# Tiertime UP300 HS: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Tiertime, China
- Launched 2026
- Canonical page: https://simplyprint.io/compatibility/tiertime-up300-hs

## Tiertime UP300 HS at a glance

The UP300 HS is Tiertime's enclosed professional printer with a 205 x 255 x 225 mm build volume, filtered air and 200 mm/s speed. It is for schools and workshops that want a closed, filtered machine for ABS, PETG, TPU and engineering plastics.

- Build volume: 205 x 255 x 225 mm
- Enclosure: Fully enclosed
- Max print speed: 200 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Connectivity: USB, Wi-Fi, Ethernet

## Connect the Tiertime UP300 HS to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Newer UP firmware with a Linux touchscreen and G-code import (OrcaSlicer); no source on serial printing or OctoPrint. ([Source](https://www.tiertime.com/up300hs/)) |
| Klipper (Moonraker) | Not compatible |  | Closed Tiertime firmware; no Klipper. ([Source](https://www.tiertime.com/up300hs/)) |

- [Help us confirm](https://simplyprint.io/compatibility/tiertime-up300-hs/confirm)

## What slicer to use for the Tiertime UP300 HS

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP300 HS that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Tiertime UP300 HS · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Tiertime UP300 HS · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Tiertime UP300 HS · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Tiertime UP300 HS · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Tiertime UP300 HS · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Tiertime UP300 HS · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Tiertime UP300 HS · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tiertime UP300 HS.

## Tiertime UP300 HS specifications: bed size, print height and more

### Size

- Build volume: 205 x 255 x 225 mm
- Bed type: Square
- Bed size: 205 x 255 mm
- Max print height: 225 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 200 mm/s
- Max extruder temperature: 299 °C
- Has heated bed: Yes
- Max bed temperature: 100 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB, Wi-Fi, Ethernet
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Tiertime
- Printer model name: UP300 HS
- Made by a company from: China
- Launched: 2026

[Read more by the manufacturer](https://www.tiertime.com/up300hs/)

## What filament can the Tiertime UP300 HS print?

Filament compatibility for the Tiertime UP300 HS: the materials Tiertime lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

## When to choose the Tiertime UP300 HS

Choose the UP300 HS when you need a closed printer with HEPA and activated-carbon filtering for ABS, ASA, PETG, TPU, PC and nylon, and you are fine with Tiertime's own UP Studio (OrcaSlicer is also listed). The build volume is modest and 200 mm/s is far below the new 500 to 700 mm/s hobby machines. For a heated-chamber machine with a bigger plate in the same family, see the UP400 Pro; for plain PLA at lower cost, an enclosed hobby printer like the Bambu Lab P2S is cheaper.

### Pros

- Fully enclosed with dual HEPA and activated-carbon filtration, and printing pauses when the front door opens (Tiertime).
- Prints ABS, ASA, PETG, TPU, PC, PA, PA-CF, PPS and other engineering filaments, and accepts third-party filament (Tiertime).
- Automatic levelling, filament run-out detection, pause to change filament and power-over USB for an external camera (Tiertime).
- Wi-Fi, Ethernet, USB cable and USB stick, with a Tiertime Print Queue for several users on a network (Tiertime).
- Removable waste collection tray and interchangeable double-sided build plates (Tiertime).

### Cons

- Max print speed is 200 mm/s with 5,000 mm/s² acceleration, slower than today's high-speed printers.
- No built-in camera in our facts; Tiertime offers a USB port for an external one.
- No confirmed SimplyPrint connection method in our facts: Klipper is incompatible and OctoPrint is unknown in our facts, and it is run through Tiertime's UP Studio and Print Queue.
- Tiertime lists a single extruder with a 299 °C limit, so very high-temperature materials are out of reach.

### Who it suits

- Schools: Good fit. Closed, filtered and pauses when the door opens, though we cannot confirm a SimplyPrint connection for approval queues and it is an industrial machine.
- Hobbyists: Can work. Capable with engineering materials, but slower and dearer than modern hobby printers.
- Businesses: Good fit. Closed, filtered and suited to ABS, PC and nylon prototypes with Tiertime's own queue.
- Print farms: Not a good fit. 200 mm/s speed, no confirmed SimplyPrint connection and no plate-swap kit in our facts make it a weak farm unit.

## Printers like the Tiertime UP300 HS that work with SimplyPrint

- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Anycubic Kobra S1](https://simplyprint.io/compatibility/anycubic-kobra-s1): Compatible, 250 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [ELEGOO Centauri Carbon](https://simplyprint.io/compatibility/elegoo-centauri-carbon): Compatible, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the Tiertime UP300 HS compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Tiertime UP300 HS, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Tiertime UP300 HS?

None of the slicers in SimplyPrint's cloud can slice for the Tiertime UP300 HS that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Tiertime UP300 HS print?

Tiertime lists ABS & ASA, PETG, TPU & flexibles, Polycarbonate (PC), Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the UP300 HS.

### What is the Tiertime UP300 HS's bed size and build volume?

The Tiertime UP300 HS has a 205 x 255 mm print bed and prints up to 225 mm tall, a build volume of about 205 x 255 x 225 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Tiertime UP300 HS come out?

Tiertime launched the UP300 HS in 2026.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.