# Renkforce Pro 6: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Renkforce, Germany
- Launched 2021
- Canonical page: https://simplyprint.io/compatibility/renkforce-pro-6

## Renkforce Pro 6 at a glance

The Renkforce Pro 6 is a 3D printer by Renkforce with a 200 x 200 x 200 mm build volume.

- Build volume: 200 x 200 x 200 mm
- Enclosure: Fully enclosed
- Max print speed: 100 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled
- Connectivity: USB

## Connect the Renkforce Pro 6 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| Klipper (Moonraker) | Not confirmed yet - help us find out |  | Firmware not named in the manual. ([Source](https://asset.conrad.com/media10/add/160267/c1/-/en/002356116ML01/upute-za-rukovanje-2356116-renkforce-pro-6-3d-pisac.pdf)) |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Manual lists 'USB disk or USB cable' as interfaces and Cura as the slicer, which suggests USB printing, but the firmware is not named and no source shows OctoPrint working. ([Source](https://asset.conrad.com/media10/add/160267/c1/-/en/002356116ML01/upute-za-rukovanje-2356116-renkforce-pro-6-3d-pisac.pdf)) |

- [Help us confirm](https://simplyprint.io/compatibility/renkforce-pro-6/confirm)

## What slicer to use for the Renkforce Pro 6

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Renkforce Pro 6, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Renkforce Pro 6 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Renkforce Pro 6 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Renkforce Pro 6 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Renkforce Pro 6 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Renkforce Pro 6 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Renkforce Pro 6 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Renkforce Pro 6 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Renkforce Pro 6.

## Renkforce Pro 6 specifications: bed size, print height and more

### Size

- Build volume: 200 x 200 x 200 mm
- Bed type: Square
- Bed size: 200 x 200 mm
- Max print height: 200 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 100 mm/s
- Max extruder temperature: 260 °C
- Has heated bed: Yes
- Max bed temperature: 120 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB
- Prints from: USB stick
- Supports serial printing: Yes
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Renkforce
- Printer model name: Pro 6
- Made by a company from: Germany
- Launched: 2021

## What filament can the Renkforce Pro 6 print?

Filament compatibility for the Renkforce Pro 6: the materials Renkforce lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the Renkforce Pro 6 that work with SimplyPrint

- [Creality K1](https://simplyprint.io/compatibility/creality-k1): Compatible, 220 x 220 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Flashforge Adventurer 5M Pro](https://simplyprint.io/compatibility/flashforge-adventurer-5m-pro): Compatible, 220 x 220 x 220 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Snapmaker J1s](https://simplyprint.io/compatibility/snapmaker-j1s): Compatible, 300 x 200 x 200 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)
- [Creality CR-200B](https://simplyprint.io/compatibility/creality-cr-200b): Compatible, 200 x 200 x 200 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA)

## Frequently asked questions

### Is the Renkforce Pro 6 compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Renkforce Pro 6, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Renkforce Pro 6?

Cura, PrusaSlicer and OrcaSlicer all work with the Renkforce Pro 6, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Renkforce Pro 6?

Yes, but OrcaSlicer has no built-in profile for the Renkforce Pro 6 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Renkforce Pro 6 print?

Renkforce lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Carbon-fiber & glass-filled for the Pro 6.

### What is the Renkforce Pro 6's bed size and build volume?

The Renkforce Pro 6 has a 200 x 200 mm print bed and prints up to 200 mm tall, a build volume of about 200 x 200 x 200 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Renkforce Pro 6 come out?

Renkforce launched the Pro 6 in 2021.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.