# Renkforce RF100 XL Plus: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the Renkforce rf100v2.

- By Renkforce, Germany
- Launched 2017
- Canonical page: https://simplyprint.io/compatibility/renkforce-rf100-xl-plus

## Renkforce RF100 XL Plus at a glance

The Renkforce RF100 XL Plus is a 3D printer by Renkforce with a 200 x 200 x 200 mm build volume.

- Build volume: 200 x 200 x 200 mm
- Max print speed: 300 mm/s
- Motion system: Other kinematics
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA
- Built-in camera: No
- Connectivity: USB, SD card

## Connect the Renkforce RF100 XL Plus to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through OctoPrint |
| OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | Manual: operated from a computer over USB ('Bedienung über Computer (USB)') with Cura sending G-code over the USB port, or standalone from SD/USB stick. Serial printing like the smaller RF100. ([Source](https://asset.conrad.com/media10/add/160267/c1/-/de/001891634ML01/gebruiksaanwijzing-1891634-renkforce-rf100-xl-v2-3d-printer-incl-filament.pdf)); Expected to work like the Renkforce rf100v2 |
| Klipper (Moonraker) | Not compatible |  | Ships Renkforce's own firmware (V2.1); Klipper only after you install it. ([Source](https://asset.conrad.com/media10/add/160267/c1/-/de/001891634ML01/gebruiksaanwijzing-1891634-renkforce-rf100-xl-v2-3d-printer-incl-filament.pdf)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on Renkforce RF100 XL Plus](https://simplyprint.io/setup-guide/renkforce/rf100-xl-plus.md)
- [How to set up OctoPrint on Renkforce RF100 XL Plus](https://simplyprint.io/compatibility/renkforce-rf100-xl-plus/octoprint-setup)

- [Help us confirm](https://simplyprint.io/compatibility/renkforce-rf100-xl-plus/confirm)

### What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Renkforce RF100 XL Plus lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

## What slicer to use for the Renkforce RF100 XL Plus

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Renkforce RF100 XL Plus, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Renkforce RF100 XL Plus · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Renkforce RF100 XL Plus · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Renkforce RF100 XL Plus · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Renkforce RF100 XL Plus · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Renkforce RF100 XL Plus · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Renkforce RF100 XL Plus · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Renkforce RF100 XL Plus · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Renkforce RF100 XL Plus.

## The app for the Renkforce RF100 XL Plus

SimplyPrint works as the Renkforce RF100 XL Plus's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Renkforce RF100 XL Plus to SimplyPrint, free](https://simplyprint.io/setup-guide/renkforce/rf100-xl-plus) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Renkforce RF100 XL Plus

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Renkforce RF100 XL Plus specifications: bed size, print height and more

### Size

- Build volume: 200 x 200 x 200 mm
- Bed type: Square
- Bed size: 200 x 200 mm
- Max print height: 200 mm

### Printing

- Motion system: Other kinematics
- Max print speed: 300 mm/s
- Max extruder temperature: 260 °C
- Has heated bed: Yes
- Max bed temperature: 120 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB, SD card
- Built-in camera: No
- Prints from: SD card, USB stick
- Supports serial printing: Yes
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Renkforce
- Printer model name: RF100 XL Plus
- Made by a company from: Germany
- Launched: 2017

[Read more by the manufacturer](https://web.archive.org/web/20210119093350/https://www.conrad.at/de/p/renkforce-rf100-xl-plus-3d-drucker-inkl-filament-beheizbares-druckbett-1592461.html)

## What filament can the Renkforce RF100 XL Plus print?

Filament compatibility for the Renkforce RF100 XL Plus: the materials Renkforce lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Renkforce RF100 XL Plus

Filaments the Renkforce RF100 XL Plus prints well, Renkforce's own first, then the best known.

- [Renkforce PETG](https://simplyprint.io/filaments/renkforce/petg): PETG, 230-270 °C
- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C

## Compare the Renkforce RF100 XL Plus with similar printers

- [Creality K1C](https://simplyprint.io/compatibility/creality-k1c): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA
- [Creality Ender-3 V3 KE](https://simplyprint.io/compatibility/creality-ender-3-v3-ke): Compatible, 220 x 220 x 240 mm, Similar build volume · Also prints ABS & ASA
- [Creality K1](https://simplyprint.io/compatibility/creality-k1): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA
- [Prusa MK4S](https://simplyprint.io/compatibility/prusa-mk4s): Compatible, 250 x 210 x 220 mm, Similar build volume · Also prints ABS & ASA
- [Compare the Renkforce RF100 XL Plus with other printers](https://simplyprint.io/compatibility/compare?compare=renkforce-rf100-xl-plus#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Renkforce RF100 XL Plus compatible with SimplyPrint?

Most likely. We expect the Renkforce RF100 XL Plus to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the Renkforce RF100 XL Plus to SimplyPrint?

Follow our step-by-step setup guide for the Renkforce RF100 XL Plus. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the Renkforce RF100 XL Plus?

Cura, PrusaSlicer and OrcaSlicer all work with the Renkforce RF100 XL Plus, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Renkforce RF100 XL Plus?

Yes, but OrcaSlicer has no built-in profile for the Renkforce RF100 XL Plus that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Renkforce RF100 XL Plus print?

Renkforce lists PLA, TPU & flexibles and ABS & ASA for the RF100 XL Plus.

### Does the Renkforce RF100 XL Plus work with OctoPrint or Klipper?

The Renkforce RF100 XL Plus works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Renkforce RF100 XL Plus's bed size and build volume?

The Renkforce RF100 XL Plus has a 200 x 200 mm print bed and prints up to 200 mm tall, a build volume of about 200 x 200 x 200 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Renkforce RF100 XL Plus come out?

Renkforce launched the RF100 XL Plus in 2017.

### Can the Renkforce RF100 XL Plus eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.