# Renkforce RF100 XL R2: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the Renkforce rf100v2.

- By Renkforce, Germany
- Launched 2019
- Canonical page: https://simplyprint.io/compatibility/renkforce-rf100-xl-r2

## Renkforce RF100 XL R2 at a glance

The Renkforce RF100 XL R2 is a 3D printer by Renkforce with a 200 x 200 x 200 mm build volume.

- Build volume: 200 x 200 x 200 mm
- Max print speed: 300 mm/s
- Prints well: PLA, TPU & flexibles
- Connectivity: USB, SD card

## Connect the Renkforce RF100 XL R2 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through OctoPrint |
| OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | Manual: operated from a computer over USB ('Bedienung über Computer (USB)') with Cura sending G-code over the USB port, or standalone from SD/USB stick. Serial printing like the smaller RF100. ([Source](https://asset.conrad.com/media10/add/160267/c1/-/de/001891634ML01/gebruiksaanwijzing-1891634-renkforce-rf100-xl-v2-3d-printer-incl-filament.pdf)); Expected to work like the Renkforce rf100v2 |
| Klipper (Moonraker) | Not compatible |  | Ships Renkforce's own firmware; Klipper only after you install it. ([Source](https://asset.conrad.com/media10/add/160267/c1/-/de/001891634ML01/gebruiksaanwijzing-1891634-renkforce-rf100-xl-v2-3d-printer-incl-filament.pdf)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on Renkforce RF100 XL R2](https://simplyprint.io/setup-guide/renkforce/rf100-xl-r2.md)
- [How to set up OctoPrint on Renkforce RF100 XL R2](https://simplyprint.io/compatibility/renkforce-rf100-xl-r2/octoprint-setup)

- [Help us confirm](https://simplyprint.io/compatibility/renkforce-rf100-xl-r2/confirm)

### What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Renkforce RF100 XL R2 lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

## What slicer to use for the Renkforce RF100 XL R2

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Renkforce RF100 XL R2, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Renkforce RF100 XL R2 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Renkforce RF100 XL R2 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Renkforce RF100 XL R2 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Renkforce RF100 XL R2 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Renkforce RF100 XL R2 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Renkforce RF100 XL R2 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Renkforce RF100 XL R2 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Renkforce RF100 XL R2.

## The app for the Renkforce RF100 XL R2

SimplyPrint works as the Renkforce RF100 XL R2's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Renkforce RF100 XL R2 to SimplyPrint, free](https://simplyprint.io/setup-guide/renkforce/rf100-xl-r2) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Renkforce RF100 XL R2

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Renkforce RF100 XL R2 specifications: bed size, print height and more

### Size

- Build volume: 200 x 200 x 200 mm
- Bed type: Square
- Bed size: 200 x 200 mm
- Max print height: 200 mm

### Printing

- Max print speed: 300 mm/s
- Max extruder temperature: 260 °C
- Has heated bed: No
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB, SD card
- Prints from: SD card, USB stick
- Supports serial printing: Yes
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Renkforce
- Printer model name: RF100 XL R2
- Made by a company from: Germany
- Launched: 2019

[Read more by the manufacturer](https://web.archive.org/web/20201126062652/https://www.conrad.at/de/p/renkforce-rf100-xl-v2-3d-drucker-inkl-filament-1891634.html)

## What filament can the Renkforce RF100 XL R2 print?

Filament compatibility for the Renkforce RF100 XL R2: the materials Renkforce lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | With care | Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Renkforce RF100 XL R2

Filaments the Renkforce RF100 XL R2 prints well, Renkforce's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab PLA Metal](https://simplyprint.io/filaments/bambu-lab/pla-metal): PLA, 190-230 °C
- [Bambu Lab PLA Silk+](https://simplyprint.io/filaments/bambu-lab/pla-silk-plus): PLA, 210-240 °C
- [Bambu Lab PLA Translucent](https://simplyprint.io/filaments/bambu-lab/pla-translucent): PLA, 200-240 °C

## Compare the Renkforce RF100 XL R2 with similar printers

- [Renkforce RF2000v2](https://simplyprint.io/compatibility/renkforce-rf2000v2): Compatible, 170 x 290 x 185 mm, Also by Renkforce · Similar build volume
- [Renkforce RF1000](https://simplyprint.io/compatibility/renkforce-rf1000): Compatible, 245 x 200 x 230 mm, Also by Renkforce · Similar build volume
- [Voxelab Aquila X2](https://simplyprint.io/compatibility/voxelab-aquila-x2): Compatible, 220 x 220 x 250 mm, Similar build volume
- [Flying Bear Ghost 5](https://simplyprint.io/compatibility/flying-bear-ghost-5): Compatible, 255 x 210 x 210 mm, Similar build volume
- [Compare the Renkforce RF100 XL R2 with other printers](https://simplyprint.io/compatibility/compare?compare=renkforce-rf100-xl-r2#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Renkforce RF100 XL R2 compatible with SimplyPrint?

Most likely. We expect the Renkforce RF100 XL R2 to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the Renkforce RF100 XL R2 to SimplyPrint?

Follow our step-by-step setup guide for the Renkforce RF100 XL R2. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the Renkforce RF100 XL R2?

Cura, PrusaSlicer and OrcaSlicer all work with the Renkforce RF100 XL R2, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Renkforce RF100 XL R2?

Yes, but OrcaSlicer has no built-in profile for the Renkforce RF100 XL R2 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Renkforce RF100 XL R2 print?

Renkforce lists PLA and TPU & flexibles for the RF100 XL R2.

### Does the Renkforce RF100 XL R2 work with OctoPrint or Klipper?

The Renkforce RF100 XL R2 works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Renkforce RF100 XL R2's bed size and build volume?

The Renkforce RF100 XL R2 has a 200 x 200 mm print bed and prints up to 200 mm tall, a build volume of about 200 x 200 x 200 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Renkforce RF100 XL R2 come out?

Renkforce launched the RF100 XL R2 in 2019.

### Can the Renkforce RF100 XL R2 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.