# Tiertime UP300: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Tiertime, China
- Launched 2018
- Canonical page: https://simplyprint.io/compatibility/tiertime-up300

## Tiertime UP300 at a glance

The Tiertime UP300 is a 3D printer by Tiertime with a 205 x 255 x 225 mm build volume.

- Build volume: 205 x 255 x 225 mm
- Enclosure: Fully enclosed
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Connectivity: USB, Wi-Fi, Ethernet

## Connect the Tiertime UP300 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | UP printers take Tiertime's own 'UP machine code' over USB from UP Studio, not G-code over serial; a community tool converts G-code to it, not a live serial link. ([Source](https://github.com/MaikStohn/UP3D)) |
| Klipper (Moonraker) | Not compatible |  | Closed Tiertime firmware; no Klipper. ([Source](https://www.tiertime.com/up300/)) |

## What slicer to use for the Tiertime UP300

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP300 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Tiertime UP300 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Tiertime UP300 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Tiertime UP300 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Tiertime UP300 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Tiertime UP300 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Tiertime UP300 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Tiertime UP300 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tiertime UP300.

## Tiertime UP300 specifications: bed size, print height and more

### Size

- Build volume: 205 x 255 x 225 mm
- Bed type: Square
- Bed size: 205 x 255 mm
- Max print height: 225 mm

### Printing

- Enclosure: Fully enclosed
- Max extruder temperature: 299 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB, Wi-Fi, Ethernet
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Tiertime
- Printer model name: UP300
- Made by a company from: China
- Launched: 2018

[Read more by the manufacturer](https://www.tiertime.com/up300/)

## What filament can the Tiertime UP300 print?

Filament compatibility for the Tiertime UP300: the materials Tiertime lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Tiertime UP300 that work with SimplyPrint

- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Creality K1](https://simplyprint.io/compatibility/creality-k1): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Tiertime UP300

- [Tiertime's global store](https://simplyprint.io/buy/8359) (Official store)

## Frequently asked questions

### Is the Tiertime UP300 compatible with SimplyPrint?

To our knowledge the Tiertime UP300 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Tiertime UP300?

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP300 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Tiertime UP300 print?

Tiertime lists PLA, ABS & ASA and TPU & flexibles for the UP300.

### What is the Tiertime UP300's bed size and build volume?

The Tiertime UP300 has a 205 x 255 mm print bed and prints up to 225 mm tall, a build volume of about 205 x 255 x 225 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Tiertime UP300 come out?

Tiertime launched the UP300 in 2018.

### Where can I buy the Tiertime UP300?

From Tiertime's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.