# Tronxy VEHO 1000-16A: specs, SimplyPrint compatibility and setup > **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the Tronxy VEHO 1000A. - By Tronxy, China - Launched March 2026 - Canonical page: https://simplyprint.io/compatibility/tronxy-veho-1000-16a ## Tronxy VEHO 1000-16A at a glance The VEHO 1000-16A is a fully enclosed Tronxy printer with a 1000 x 1000 x 1600 mm build volume and Klipper at up to 500 mm/s. It is for workshops and makers who need to print parts that close to a metre or more in every direction. - Build volume: 1000 x 1000 x 1600 mm - Enclosure: Fully enclosed - Max print speed: 500 mm/s - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) ## Connect the Tronxy VEHO 1000-16A to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Expected to work | | Through Klipper (Moonraker) | | Klipper (Moonraker) | Expected to work | Nothing extra: the printer runs Klipper as it ships | Same Klipper system, 7" capacitive screen and enclosure as the VEHO 1000A, whose manual shows KlipperScreen and Mainsail. No manual of its own yet. ([Source](https://www.tronxy3d.com/products/tronxy-veho-1000-16a-fully-enclosed-high-speed-3d-printer-1000-1000-1600mm-large-format-direct-drive-extrusion)); Expected to work like the Tronxy VEHO 1000A | | OctoPrint (Directly, over USB) | Not compatible | | Ships Klipper; OctoPrint only on top of it. ([Source](https://www.tronxy3d.com/products/tronxy-veho-1000-16a-fully-enclosed-high-speed-3d-printer-1000-1000-1600mm-large-format-direct-drive-extrusion)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin | - [How to set up SimplyPrint on Tronxy VEHO 1000-16A](https://simplyprint.io/setup-guide/tronxy/veho-1000-16a.md) - [How to set up Mainsail on Tronxy VEHO 1000-16A](https://docs.mainsail.xyz/setup) - [How to set up Fluidd on Tronxy VEHO 1000-16A](https://docs.fluidd.xyz/installation) - [Help us confirm](https://simplyprint.io/compatibility/tronxy-veho-1000-16a/confirm) ### What works with SimplyPrint Connected through Klipper (Moonraker), SimplyPrint is expected to support most of what it offers on the Tronxy VEHO 1000-16A: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts. ## What slicer to use for the Tronxy VEHO 1000-16A None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tronxy VEHO 1000-16A, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Tronxy VEHO 1000-16A · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Tronxy VEHO 1000-16A · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Tronxy VEHO 1000-16A · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Tronxy VEHO 1000-16A · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Tronxy VEHO 1000-16A · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Tronxy VEHO 1000-16A · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Tronxy VEHO 1000-16A · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tronxy VEHO 1000-16A. ## The app for the Tronxy VEHO 1000-16A Tronxy doesn't make an app for the Tronxy VEHO 1000-16A. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud. - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Printers from many brands in one place, side by side. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Tronxy VEHO 1000-16A to SimplyPrint, free](https://simplyprint.io/setup-guide/tronxy/veho-1000-16a) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) ## Automate the Tronxy VEHO 1000-16A ### Ways to automate it - [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Tronxy VEHO 1000-16A specifications: bed size, print height and more ### Size - Build volume: 1000 x 1000 x 1600 mm - Bed type: Square - Bed size: 1000 x 1000 mm - Max print height: 1600 mm ### Printing - Enclosure: Fully enclosed - Max print speed: 500 mm/s - Max extruder temperature: 320 °C - Has heated bed: Yes - Max bed temperature: 100 °C - Number of nozzles: 1 - Toolheads: 1 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: No - IDEX (independent dual extruders): No ### Connecting - Supports serial printing: No - Shipped firmware: Klipper ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Tronxy - Printer model name: VEHO 1000-16A - Made by a company from: China - Launched: March 2026 - Still made: Yes [Read more by the manufacturer](https://www.tronxy3d.com/products/tronxy-veho-1000-16a-fully-enclosed-high-speed-3d-printer-1000-1000-1600mm-large-format-direct-drive-extrusion) ## What filament can the Tronxy VEHO 1000-16A print? Filament compatibility for the Tronxy VEHO 1000-16A: the materials it can handle, judged from its hotend, bed, chamber and enclosure. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. | | PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). | | TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. | | ABS & ASA | Great | Enclosed, with a hot enough hotend and bed: ABS and ASA print well. | | Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. | | Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Tronxy VEHO 1000-16A Filaments the Tronxy VEHO 1000-16A prints well, Tronxy's own first, then the best known. - [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C - [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C - [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C - [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C - [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C - [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-260 °C - [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-260 °C ## When to choose the Tronxy VEHO 1000-16A Choose the VEHO 1000-16A when the part itself is the reason: furniture, moulds, large props or architectural models that no desktop printer can hold. The VEHO 1000-20A is the same footprint with a different height, so pick by the tallest part you print. For ordinary large prints, the VEHO 800A or 600A are far easier to house and to keep warm. SimplyPrint connection through Klipper is expected but not yet confirmed. ### Pros - 1000 x 1000 x 1600 mm build volume in a fully enclosed frame with a door (Tronxy and our facts). - Klipper at up to 500 mm/s with a 320 °C hotend, direct-drive extrusion and a large-gear dual-drive extruder (Tronxy). - 36-point auto-leveling, four independent Z motors and seven linear guides (Tronxy). - Power-off resume and resonance compensation are listed (Tronxy). - Klipper is expected to work with SimplyPrint, giving remote control of a machine this size. ### Cons - SimplyPrint compatibility is expected through Klipper but not yet confirmed for this model. - Enormous to house, and a failed print at this size wastes a lot of material. - Tronxy's page lists no camera, and we hold no Wi-Fi, Ethernet or material details for this model. - Not a classroom printer: its size and heat make it hard to supervise. - No independent hands-on review found, so the claims here are Tronxy's own. ### Who it suits - Schools: Not a good fit. Far too large and hot for a classroom. - Hobbyists: Can work. Only worth it if you really need the size; costly to buy and to feed. - Businesses: Good fit. Large enclosed parts in one piece; limited by no independent reliability data and thin specs. - Print farms: Not a good fit. One machine this size is not a fleet unit, and its SimplyPrint connection is unconfirmed. ## Compare the Tronxy VEHO 1000-16A with similar printers - [Tronxy VEHO 1000-20A](https://simplyprint.io/compatibility/tronxy-veho-1000-20a): Expected to work, 1000 x 1000 x 2000 mm, Also by Tronxy · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Tronxy VEHO 2010-10A](https://simplyprint.io/compatibility/tronxy-veho-2010-10a): Compatible, 2000 x 1000 x 1000 mm, Also by Tronxy · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [MINGDA Raptor 1200](https://simplyprint.io/compatibility/mingda-raptor-1200): Expected to work, 1200 x 1200 x 1200 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Modix Everest](https://simplyprint.io/compatibility/modix-everest): Compatible, 970 x 1030 x 2000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Compare the Tronxy VEHO 1000-16A with other printers](https://simplyprint.io/compatibility/compare?compare=tronxy-veho-1000-16a#choose) ## Where to buy the Tronxy VEHO 1000-16A - [Tronxy's global store](https://simplyprint.io/buy/8388) (Official store) ## About Tronxy Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money. - Headquarters: Shenzhen, China - Website: https://www.tronxy.com Openness: Open (4.3 of 5) Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request. - Firmware and custom firmware (4 of 5): Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA. - Local control and integrations (5 of 5): We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB. - Third-party filament, slicers and parts (4 of 5): Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts. - Repairs and spare parts (4 of 5): Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts. - Community and documentation (3 of 5): Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly. ### Pros - Very large build volumes for the price, up to 1,000 mm and more in the VEHO line. - Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper. - No cloud or account: print over USB, memory card, Wi-Fi or Ethernet. - Spare mainboards, hotends and nozzles sold for current and older models. ### Cons - Firmware on Tronxy's website is by email request rather than a direct download. - Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit. - VEHO hotends and print heads are Tronxy-specific parts. ### Track record - October 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024. - December 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021. How Tronxy compares with every other brand: https://simplyprint.io/articles/best-3d-printer Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Tronxy VEHO 1000-16A compatible with SimplyPrint? Most likely. We expect the Tronxy VEHO 1000-16A to connect to SimplyPrint via Klipper (Moonraker), but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone. ### How do I connect the Tronxy VEHO 1000-16A to SimplyPrint? Follow our step-by-step setup guide for the Tronxy VEHO 1000-16A. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick. ### What slicer should I use for the Tronxy VEHO 1000-16A? Cura, PrusaSlicer and OrcaSlicer all work with the Tronxy VEHO 1000-16A, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device. ### Can I use OrcaSlicer with the Tronxy VEHO 1000-16A? Yes, but OrcaSlicer has no built-in profile for the Tronxy VEHO 1000-16A that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Tronxy VEHO 1000-16A print? Based on its specs (hotend up to 320C, heated bed up to 100C), the Tronxy VEHO 1000-16A handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites. ### Does the Tronxy VEHO 1000-16A work with OctoPrint or Klipper? The Tronxy VEHO 1000-16A works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Tronxy VEHO 1000-16A's bed size and build volume? The Tronxy VEHO 1000-16A has a 1000 x 1000 mm print bed and prints up to 1600 mm tall, a build volume of about 1000 x 1000 x 1600 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Tronxy VEHO 1000-16A come out? Tronxy launched the VEHO 1000-16A in March 2026. ### Can the Tronxy VEHO 1000-16A eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue. ### Where can I buy the Tronxy VEHO 1000-16A? From Tronxy's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.