# Stratasys F3300: specs, SimplyPrint compatibility and setup

> **Possible, not built yet**. The maker's software would allow it, but we haven't built it yet.

- By Stratasys
- Launched November 2, 2023
- Canonical page: https://simplyprint.io/compatibility/stratasys-f3300

## Stratasys F3300 at a glance

Stratasys's high-speed production FDM printer: a 600 x 600 x 800 mm build chamber, four extruders on an automatic tool changer, onboard material dryers and automatic calibration. It is built for production tooling and end-use parts on the factory floor.

- Build volume: 600 x 600 x 800 mm
- Enclosure: Fully enclosed
- Prints well: PLA, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Built-in camera: Yes
- Connectivity: Ethernet

## Connect the Stratasys F3300 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| The maker's cloud | Possible, not built yet |  | Prints through Stratasys's GrabCAD Print. GrabCAD's SDK gives software vendors APIs to connect Stratasys printers to their systems; its first packages covered the F123 Series, F900 and Fortus 450mc. SimplyPrint could build support on it, but it isn't built yet. ([Source](https://investors.stratasys.com/news-events/press-releases/detail/719/stratasys-brings-enterprise-software-connectivity-to-3d)) |
| SimplyPrint Client | Not compatible |  | Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print. ([Source](https://www.stratasys.com/en/3d-printers/printer-catalog/fdm-printers/f3300-printer/)) |
| Klipper (Moonraker) | Not compatible |  | Runs Stratasys's closed controller and prints from Stratasys's own software; no Klipper or Moonraker is documented. ([Source](https://www.stratasys.com/en/3d-printers/printer-catalog/fdm-printers/f3300-printer/)) |
| OctoPrint (Directly, over USB) | Not compatible |  | Runs Stratasys's closed controller and takes jobs only through Stratasys's own software, such as GrabCAD Print; no OctoPrint or serial control is documented. ([Source](https://www.stratasys.com/en/3d-printers/printer-catalog/fdm-printers/f3300-printer/)) |

## What slicer to use for the Stratasys F3300

None of the slicers in SimplyPrint's cloud can slice for the Stratasys F3300 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Stratasys F3300 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Stratasys F3300 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Stratasys F3300 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Stratasys F3300 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Stratasys F3300 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Stratasys F3300 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Stratasys F3300 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Stratasys F3300.

## Stratasys F3300 specifications: bed size, print height and more

### Size

- Build volume: 600 x 600 x 800 mm
- Bed type: Square
- Bed size: 600 x 600 mm
- Max print height: 800 mm

### Printing

- Enclosure: Fully enclosed
- Max extruder temperature: 405 °C
- Has heated bed: No
- Number of nozzles: 1
- Toolheads: 4
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: Yes

### Connecting

- Connectivity: Ethernet
- Built-in camera: Yes
- Supports serial printing: No
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Stratasys
- Printer model name: F3300
- Launched: November 2, 2023
- Still made: Yes

[Read more by the manufacturer](https://www.stratasys.com/en/3d-printers/printer-catalog/fdm-printers/f3300-printer/)

## What filament can the Stratasys F3300 print?

Filament compatibility for the Stratasys F3300: the materials Stratasys lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

## When to choose the Stratasys F3300

Choose it for production volume: Stratasys says it prints in half the time of its legacy FDM printers, with ULTEM 1010, ULTEM 9085, Nylon 12CF, PC and ASA. The F900 has the larger build volume; the F770 is the large-format option for ASA and ABS.

### Pros

- Four extruders on a tool changer: a standby extruder takes over if one faults.
- Onboard material dryers and automatic calibration after a material change.
- Prints ULTEM 1010 and 9085, Nylon 12CF, PC and ASA.
- Linear encoders on the gantry for accurate positioning: +/- 0.089 mm XY.

### Cons

- Not supported by SimplyPrint yet: support could be built on GrabCAD's SDK.
- Runs Stratasys's closed controller with GrabCAD Print, so there is no OctoPrint or Klipper route.
- Weighs about 1,360 kg and needs a forklift and three-phase power.

### Who it suits

- Schools: Not a good fit. A 1,360 kg production machine on three-phase power.
- Hobbyists: Not a good fit. Built for factory production, not personal use.
- Businesses: Great fit. High-throughput production parts and tooling with high-performance materials.
- Print farms: Can work. Fast and redundant for production, but SimplyPrint cannot manage it today.

## Printers like the Stratasys F3300 that work with SimplyPrint

- [MINGDA MD-600D](https://simplyprint.io/compatibility/mingda-md-600d): Compatible, 600 x 600 x 600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA MD-600 Pro+](https://simplyprint.io/compatibility/mingda-md-600-pro-plus): Expected to work, 600 x 600 x 600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA MD-600D Ultra](https://simplyprint.io/compatibility/mingda-md-600d-ultra): Expected to work, 600 x 600 x 600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [re:3D Gigabot 4](https://simplyprint.io/compatibility/re-3d-gigabot-4): Compatible, 590 x 600 x 600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the Stratasys F3300 compatible with SimplyPrint?

Not yet. The maker's software would allow SimplyPrint to connect to the Stratasys F3300, but we haven't built it.

### What slicer should I use for the Stratasys F3300?

None of the slicers in SimplyPrint's cloud can slice for the Stratasys F3300 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Stratasys F3300 print?

Stratasys lists ABS & ASA, Polycarbonate (PC), Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the F3300.

### What is the Stratasys F3300's bed size and build volume?

The Stratasys F3300 has a 600 x 600 mm print bed and prints up to 800 mm tall, a build volume of about 600 x 600 x 800 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Stratasys F3300 come out?

Stratasys launched the F3300 on November 2, 2023.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.