# Stratasys F370: specs, SimplyPrint compatibility and setup > **Possible, not built yet**. The maker's software would allow it, but we haven't built it yet. - By Stratasys - Launched February 2017 - Canonical page: https://simplyprint.io/compatibility/stratasys-f370 ## Stratasys F370 at a glance The largest standard model of Stratasys's F123 Series: a 355 x 254 x 355 mm tray, a heated build chamber, four material bays and the widest material choice in the series. It is built for prototyping and manufacturing aids in engineering teams. - Build volume: 355 x 254 x 355 mm - Enclosure: Fully enclosed - Prints well: PLA, TPU & flexibles, ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled - Built-in camera: Yes - Connectivity: Ethernet, Wi-Fi ## Connect the Stratasys F370 to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | The maker's cloud | Possible, not built yet | | Prints through Stratasys's GrabCAD Print, and GrabCAD's SDK gives software vendors APIs to connect Stratasys FDM printers to their systems. SimplyPrint could build support on it, but it isn't built yet. ([Source](https://investors.stratasys.com/news-events/press-releases/detail/719/stratasys-brings-enterprise-software-connectivity-to-3d)) | | SimplyPrint Client | Not compatible | | Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f123-series-printers/brochures/stratasys-F370-brochure-0625a.pdf)) | | Klipper (Moonraker) | Not compatible | | Runs Stratasys's closed controller and prints from Stratasys's own software; no Klipper or Moonraker is documented. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f123-series-printers/brochures/stratasys-F370-brochure-0625a.pdf)) | | OctoPrint (Directly, over USB) | Not compatible | | Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print; no OctoPrint or serial control is documented. ([Source](https://www.stratasys.com/siteassets/3d-printers/printer-catalog/fdm-printers/f123-series-printers/brochures/stratasys-F370-brochure-0625a.pdf)) | ## What slicer to use for the Stratasys F370 None of the slicers in SimplyPrint's cloud can slice for the Stratasys F370 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Stratasys F370 · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Stratasys F370 · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Stratasys F370 · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Stratasys F370 · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Stratasys F370 · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Stratasys F370 · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Stratasys F370 · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Stratasys F370. ## Stratasys F370 specifications: bed size, print height and more ### Size - Build volume: 355 x 254 x 355 mm - Bed type: Rectangle - Bed size: 355 x 254 mm - Max print height: 355 mm ### Printing - Enclosure: Fully enclosed - Max extruder temperature: 330 °C - Has heated bed: No - Heated chamber: Yes - Number of nozzles: 1 - Toolheads: 2 - Direct drive: No - Probing tool / Auto Bed Leveling: No - Filament width: 1.75 mm ### Connecting - Connectivity: Ethernet, Wi-Fi - Built-in camera: Yes - Supports serial printing: No - Shipped firmware: The maker's own ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Stratasys - Printer model name: F370 - Launched: February 2017 - Still made: Yes [Read more by the manufacturer](https://www.stratasys.com/en/3d-printers/printer-catalog/fdm-printers/f370/) ## What filament can the Stratasys F370 print? Filament compatibility for the Stratasys F370: the materials Stratasys lists for it. It prints only Stratasys's own materials. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | Great | On the maker's list of materials for this printer. | | Polycarbonate (PC) | Not ideal | Not on the maker's list, and this printer prints only the maker's own materials. | | Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. | ## When to choose the Stratasys F370 Choose it over the F170 when you need the bigger tray, four material bays, or PC-ABS, ABS-ESD7 and Diran. For carbon-fibre nylon, the F370CR is the composite-ready version. ### Pros - Four material bays: two model, two support. - Prints PLA, ABS-M30, ASA, PC-ABS, ABS-ESD7, Diran 410MF07, ABS-CF10 and TPU 92A. - Soluble support material for complex geometry. - Wired Ethernet and Wi-Fi, with GrabCAD Print and Insight software. ### Cons - Not supported by SimplyPrint yet: support could be built on GrabCAD's SDK. - Runs Stratasys's closed controller with GrabCAD Print, so there is no OctoPrint or Klipper route. - Prints only Stratasys's own material spools. - No carbon-fibre nylon: that needs the F370CR. ### Who it suits - Schools: Good fit. Enclosed and quiet, and GREENGUARD certified with ABS, ASA and QSR support. - Hobbyists: Not a good fit. An industrial machine with proprietary materials and a price to match. - Businesses: Great fit. A broad engineering material range with soluble support and repeatable accuracy. - Print farms: Can work. GrabCAD Print queues jobs across Stratasys printers, but SimplyPrint cannot manage it today. ## The Stratasys F123 series - [Stratasys F170](https://simplyprint.io/compatibility/stratasys-f170): Launched February 2017 - **Stratasys F370**: Launched February 2017 - [Stratasys F190CR](https://simplyprint.io/compatibility/stratasys-f190cr): Launched May 4, 2022 - [Stratasys F370CR](https://simplyprint.io/compatibility/stratasys-f370cr): Launched May 4, 2022 ## Printers like the Stratasys F370 that work with SimplyPrint - [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled - [Bambu Lab H2D Combo](https://simplyprint.io/compatibility/bambu-lab-h2d-combo): Verified by SimplyPrint, 325 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled - [Bambu Lab H2C Combo](https://simplyprint.io/compatibility/bambu-lab-h2c-combo): Verified by SimplyPrint, 330 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled - [Pantheon HS3](https://simplyprint.io/compatibility/pantheon-hs3): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled ## Frequently asked questions ### Is the Stratasys F370 compatible with SimplyPrint? Not yet. The maker's software would allow SimplyPrint to connect to the Stratasys F370, but we haven't built it. ### What slicer should I use for the Stratasys F370? None of the slicers in SimplyPrint's cloud can slice for the Stratasys F370 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends. ### What filament can the Stratasys F370 print? Stratasys lists PLA, ABS & ASA, TPU & flexibles, Carbon-fiber & glass-filled and Nylon (PA) for the F370. It prints only Stratasys's own materials. ### What is the Stratasys F370's bed size and build volume? The Stratasys F370 has a 355 x 254 mm print bed and prints up to 355 mm tall, a build volume of about 355 x 254 x 355 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Stratasys F370 come out? Stratasys launched the F370 in February 2017. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.