# Tronxy VEHO 2010-10A: specs, SimplyPrint compatibility and setup > **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints. - By Tronxy, China - Launched May 2025 - Canonical page: https://simplyprint.io/compatibility/tronxy-veho-2010-10a ## Tronxy VEHO 2010-10A at a glance The VEHO 2010-10A is a fully enclosed Tronxy printer with a 2000 x 1000 x 1000 mm build volume and Klipper firmware. It is for workshops that print very long parts, such as furniture, boat or sign components, in a closed chamber. - Build volume: 2000 x 1000 x 1000 mm - Enclosure: Fully enclosed - Max print speed: 200 mm/s - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled - Connectivity: Wi-Fi, Ethernet, USB ## Connect the Tronxy VEHO 2010-10A to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Compatible | | Through Klipper (Moonraker) | | Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships | Ships Klipper with KlipperScreen on the touchscreen (manual), which runs on Moonraker; a browser UI is not shown in the manual. ([Source](https://drive.google.com/file/d/1SH5KeXQVsuSIWUW2UHXYn5bSxI2WjT_r/view)) | | OctoPrint (Directly, over USB) | Not compatible | | Ships Klipper; OctoPrint only on top of it. ([Source](https://drive.google.com/file/d/1SH5KeXQVsuSIWUW2UHXYn5bSxI2WjT_r/view)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin | - [How to set up SimplyPrint on Tronxy VEHO 2010-10A](https://simplyprint.io/setup-guide/tronxy/veho-2010-10a.md) - [How to set up Mainsail on Tronxy VEHO 2010-10A](https://docs.mainsail.xyz/setup) - [How to set up Fluidd on Tronxy VEHO 2010-10A](https://docs.fluidd.xyz/installation) ### What works with SimplyPrint Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Tronxy VEHO 2010-10A: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. ## What slicer to use for the Tronxy VEHO 2010-10A None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tronxy VEHO 2010-10A, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Tronxy VEHO 2010-10A · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Tronxy VEHO 2010-10A · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Tronxy VEHO 2010-10A · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Tronxy VEHO 2010-10A · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Tronxy VEHO 2010-10A · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Tronxy VEHO 2010-10A · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Tronxy VEHO 2010-10A · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tronxy VEHO 2010-10A. ## The app for the Tronxy VEHO 2010-10A Tronxy doesn't make an app for the Tronxy VEHO 2010-10A. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Tronxy VEHO 2010-10A to SimplyPrint, free](https://simplyprint.io/setup-guide/tronxy/veho-2010-10a) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) ## Automate the Tronxy VEHO 2010-10A ### Ways to automate it - [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Tronxy VEHO 2010-10A specifications: bed size, print height and more ### Size - Build volume: 2000 x 1000 x 1000 mm - Bed type: Square - Bed size: 2000 x 1000 mm - Max print height: 1000 mm ### Printing - Enclosure: Fully enclosed - Max print speed: 200 mm/s - Max extruder temperature: 320 °C - Has heated bed: Yes - Max bed temperature: 110 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Connectivity: Wi-Fi, Ethernet, USB - Supports serial printing: No - Shipped firmware: Klipper ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Tronxy - Printer model name: VEHO 2010-10A - Made by a company from: China - Launched: May 2025 - Still made: Yes [Read more by the manufacturer](https://www.tronxy3d.com/products/tronxy-veho-2010-10a-fully-enclosed-3d-printer-2000-1000-1000mm-huge-print-size-with-high-speed-klipper) ## What filament can the Tronxy VEHO 2010-10A print? Filament compatibility for the Tronxy VEHO 2010-10A: the materials Tronxy lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | Great | On the maker's list of materials for this printer. | | Polycarbonate (PC) | Great | On the maker's list of materials for this printer. | | Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. | ### Best filament for the Tronxy VEHO 2010-10A Filaments the Tronxy VEHO 2010-10A prints well, Tronxy's own first, then the best known. - [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C - [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [ELEGOO PLA](https://simplyprint.io/filaments/elegoo/pla): PLA, 190-220 °C - [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C - [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C - [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C - [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C - [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C ## When to choose the Tronxy VEHO 2010-10A Choose the VEHO 2010-10A when a part is up to two metres long and you want it enclosed for ABS, ASA, PC or nylon. Tronxy's own page asks buyers to contact its sales team before purchasing, so expect a conversation about shipping and setup. For one-metre-cube work the VEHO 1000A is smaller and costs less; the open VEHO 2010-10 drops the enclosure. ### Pros - 2000 x 1000 x 1000 mm build volume in a fully enclosed machine (Tronxy). - Klipper firmware at up to 500 mm/s, so it works with SimplyPrint through Klipper. - 72-point auto-levelling, four independent Z motors and seven linear guide rails (Tronxy). - Heated bed up to 110 °C and ceramic nozzle heating up to 320 °C, with filament run-out detection and power-off resume (Tronxy). - A wide material list including PC, nylon and composites in our facts. ### Cons - The largest footprint in this range: it needs a dedicated room and careful delivery. - Tronxy asks buyers to enquire with sales before purchasing, so it is not a simple order-and-ship product. - No camera in our facts, which matters in a machine this big. - Express and air shipments are priced without import duties and taxes, which the buyer pays at customs; Tronxy lists sea shipments as tax-free, door to door. - No independent hands-on review found. ### Who it suits - Schools: Not a good fit. Far too large and costly for a classroom. - Hobbyists: Not a good fit. Very few hobbyists have the space or need for two metres of print. - Businesses: Can work. Large enclosed parts for specialist work are possible, but it needs sales contact and has no independent track record. - Print farms: Not a good fit. One giant machine and no camera or plate-swap kit in our facts. ## Compare the Tronxy VEHO 2010-10A with similar printers - [Tronxy VEHO 1000-16A](https://simplyprint.io/compatibility/tronxy-veho-1000-16a): Expected to work, 1000 x 1000 x 1600 mm, Also by Tronxy · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Tronxy VEHO 1000-20A](https://simplyprint.io/compatibility/tronxy-veho-1000-20a): Expected to work, 1000 x 1000 x 2000 mm, Also by Tronxy · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [MINGDA Raptor 1200](https://simplyprint.io/compatibility/mingda-raptor-1200): Expected to work, 1200 x 1200 x 1200 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled - [Modix Everest](https://simplyprint.io/compatibility/modix-everest): Compatible, 970 x 1030 x 2000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled - [Compare the Tronxy VEHO 2010-10A with other printers](https://simplyprint.io/compatibility/compare?compare=tronxy-veho-2010-10a#choose) ## Where to buy the Tronxy VEHO 2010-10A - [Tronxy's global store](https://simplyprint.io/buy/8368) (Official store) ## About Tronxy Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money. - Headquarters: Shenzhen, China - Website: https://www.tronxy.com Openness: Open (4.3 of 5) Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request. - Firmware and custom firmware (4 of 5): Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA. - Local control and integrations (5 of 5): We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB. - Third-party filament, slicers and parts (4 of 5): Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts. - Repairs and spare parts (4 of 5): Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts. - Community and documentation (3 of 5): Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly. ### Pros - Very large build volumes for the price, up to 1,000 mm and more in the VEHO line. - Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper. - No cloud or account: print over USB, memory card, Wi-Fi or Ethernet. - Spare mainboards, hotends and nozzles sold for current and older models. ### Cons - Firmware on Tronxy's website is by email request rather than a direct download. - Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit. - VEHO hotends and print heads are Tronxy-specific parts. ### Track record - October 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024. - December 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021. How Tronxy compares with every other brand: https://simplyprint.io/articles/best-3d-printer Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Tronxy VEHO 2010-10A compatible with SimplyPrint? Yes. You can connect the Tronxy VEHO 2010-10A to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app. ### How do I connect the Tronxy VEHO 2010-10A to SimplyPrint? Follow our step-by-step setup guide for the Tronxy VEHO 2010-10A. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick. ### What slicer should I use for the Tronxy VEHO 2010-10A? Cura, PrusaSlicer and OrcaSlicer all work with the Tronxy VEHO 2010-10A, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Tronxy VEHO 2010-10A? Yes, but OrcaSlicer has no built-in profile for the Tronxy VEHO 2010-10A that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Tronxy VEHO 2010-10A print? Tronxy lists PLA, ABS & ASA, Polycarbonate (PC), Carbon-fiber & glass-filled, Nylon (PA), PETG and TPU & flexibles for the VEHO 2010-10A. ### Does the Tronxy VEHO 2010-10A work with OctoPrint or Klipper? The Tronxy VEHO 2010-10A works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Tronxy VEHO 2010-10A's bed size and build volume? The Tronxy VEHO 2010-10A has a 2000 x 1000 mm print bed and prints up to 1000 mm tall, a build volume of about 2000 x 1000 x 1000 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Tronxy VEHO 2010-10A come out? Tronxy launched the VEHO 2010-10A in May 2025. ### Can the Tronxy VEHO 2010-10A eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. ### Where can I buy the Tronxy VEHO 2010-10A? From Tronxy's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.