materials Tronxy lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. | | Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Tronxy VEHO 800 Pro 2E Filaments the Tronxy VEHO 800 Pro 2E prints well, Tronxy's own first, then the best known. - [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C - [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C - [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C - [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C - [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C - [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C - [Bambu Lab ASA](https://simplyprint.io/filaments/bambu-lab/asa): ASA, 240-270 °C ## When to choose the Tronxy VEHO 800 Pro 2E Choose the 800 Pro 2E when you want two colours or two materials on one very large part and are happy with an open frame. If you only print one colour the VEHO 800 Pro costs less, and for a closed chamber the VEHO 800A is the choice; for smaller multi-colour work a printer with an automatic filament system is easier to live with. ### Pros - Two independently driven extruders for dual-colour printing on an 800 x 800 x 800 mm plate (Tronxy). - Klipper with 100-point auto-leveling and power-off resume (Tronxy). - Works with SimplyPrint through Klipper, with Wi-Fi and Ethernet to connect it. - Seven linear guides, four independent Z motors and filament runout detection (Tronxy). - 320 °C hotend and a silicone heated bed (Tronxy and our facts). ### Cons - Open frame, so ABS and other warp-prone materials are hard on a plate this size. - Limited to two colours or materials at a time (Tronxy). - The maker's page lists no built-in camera. Add a camera for remote watching. - Tronxy's page quotes a high-speed print of 80 mm/s, much lower than the 600 mm/s of the single-extruder model, and we found no independent review. ### Who it suits - Schools: Not a good fit. Open, very large and hot; two extruders add complexity that a classroom does not need. - Hobbyists: Good fit. Dual-colour printing at a scale few printers reach, if you are fine with an open frame. - Businesses: Can work. Useful for large two-colour display pieces; no chamber and no independent reliability data. - Print farms: Not a good fit. A very large dual-extruder machine with no camera is a poor fleet unit. ## Compare the Tronxy VEHO 800 Pro 2E with similar printers - [Tronxy VEHO 800 Pro](https://simplyprint.io/compatibility/tronxy-veho-800-pro): Compatible, 800 x 800 x 800 mm, Also by Tronxy · Similar build volume · Also prints ABS & ASA - [Tronxy VEHO 800-12](https://simplyprint.io/compatibility/tronxy-veho-800-12): Expected to work, 800 x 800 x 1200 mm, Also by Tronxy · Similar build volume · Also prints ABS & ASA - [Meltingplot MBL 480](https://simplyprint.io/compatibility/meltingplot-mbl-480): Compatible, 850 x 405 x 1396 mm, Similar build volume · Also prints ABS & ASA - [MINGDA Raptor 800](https://simplyprint.io/compatibility/mingda-raptor-800): Expected to work, 800 x 800 x 800 mm, Similar build volume · Also prints ABS & ASA - [Compare the Tronxy VEHO 800 Pro 2E with other printers](https://simplyprint.io/compatibility/compare?compare=tronxy-veho-800-pro-2e#choose) ## Where to buy the Tronxy VEHO 800 Pro 2E - [Tronxy's global store](https://simplyprint.io/buy/8380) (Official store) ## About Tronxy Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money. - Headquarters: Shenzhen, China - Website: https://www.tronxy.com Openness: Open (4.3 of 5) Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request. - Firmware and custom firmware (4 of 5): Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA. - Local control and integrations (5 of 5): We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB. - Third-party filament, slicers and parts (4 of 5): Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts. - Repairs and spare parts (4 of 5): Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts. - Community and documentation (3 of 5): Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly. ### Pros - Very large build volumes for the price, up to 1,000 mm and more in the VEHO line. - Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper. - No cloud or account: print over USB, memory card, Wi-Fi or Ethernet. - Spare mainboards, hotends and nozzles sold for current and older models. ### Cons - Firmware on Tronxy's website is by email request rather than a direct download. - Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit. - VEHO hotends and print heads are Tronxy-specific parts. ### Track record - October 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024. - December 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021. How Tronxy compares with every other brand: https://simplyprint.io/articles/best-3d-printer Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Tronxy VEHO 800 Pro 2E compatible with SimplyPrint? Yes. You can connect the Tronxy VEHO 800 Pro 2E to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app. ### How do I connect the Tronxy VEHO 800 Pro 2E to SimplyPrint? Follow our step-by-step setup guide for the Tronxy VEHO 800 Pro 2E. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick. ### What slicer should I use for the Tronxy VEHO 800 Pro 2E? Cura, PrusaSlicer and OrcaSlicer all work with the Tronxy VEHO 800 Pro 2E, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Tronxy VEHO 800 Pro 2E? Yes, but OrcaSlicer has no built-in profile for the Tronxy VEHO 800 Pro 2E that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Tronxy VEHO 800 Pro 2E print? Tronxy lists PLA, ABS & ASA, PETG and TPU & flexibles for the VEHO 800 Pro 2E. ### Does the Tronxy VEHO 800 Pro 2E work with OctoPrint or Klipper? The Tronxy VEHO 800 Pro 2E works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Tronxy VEHO 800 Pro 2E's bed size and build volume? The Tronxy VEHO 800 Pro 2E has a 800 x 800 mm print bed and prints up to 800 mm tall, a build volume of about 800 x 800 x 800 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Tronxy VEHO 800 Pro 2E come out? Tronxy launched the VEHO 800 Pro 2E in April 2026. ### Can the Tronxy VEHO 800 Pro 2E eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. ### Where can I buy the Tronxy VEHO 800 Pro 2E? From Tronxy's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.