# Stratasys F770: specs, SimplyPrint compatibility and setup

> **Possible, not built yet**. The maker's software would allow it, but we haven't built it yet.

- By Stratasys
- Launched April 27, 2021
- Canonical page: https://simplyprint.io/compatibility/stratasys-f770

## Stratasys F770 at a glance

Stratasys's large-format FDM printer: a 1,000 x 610 x 610 mm build envelope in a fully heated chamber, for ASA and ABS-M30 with soluble support. It makes large prototypes, jigs and fixtures in one piece.

- Build volume: 1000 x 610 x 610 mm
- Enclosure: Fully enclosed
- Prints well: ABS & ASA
- Built-in camera: Yes
- Connectivity: Ethernet, Wi-Fi

## Connect the Stratasys F770 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| The maker's cloud | Possible, not built yet |  | Prints through Stratasys's GrabCAD Print. GrabCAD's SDK gives software vendors APIs to connect Stratasys printers to their systems; its first packages covered the F123 Series, F900 and Fortus 450mc. SimplyPrint could build support on it, but it isn't built yet. ([Source](https://investors.stratasys.com/news-events/press-releases/detail/719/stratasys-brings-enterprise-software-connectivity-to-3d)) |
| SimplyPrint Client | Not compatible |  | Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f770-printer/br_fdm_f770_0825a.pdf)) |
| Klipper (Moonraker) | Not compatible |  | Runs Stratasys's closed controller and prints from Stratasys's own software; no Klipper or Moonraker is documented. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f770-printer/br_fdm_f770_0825a.pdf)) |
| OctoPrint (Directly, over USB) | Not compatible |  | Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print; no OctoPrint or serial control is documented. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f770-printer/br_fdm_f770_0825a.pdf)) |

## What slicer to use for the Stratasys F770

None of the slicers in SimplyPrint's cloud can slice for the Stratasys F770 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Stratasys F770 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Stratasys F770 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Stratasys F770 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Stratasys F770 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Stratasys F770 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Stratasys F770 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Stratasys F770 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Stratasys F770.

## Stratasys F770 specifications: bed size, print height and more

### Size

- Build volume: 1000 x 610 x 610 mm
- Bed type: Rectangle
- Bed size: 1000 x 610 mm
- Max print height: 610 mm

### Printing

- Enclosure: Fully enclosed
- Max extruder temperature: 330 °C
- Has heated bed: No
- Heated chamber: Yes
- Number of nozzles: 1
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Connecting

- Connectivity: Ethernet, Wi-Fi
- Built-in camera: Yes
- Supports serial printing: No
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Stratasys
- Printer model name: F770
- Launched: April 27, 2021
- Still made: Yes

[Read more by the manufacturer](https://www.stratasys.com/en/3d-printers/printer-catalog/fdm-printers/f770-printer/)

## What filament can the Stratasys F770 print?

Filament compatibility for the Stratasys F770: the materials Stratasys lists for it. It prints only Stratasys's own materials.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| PETG | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| TPU & flexibles | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| Polycarbonate (PC) | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| Carbon-fiber & glass-filled | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |

## When to choose the Stratasys F770

Choose it when parts are long rather than exotic: Stratasys calls its build chamber the longest fully heated one on the market, 1,171 mm on the diagonal. For ULTEM, nylon or PC, the F900 or F3300 is the one.

### Pros

- 1,000 x 610 x 610 mm build envelope, up to 1,171 mm on the diagonal.
- Fully heated build chamber and soluble support.
- Material boxes of 3,277 cm3 run up to 140 hours unattended.
- A built-in camera, with status checks from GrabCAD Print on a phone.

### Cons

- Not supported by SimplyPrint yet: support could be built on GrabCAD's SDK.
- Runs Stratasys's closed controller with GrabCAD Print, so there is no OctoPrint or Klipper route.
- Prints ASA and ABS-M30 only, and only Stratasys's own material.
- Needs three-phase power and weighs 658 kg.

### Who it suits

- Schools: Not a good fit. A 658 kg machine on three-phase power with a narrow material range.
- Hobbyists: Not a good fit. Built for industrial large-format parts.
- Businesses: Great fit. Large prototypes and tooling in one piece instead of glued sections.
- Print farms: Can work. GrabCAD Print queues jobs across Stratasys printers, but SimplyPrint cannot manage it today.

## Printers like the Stratasys F770 that work with SimplyPrint

- [MINGDA Raptor 800](https://simplyprint.io/compatibility/mingda-raptor-800): Expected to work, 800 x 800 x 800 mm, Similar build volume · Also prints ABS & ASA
- [Tronxy VEHO 800A](https://simplyprint.io/compatibility/tronxy-veho-800a): Compatible, 800 x 800 x 800 mm, Similar build volume · Also prints ABS & ASA
- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Also prints ABS & ASA
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Also prints ABS & ASA

## Frequently asked questions

### Is the Stratasys F770 compatible with SimplyPrint?

Not yet. The maker's software would allow SimplyPrint to connect to the Stratasys F770, but we haven't built it.

### What slicer should I use for the Stratasys F770?

None of the slicers in SimplyPrint's cloud can slice for the Stratasys F770 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Stratasys F770 print?

Stratasys lists ABS & ASA for the F770. It prints only Stratasys's own materials.

### What is the Stratasys F770's bed size and build volume?

The Stratasys F770 has a 1000 x 610 mm print bed and prints up to 610 mm tall, a build volume of about 1000 x 610 x 610 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Stratasys F770 come out?

Stratasys launched the F770 on April 27, 2021.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.