# re:3D Gigabot 4: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By re:3D, USA
- Launched January 2023
- Canonical page: https://simplyprint.io/compatibility/re-3d-gigabot-4

## re:3D Gigabot 4 at a glance

The re:3D Gigabot 4 is a 3D printer by re:3D with a 590 x 600 x 600 mm build volume.

- Build volume: 590 x 600 x 600 mm
- Enclosure: Partly enclosed
- Max print speed: 60 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Connectivity: Wi-Fi, USB

## Connect the re:3D Gigabot 4 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Compatible |  | Through Klipper (Moonraker) |
| Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships | re:3D's flyer: 'LCD touchscreen with Mainsail for Klipper interface' on a Raspberry Pi with an ArchiMajor board; Mainsail runs on Moonraker. The batch notes say Moonraker is reachable. ([Source](https://re3d.org/wp-content/uploads/2023/04/Gigabot-4-1.pdf)) |
| OctoPrint (Directly, over USB) | Not compatible |  | Ships Klipper; OctoPrint only on top of it. ([Source](https://re3d.org/wp-content/uploads/2023/04/Gigabot-4-1.pdf)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [How to set up SimplyPrint on re:3D Gigabot 4](https://simplyprint.io/setup-guide/re-3d/gigabot-4.md)
- [How to set up Mainsail on re:3D Gigabot 4](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on re:3D Gigabot 4](https://docs.fluidd.xyz/installation)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the re:3D Gigabot 4: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

## What slicer to use for the re:3D Gigabot 4

None of the slicers in SimplyPrint's cloud has a ready-made profile for the re:3D Gigabot 4, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the re:3D Gigabot 4 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the re:3D Gigabot 4 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the re:3D Gigabot 4 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the re:3D Gigabot 4 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the re:3D Gigabot 4 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the re:3D Gigabot 4 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the re:3D Gigabot 4 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the re:3D Gigabot 4.

## The app for the re:3D Gigabot 4

re:3D doesn't make an app for the re:3D Gigabot 4. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the re:3D Gigabot 4 to SimplyPrint, free](https://simplyprint.io/setup-guide/re-3d/gigabot-4) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the re:3D Gigabot 4

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## re:3D Gigabot 4 specifications: bed size, print height and more

### Size

- Build volume: 590 x 600 x 600 mm
- Bed type: Square
- Bed size: 590 x 600 mm
- Max print height: 600 mm

### Printing

- Enclosure: Partly enclosed
- Max print speed: 60 mm/s
- Max extruder temperature: 320 °C
- Has heated bed: Yes
- Max bed temperature: 115 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 2.85 mm

### Multi-material

- Toolchanger or hotend changer: No

### Connecting

- Connectivity: Wi-Fi, USB
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: re:3D
- Printer model name: Gigabot 4
- Made by a company from: USA
- Launched: January 2023
- Still made: Yes

[Read more by the manufacturer](https://re3d.org/gigabot/)

## What filament can the re:3D Gigabot 4 print?

Filament compatibility for the re:3D Gigabot 4: the materials re:3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the re:3D Gigabot 4

Filaments the re:3D Gigabot 4 prints well, re:3D's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C
- [Bambu Lab ASA](https://simplyprint.io/filaments/bambu-lab/asa): ASA, 240-270 °C

## Compare the re:3D Gigabot 4 with similar printers

- [re:3D Terabot 4](https://simplyprint.io/compatibility/re-3d-terabot-4): Compatible, 915 x 915 x 1000 mm, Also by re:3D · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [MINGDA MD-600D](https://simplyprint.io/compatibility/mingda-md-600d): Compatible, 600 x 600 x 600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Tronxy VEHO 600 PRO V3](https://simplyprint.io/compatibility/tronxy-veho-600-pro-v3): Compatible, 600 x 600 x 600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Kentstrapper Bold 755](https://simplyprint.io/compatibility/kentstrapper-bold-755): Compatible, 700 x 500 x 500 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Compare the re:3D Gigabot 4 with other printers](https://simplyprint.io/compatibility/compare?compare=re-3d-gigabot-4#choose)

## Where to buy the re:3D Gigabot 4

- [re:3D's global store](https://simplyprint.io/buy/8353) (Official store)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the re:3D Gigabot 4 compatible with SimplyPrint?

Yes. You can connect the re:3D Gigabot 4 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the re:3D Gigabot 4 to SimplyPrint?

Follow our step-by-step setup guide for the re:3D Gigabot 4. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the re:3D Gigabot 4?

Cura, PrusaSlicer and OrcaSlicer all work with the re:3D Gigabot 4, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the re:3D Gigabot 4?

Yes, but OrcaSlicer has no built-in profile for the re:3D Gigabot 4 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the re:3D Gigabot 4 print?

re:3D lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Polycarbonate (PC) for the Gigabot 4.

### Does the re:3D Gigabot 4 work with OctoPrint or Klipper?

The re:3D Gigabot 4 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the re:3D Gigabot 4's bed size and build volume?

The re:3D Gigabot 4 has a 590 x 600 mm print bed and prints up to 600 mm tall, a build volume of about 590 x 600 x 600 mm. See the full specifications table above for bed type, temperatures and more.

### When did the re:3D Gigabot 4 come out?

re:3D launched the Gigabot 4 in January 2023.

### Can the re:3D Gigabot 4 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

### Where can I buy the re:3D Gigabot 4?

From re:3D's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.