# Tiertime UP600 HS: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Tiertime, China
- Launched 2026
- Canonical page: https://simplyprint.io/compatibility/tiertime-up600-hs

## Tiertime UP600 HS at a glance

The UP600 HS is Tiertime's large enclosed printer with a 500 x 400 x 600 mm build volume, HEPA and carbon filtering and a 299 °C extruder. It is for workshops that need big, closed engineering-material parts and work in Tiertime's software.

- Build volume: 500 x 400 x 600 mm
- Enclosure: Fully enclosed
- Max print speed: 200 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Connectivity: USB, Wi-Fi, Ethernet

## Connect the Tiertime UP600 HS to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Newer UP firmware with a Linux touchscreen and G-code import (OrcaSlicer); no source on serial printing or OctoPrint. ([Source](https://www.tiertime.com/up600hs/)) |
| Klipper (Moonraker) | Not compatible |  | Closed Tiertime firmware; no Klipper. ([Source](https://www.tiertime.com/up600hs/)) |

- [Help us confirm](https://simplyprint.io/compatibility/tiertime-up600-hs/confirm)

## What slicer to use for the Tiertime UP600 HS

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP600 HS that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Tiertime UP600 HS · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Tiertime UP600 HS · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Tiertime UP600 HS · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Tiertime UP600 HS · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Tiertime UP600 HS · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Tiertime UP600 HS · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Tiertime UP600 HS · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tiertime UP600 HS.

## Tiertime UP600 HS specifications: bed size, print height and more

### Size

- Build volume: 500 x 400 x 600 mm
- Bed type: Square
- Bed size: 500 x 400 mm
- Max print height: 600 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 200 mm/s
- Max extruder temperature: 299 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB, Wi-Fi, Ethernet
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Tiertime
- Printer model name: UP600 HS
- Made by a company from: China
- Launched: 2026

[Read more by the manufacturer](https://www.tiertime.com/up600hs/)

## What filament can the Tiertime UP600 HS print?

Filament compatibility for the Tiertime UP600 HS: the materials Tiertime lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

## When to choose the Tiertime UP600 HS

Choose the UP600 HS when a closed machine with a tall 600 mm build height and filtered air matters more than speed: it prints at up to 200 mm/s. Its 299 °C extruder covers ABS, ASA, PETG, TPU, PC, nylon and composites. For a heated chamber and a 400 °C extruder, the UP400 Pro is the higher-spec Tiertime; for large builds at lower cost see the open-frame Tronxy VEHO printers.

### Pros

- 500 x 400 x 600 mm build volume in a fully enclosed machine (Tiertime).
- HEPA and activated-carbon filtration, and printing pauses when the front door opens (Tiertime).
- Handles ABS, ASA, PETG, TPU, PC, PC-ABS, nylon, PET-CF, PP-GF and PPS filaments (Tiertime).
- Wi-Fi, Ethernet, USB and USB stick, a 7-inch touchscreen and a Tiertime Print Queue for several users (Tiertime).
- Out-of-filament detection, automatic levelling and pause to change filament (Tiertime).

### Cons

- Print speed is limited to 200 mm/s and 5,000 mm/s² acceleration, slow for a printer this size.
- Extruder tops out at 299 °C with a single extruder, which limits the hottest materials.
- No confirmed SimplyPrint connection method in our facts: Klipper is incompatible and OctoPrint is unknown.
- No camera in our facts, and no independent hands-on review found.

### Who it suits

- Schools: Can work. Enclosed and filtered, but very large and costly for a classroom, and we cannot confirm a SimplyPrint connection for approval queues.
- Hobbyists: Not a good fit. Big, expensive and slow for what most hobbyists print.
- Businesses: Good fit. Large closed engineering-plastic parts, with Tiertime's own queue rather than SimplyPrint.
- Print farms: Not a good fit. 200 mm/s, no confirmed SimplyPrint connection and no camera or plate-swap kit in our facts.

## Printers like the Tiertime UP600 HS that work with SimplyPrint

- [Sovol SV08 Max (Heat Chamber)](https://simplyprint.io/compatibility/sovol-sv08-max-heat-chamber): Compatible, 500 x 500 x 450 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [MINGDA Raptor 450](https://simplyprint.io/compatibility/mingda-raptor-450): Expected to work, 450 x 450 x 500 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- [Tronxy VEHO 500A](https://simplyprint.io/compatibility/tronxy-veho-500a): Compatible, 500 x 500 x 500 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Kentstrapper Bold 755](https://simplyprint.io/compatibility/kentstrapper-bold-755): Compatible, 700 x 500 x 500 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled

## Frequently asked questions

### Is the Tiertime UP600 HS compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Tiertime UP600 HS, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Tiertime UP600 HS?

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP600 HS that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Tiertime UP600 HS print?

Tiertime lists ABS & ASA, PETG, TPU & flexibles, Polycarbonate (PC), Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the UP600 HS.

### What is the Tiertime UP600 HS's bed size and build volume?

The Tiertime UP600 HS has a 500 x 400 mm print bed and prints up to 600 mm tall, a build volume of about 500 x 400 x 600 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Tiertime UP600 HS come out?

Tiertime launched the UP600 HS in 2026.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.