# Tractus3D T3500SE: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By Tractus3D, Netherlands
- Launched May 2022
- Canonical page: https://simplyprint.io/compatibility/tractus3d-t3500se

## Tractus3D T3500SE at a glance

The Tractus3D T3500SE is a 3D printer by Tractus3D with a 1000 x 1000 x 2200 mm build volume.

- Build volume: 1000 x 1000 x 2200 mm
- Enclosure: Fully enclosed
- Motion system: Delta
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Built-in camera: Yes
- Connectivity: Ethernet, Wi-Fi

## Connect the Tractus3D T3500SE to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| Duet (RepRapFirmware) | Compatible | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client | Runs RepRapFirmware: the maker's manual sets the network with M552 in config.g through the RRF web interface and uploads firmware there (Duet-style). Check it is a Duet board. ([Source](https://web.archive.org/web/2023/https://tractus3d.com/wp-content/uploads/2022/10/Manual-LARGE-VOLUME-SE-series-2022-v1.pdf)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Takes jobs over LAN through the RepRapFirmware web interface; the manual names no USB connection for a computer. ([Source](https://web.archive.org/web/2023/https://tractus3d.com/wp-content/uploads/2022/10/Manual-LARGE-VOLUME-SE-series-2022-v1.pdf)) |
| Klipper (Moonraker) | Not compatible |  | Ships RepRapFirmware; Klipper only after you install it. ([Source](https://web.archive.org/web/2023/https://tractus3d.com/knowledge/first-time-use/setup-the-network)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on Tractus3D T3500SE](https://simplyprint.io/setup-guide/tractus3d/t3500se.md)

### What works with SimplyPrint

Connected through Duet (RepRapFirmware), SimplyPrint supports everything the Tractus3D T3500SE lets other software do: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint.

## What slicer to use for the Tractus3D T3500SE

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tractus3D T3500SE, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Tractus3D T3500SE · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Tractus3D T3500SE · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Tractus3D T3500SE · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Tractus3D T3500SE · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Tractus3D T3500SE · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Tractus3D T3500SE · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Tractus3D T3500SE · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tractus3D T3500SE.

## The app for the Tractus3D T3500SE

Tractus3D doesn't make an app for the Tractus3D T3500SE. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Tractus3D T3500SE to SimplyPrint, free](https://simplyprint.io/setup-guide/tractus3d/t3500se) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Tractus3D T3500SE

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Tractus3D T3500SE specifications: bed size, print height and more

### Size

- Build volume: 1000 x 1000 x 2200 mm
- Bed type: Circle
- Bed size: 1000 mm diameter
- Max print height: 2200 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: Delta
- Max extruder temperature: 500 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Ethernet, Wi-Fi
- Built-in camera: Yes
- Supports serial printing: No
- Shipped firmware: RepRapFirmware (Duet)

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Tractus3D
- Printer model name: T3500SE
- Made by a company from: Netherlands
- Launched: May 2022

[Read more by the manufacturer](https://web.archive.org/web/2023/https://tractus3d.com/products/t3500se/)

## What filament can the Tractus3D T3500SE print?

Filament compatibility for the Tractus3D T3500SE: the materials Tractus3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Tractus3D T3500SE

Filaments the Tractus3D T3500SE prints well, Tractus3D's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-260 °C
- [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-260 °C

## Compare the Tractus3D T3500SE with similar printers

- [Modix Everest](https://simplyprint.io/compatibility/modix-everest): Compatible, 970 x 1030 x 2000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [MINGDA Raptor 1200](https://simplyprint.io/compatibility/mingda-raptor-1200): Expected to work, 1200 x 1200 x 1200 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Tronxy VEHO 1000-16A](https://simplyprint.io/compatibility/tronxy-veho-1000-16a): Expected to work, 1000 x 1000 x 1600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Tronxy VEHO 1000-20A](https://simplyprint.io/compatibility/tronxy-veho-1000-20a): Expected to work, 1000 x 1000 x 2000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Compare the Tractus3D T3500SE with other printers](https://simplyprint.io/compatibility/compare?compare=tractus3d-t3500se#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Tractus3D T3500SE compatible with SimplyPrint?

Yes. You can connect the Tractus3D T3500SE to SimplyPrint via Duet (RepRapFirmware), then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the Tractus3D T3500SE to SimplyPrint?

Follow our step-by-step setup guide for the Tractus3D T3500SE. It shows how to connect it via Duet (RepRapFirmware), what you need for each, and which to pick.

### What slicer should I use for the Tractus3D T3500SE?

Cura, PrusaSlicer and OrcaSlicer all work with the Tractus3D T3500SE, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Tractus3D T3500SE?

Yes, but OrcaSlicer has no built-in profile for the Tractus3D T3500SE that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Tractus3D T3500SE print?

Tractus3D lists PLA, PETG, ABS & ASA, TPU & flexibles, Nylon (PA) and Polycarbonate (PC) for the T3500SE.

### Does the Tractus3D T3500SE work with OctoPrint or Klipper?

Not that we know of, but you don't need either: SimplyPrint connects to the Tractus3D T3500SE via Duet (RepRapFirmware).

### What is the Tractus3D T3500SE's bed size and build volume?

The Tractus3D T3500SE has a 1000 x 1000 mm print bed and prints up to 2200 mm tall, a build volume of about 1000 x 1000 x 2200 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Tractus3D T3500SE come out?

Tractus3D launched the T3500SE in May 2022.

### Can the Tractus3D T3500SE eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.