# Sindoh 3DWOX 1: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Sindoh, South Korea
- Launched May 2018
- Canonical page: https://simplyprint.io/compatibility/sindoh-3dwox-1

## Sindoh 3DWOX 1 at a glance

The Sindoh 3DWOX 1 is a 3D printer by Sindoh with a 210 x 200 x 195 mm build volume.

- Build volume: 210 x 200 x 195 mm
- Enclosure: Fully enclosed
- Prints well: PLA, PETG, ABS & ASA, Nylon (PA)
- Built-in camera: Yes
- Connectivity: USB, Ethernet, Wi-Fi

## Connect the Sindoh 3DWOX 1 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| OctoPrint (Directly, over USB) | Not expected to work |  | Closed Sindoh firmware driven by 3DWOX Desktop/cloud; an OctoPrint forum thread finds no serial port and no confirmed working setup. ([Source](https://community.octoprint.org/t/octoprint-doesnt-see-a-printer-connected-to-usb/5103)) |
| Klipper (Moonraker) | Not compatible |  | Ships Sindoh's closed firmware; no Klipper. ([Source](https://community.octoprint.org/t/octoprint-doesnt-see-a-printer-connected-to-usb/5103)) |

## What slicer to use for the Sindoh 3DWOX 1

None of the slicers in SimplyPrint's cloud can slice for the Sindoh 3DWOX 1 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Sindoh 3DWOX 1 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Sindoh 3DWOX 1 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Sindoh 3DWOX 1 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Sindoh 3DWOX 1 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Sindoh 3DWOX 1 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Sindoh 3DWOX 1 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Sindoh 3DWOX 1 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Sindoh 3DWOX 1.

## Sindoh 3DWOX 1 specifications: bed size, print height and more

### Size

- Build volume: 210 x 200 x 195 mm
- Bed type: Square
- Bed size: 210 x 200 mm
- Max print height: 195 mm

### Printing

- Enclosure: Fully enclosed
- Max extruder temperature: 250 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No

### Connecting

- Connectivity: USB, Ethernet, Wi-Fi
- Built-in camera: Yes
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Sindoh
- Printer model name: 3DWOX 1
- Made by a company from: South Korea
- Launched: May 2018

[Read more by the manufacturer](https://web.archive.org/web/20190722143856/https://3dprinter.sindoh.com/product/3dwox1)

## What filament can the Sindoh 3DWOX 1 print?

Filament compatibility for the Sindoh 3DWOX 1: the materials Sindoh lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

## Printers like the Sindoh 3DWOX 1 that work with SimplyPrint

- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Creality K1](https://simplyprint.io/compatibility/creality-k1): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Flashforge Adventurer 5M Pro](https://simplyprint.io/compatibility/flashforge-adventurer-5m-pro): Compatible, 220 x 220 x 220 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Snapmaker J1s](https://simplyprint.io/compatibility/snapmaker-j1s): Compatible, 300 x 200 x 200 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)

## Frequently asked questions

### Is the Sindoh 3DWOX 1 compatible with SimplyPrint?

To our knowledge the Sindoh 3DWOX 1 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Sindoh 3DWOX 1?

None of the slicers in SimplyPrint's cloud can slice for the Sindoh 3DWOX 1 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

### What filament can the Sindoh 3DWOX 1 print?

Sindoh lists PLA, ABS & ASA and PETG for the 3DWOX 1.

### What is the Sindoh 3DWOX 1's bed size and build volume?

The Sindoh 3DWOX 1 has a 210 x 200 mm print bed and prints up to 195 mm tall, a build volume of about 210 x 200 x 195 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Sindoh 3DWOX 1 come out?

Sindoh launched the 3DWOX 1 in May 2018.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.