# Stratasys F370CR: specs, SimplyPrint compatibility and setup

> **Possible, not built yet**. The maker's software would allow it, but we haven't built it yet.

- By Stratasys
- Launched May 4, 2022
- Canonical page: https://simplyprint.io/compatibility/stratasys-f370cr

## Stratasys F370CR at a glance

The larger composite-ready F123 printer: a 355 x 254 x 355 mm tray, four material bays, and hardened heads for ABS-CF10 and Nylon-CF10 in a fully heated build chamber. It is aimed at manufacturers replacing metal jigs, fixtures and tooling.

- Build volume: 355 x 254 x 355 mm
- Enclosure: Fully enclosed
- Prints well: TPU & flexibles, ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: Ethernet, Wi-Fi

## Connect the Stratasys F370CR to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| The maker's cloud | Possible, not built yet |  | Prints through Stratasys's GrabCAD Print. GrabCAD's SDK gives software vendors APIs to connect Stratasys printers to their systems; its first packages covered the F123 Series, F900 and Fortus 450mc. SimplyPrint could build support on it, but it isn't built yet. ([Source](https://investors.stratasys.com/news-events/press-releases/detail/719/stratasys-brings-enterprise-software-connectivity-to-3d)) |
| SimplyPrint Client | Not compatible |  | Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f123-cr/brochures/stratasys-F370CR-brochure-0625b.pdf)) |
| Klipper (Moonraker) | Not compatible |  | Runs Stratasys's closed controller and prints from Stratasys's own software; no Klipper or Moonraker is documented. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f123-cr/brochures/stratasys-F370CR-brochure-0625b.pdf)) |
| OctoPrint (Directly, over USB) | Not compatible |  | Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print; no OctoPrint or serial control is documented. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f123-cr/brochures/stratasys-F370CR-brochure-0625b.pdf)) |

## What slicer to use for the Stratasys F370CR

None of the slicers in SimplyPrint's cloud can slice for the Stratasys F370CR that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Stratasys F370CR · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Stratasys F370CR · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Stratasys F370CR · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Stratasys F370CR · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Stratasys F370CR · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Stratasys F370CR · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Stratasys F370CR · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Stratasys F370CR.

## Stratasys F370CR specifications: bed size, print height and more

### Size

- Build volume: 355 x 254 x 355 mm
- Bed type: Rectangle
- Bed size: 355 x 254 mm
- Max print height: 355 mm

### Printing

- Enclosure: Fully enclosed
- Max extruder temperature: 330 °C
- Has heated bed: No
- Heated chamber: Yes
- Number of nozzles: 1
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Connecting

- Connectivity: Ethernet, Wi-Fi
- Built-in camera: Yes
- Supports serial printing: No
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Stratasys
- Printer model name: F370CR
- Launched: May 4, 2022
- Still made: Yes

[Read more by the manufacturer](https://www.stratasys.com/en/3d-printers/printer-catalog/fdm-printers/f370-composite-ready/)

## What filament can the Stratasys F370CR print?

Filament compatibility for the Stratasys F370CR: the materials Stratasys lists for it. It prints only Stratasys's own materials.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| PETG | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## When to choose the Stratasys F370CR

Choose it over the F190CR for the bigger tray and four material bays. If you don't need carbon-fibre nylon, the F370 prints a wider range of standard materials.

### Pros

- Four material bays: two model, two support.
- Hardened components and heads built for abrasive carbon-fibre materials.
- Sealed filament bays and a fully heated build chamber.
- Also prints ABS-M30, ASA and TPU 92A, with soluble support.

### Cons

- Not supported by SimplyPrint yet: support could be built on GrabCAD's SDK.
- Runs Stratasys's closed controller with GrabCAD Print, so there is no OctoPrint or Klipper route.
- Prints only Stratasys's own material spools.

### Who it suits

- Schools: Can work. Enclosed and GREENGUARD certified with several materials, but its composites are more than most classrooms need.
- Hobbyists: Not a good fit. An industrial machine with proprietary materials and a price to match.
- Businesses: Great fit. Carbon-fibre parts that can replace machined metal tooling, with long unattended runs.
- Print farms: Can work. GrabCAD Print queues jobs across Stratasys printers, but SimplyPrint cannot manage it today.

## The Stratasys F123 series

- [Stratasys F170](https://simplyprint.io/compatibility/stratasys-f170): Launched February 2017
- [Stratasys F370](https://simplyprint.io/compatibility/stratasys-f370): Launched February 2017
- [Stratasys F190CR](https://simplyprint.io/compatibility/stratasys-f190cr): Launched May 4, 2022
- **Stratasys F370CR**: Launched May 4, 2022

## Printers like the Stratasys F370CR that work with SimplyPrint

- [Mattershaper Salute](https://simplyprint.io/compatibility/mattershaper-salute): Compatible, 300 x 300 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled
- [Prusa Pro HT90](https://simplyprint.io/compatibility/prusa-pro-ht90): Compatible, 300 x 300 x 400 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled
- [FLSUN S1 Pro](https://simplyprint.io/compatibility/flsun-s1-pro): Compatible, 320 x 320 x 430 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)

## Frequently asked questions

### Is the Stratasys F370CR compatible with SimplyPrint?

Not yet. The maker's software would allow SimplyPrint to connect to the Stratasys F370CR, but we haven't built it.

### What slicer should I use for the Stratasys F370CR?

None of the slicers in SimplyPrint's cloud can slice for the Stratasys F370CR that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Stratasys F370CR print?

Stratasys lists ABS & ASA, TPU & flexibles, Carbon-fiber & glass-filled and Nylon (PA) for the F370CR. It prints only Stratasys's own materials.

### What is the Stratasys F370CR's bed size and build volume?

The Stratasys F370CR has a 355 x 254 mm print bed and prints up to 355 mm tall, a build volume of about 355 x 254 x 355 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Stratasys F370CR come out?

Stratasys launched the F370CR on May 4, 2022.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.