# Sovol M1D Advanced: specs, SimplyPrint compatibility and setup > **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone. - By Sovol, China - Launched July 2026 - Canonical page: https://simplyprint.io/compatibility/sovol-m1d-advanced ## Sovol M1D Advanced at a glance The M1D Advanced is the M1D with Sovol's enclosure kit and a chamber heater (up to 60 °C): one fixed toolhead plus a six-toolhead changer on a 300 x 300 x 350 mm plate. It is for makers who want seven colours or materials in one print and want to run ABS, ASA, nylon or PC as well. - Build volume: 300 x 300 x 350 mm - Enclosure: Fully enclosed - Max print speed: 600 mm/s - Motion system: CoreXY - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) - Built-in camera: Yes ## Connect the Sovol M1D Advanced to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint | Not confirmed yet - help us find out | | | | Klipper (Moonraker) | Not confirmed yet - help us find out | | Firmware described only as 'fully open-source'; not named. Sovol's SV08/Zero ship Klipper, but nothing confirms the M1D yet and no M1D repo is on Sovol's GitHub. ([Source](https://www.sovol3d.com/products/sovol-m1d-3d-printer)) | | OctoPrint (Directly, over USB) | Not confirmed yet - help us find out | | Firmware and connectivity not published yet. ([Source](https://www.sovol3d.com/products/sovol-m1d-3d-printer)) | - [Help us confirm](https://simplyprint.io/compatibility/sovol-m1d-advanced/confirm) ## What slicer to use for the Sovol M1D Advanced None of the slicers in SimplyPrint's cloud can slice for the Sovol M1D Advanced that we know of: it doesn't take standard G-code. Use the slicer its maker recommends. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Sovol M1D Advanced · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Sovol M1D Advanced · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Sovol M1D Advanced · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Sovol M1D Advanced · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Sovol M1D Advanced · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Sovol M1D Advanced · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Sovol M1D Advanced · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Sovol M1D Advanced. ## Sovol M1D Advanced specifications: bed size, print height and more ### Size - Build volume: 300 x 300 x 350 mm - Bed type: Square - Bed size: 300 x 300 mm - Max print height: 350 mm ### Printing - Enclosure: Fully enclosed - Motion system: CoreXY - Max print speed: 600 mm/s - Max extruder temperature: 300 °C - Has heated bed: Yes - Max bed temperature: 100 °C - Heated chamber: Up to 60 °C - Number of nozzles: 7 - Toolheads: 7 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: Yes - IDEX (independent dual extruders): Yes ### Connecting - Built-in camera: Yes - Supports serial printing: Unknown - Shipped firmware: Unknown ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Sovol - Printer model name: M1D Advanced - Made by a company from: China - Launched: July 2026 - Still made: Yes [Read more by the manufacturer](https://www.sovol3d.com/products/sovol-m1d-3d-printer) ## What filament can the Sovol M1D Advanced print? Filament compatibility for the Sovol M1D Advanced: the materials Sovol lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | Great | On the maker's list of materials for this printer. | | Polycarbonate (PC) | Great | On the maker's list of materials for this printer. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ## When to choose the Sovol M1D Advanced Choose the M1D Advanced when you need the multi-toolhead workflow and also engineering materials: Sovol recommends PLA, PETG, TPU, PVA, ABS, ASA, PA and PC for the enclosed version, and the chamber heats actively to 60 °C. It is a new pre-order machine, so wait for independent tests if reliability matters more than novelty. If you only print PLA and PETG, the M1D Essential (open frame) costs less; for proven multi-colour printing, a Bambu Lab printer with AMS is the safer choice. ### Pros - Enclosure kit with active chamber heating to 60 °C, and Sovol recommends ABS, ASA, PA and PC for this version. - One fixed toolhead plus six tool-changing toolheads, up to seven colours or materials per print, each heated independently (Sovol). - A toolhead swap takes as little as five seconds, with little purge waste (Sovol). - Auto-calibration with cameras, eddy-current bed levelling and a chamber camera with AI detection and time-lapse (Sovol). - Copy and Mirror modes print two identical or mirrored parts at once (Sovol). ### Cons - The 300 x 300 x 350 mm volume applies to single-toolhead use; printing with all seven toolheads is limited to 240 x 300 x 350 mm. - Max nozzle temperature is 300 °C, so very high-temperature materials are out of reach. - We hold no confirmed SimplyPrint connection method for it yet (Klipper and OctoPrint are both unknown). - A pre-order product with no independent hands-on verdict, so toolchanger reliability is unproven. ### Who it suits - Schools: Can work. Enclosed with a chamber camera, but a seven-toolhead changer is more machine than most classrooms need and we cannot confirm a SimplyPrint connection yet. - Hobbyists: Good fit. Multi-colour and engineering materials in one enclosed printer; the main risk is being an early adopter. - Businesses: Good fit. Enclosed with heated chamber for ABS, ASA and PC prototypes and multi-material parts, though unproven. - Print farms: Not a good fit. Complex toolchanger with no track record and no confirmed SimplyPrint connection suits few-printer shops better than a fleet. ## Printers like the Sovol M1D Advanced that work with SimplyPrint - [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Bambu Lab H2D Combo](https://simplyprint.io/compatibility/bambu-lab-h2d-combo): Verified by SimplyPrint, 325 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Creality K2 Plus Combo](https://simplyprint.io/compatibility/creality-k2-plus-combo): Compatible, 350 x 350 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Bambu Lab H2C Combo](https://simplyprint.io/compatibility/bambu-lab-h2c-combo): Verified by SimplyPrint, 330 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) ## Where to buy the Sovol M1D Advanced - [Sovol's global store](https://simplyprint.io/buy/8355) (Official store): $1,499.00 (Price at Sovol, checked October 23, 2026) ## About Sovol Sovol is a Chinese 3D printer maker founded in 2018 that sells low-cost printers and publishes their designs. Its SV08 is a lower-cost derivative of the open-source Voron 2.4, released with its structure, electronics and firmware files, and most current models run Klipper. Its buyers are mainly hobbyists who like to tinker. - Founded: 2018 - Website: https://www.sovol3d.com Openness: Open (4.3 of 5) Sovol is among the most open brands: its printers are standard Klipper machines on open designs, with published files and no cloud. The trade-off is less hand-holding: Tom's Hardware found its larger printer needs experience to tune. - Firmware and custom firmware (4 of 5): Sovol publishes firmware source on GitHub; for the SV08 under GPL-3.0 together with structure files and motherboard designs. Newer repositories, such as the SV08 Max, carry no licence file. Sovol says damage caused by modified or third-party firmware voids its one-year warranty and that it does not help with modifying the source. - Local control and integrations (5 of 5): The SV08 family runs Klipper with the Mainsail interface on the local network, so other software can use Moonraker's documented API. Tom's Hardware drove the SV08 from Mainsail, listed 'doesn't require the cloud', and found 'vanilla Klipper' on the SV08 Max. We found no Sovol cloud service or account requirement. - Third-party filament, slicers and parts (4 of 5): Built on open designs and Klipper, so any filament can be used; Sovol supplies OrcaSlicer profiles, and Tom's Hardware notes the SV08 also works with Cura or PrusaSlicer using Voron settings and takes Bambu-style nozzles. Hotends and extruders are Sovol parts, sold in its store. - Repairs and spare parts (4 of 5): Sovol's store sells parts per model (hotends, extruders, fans, eMMC modules, heated beds), and the SV08's full CAD and motherboard files are public, so parts can be identified or made. - Community and documentation (4 of 5): Strong overlap with the Voron community, which Sovol supports with a donation programme, public GitHub repositories and a wiki; Sovol does not give technical help for modifying the source. ### Pros - Standard Klipper with Mainsail on the local network, no account or cloud. - SV08 structure, electronics and firmware files are published. - Spare parts sold per model, and open designs make parts easy to source. - Low prices for Voron-style machines. ### Cons - Damage caused by modified or third-party firmware voids the one-year warranty. - Sovol does not help with modifying its source code. - Tom's Hardware found the SV08's default slicer profiles very conservative and says the SV08 Max needs an experienced hand to tune. - Newer repositories (SV08 Max, Zero) have no licence file. ### Track record - July 2026: Sovol launched the M1D, an open-source IDEX printer with a tool changer, on Kickstarter, where it passed $2.8 million in pledges. - March 2024: Sovol released the SV08, a lower-cost derivative of the Voron 2.4, and published its structure, hardware and firmware files on GitHub under GPL-3.0. Sovol says it set up a donation programme with the Voron Design team. How Sovol compares with every other brand: https://simplyprint.io/articles/best-3d-printer ## Frequently asked questions ### Is the Sovol M1D Advanced compatible with SimplyPrint? We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Sovol M1D Advanced, our compatibility check tells you in a few questions how it could connect. ### What slicer should I use for the Sovol M1D Advanced? None of the slicers in SimplyPrint's cloud can slice for the Sovol M1D Advanced that we know of: it doesn't take standard G-code. Use the slicer its maker recommends. ### What filament can the Sovol M1D Advanced print? Sovol lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Polycarbonate (PC) for the M1D Advanced. ### What is the Sovol M1D Advanced's bed size and build volume? The Sovol M1D Advanced has a 300 x 300 mm print bed and prints up to 350 mm tall, a build volume of about 300 x 300 x 350 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Sovol M1D Advanced come out? Sovol launched the M1D Advanced in July 2026. ### Where can I buy the Sovol M1D Advanced? From Sovol's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.