# Raise3D RMF500: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Raise3D, China
- Launched November 2021
- Canonical page: https://simplyprint.io/compatibility/raise3d-rmf500

## Raise3D RMF500 at a glance

The Raise3D RMF500 is a 3D printer by Raise3D with a 500 x 500 x 500 mm build volume.

- Build volume: 500 x 500 x 500 mm
- Enclosure: Fully enclosed
- Max print speed: 500 mm/s
- Motion system: Other kinematics
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Raise3D RMF500 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| Klipper (Moonraker) | Not expected to work |  | Ships Raise3D's own firmware with a 13.3-inch touchscreen, ideaMaker and RaiseCloud; no Klipper or Moonraker. ([Source](https://s1.raise3d.com/2024/08/Raise3D_RMF500-Technical-Specifications_V6.6.pdf)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Network (Ethernet/Wi-Fi) and USB host port only; industrial machine driven by Raise3D's software. Not expected to work. ([Source](https://s1.raise3d.com/2024/08/Raise3D_RMF500-Technical-Specifications_V6.6.pdf)) |

## What slicer to use for the Raise3D RMF500

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D RMF500, and it doesn't take standard G-code that we know of.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Raise3D RMF500 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Raise3D RMF500 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Raise3D RMF500 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Raise3D RMF500 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Raise3D RMF500 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Raise3D RMF500 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Raise3D RMF500 · Runs in the SimplyPrint cloud
- [ideaMaker](https://www.raise3d.com/ideamaker/): Made by Raise3D, not in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D RMF500.

## The app for the Raise3D RMF500

Raise3D's own app is [RaiseCloud](https://www.raise3d.com/academy/raisecloud/).


## Raise3D RMF500 specifications: bed size, print height and more

### Size

- Build volume: 500 x 500 x 500 mm
- Bed type: Square
- Bed size: 500 x 500 mm
- Max print height: 500 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: Other kinematics
- Max print speed: 500 mm/s
- Max extruder temperature: 330 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): Yes

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Raise3D
- Printer model name: RMF500
- Made by a company from: China
- Launched: November 2021
- Still made: Yes

[Read more by the manufacturer](https://www.raise3d.com/rmf500-3d-printer/)

## What filament can the Raise3D RMF500 print?

Filament compatibility for the Raise3D RMF500: the materials Raise3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the Raise3D RMF500 that work with SimplyPrint

- [WASP 4070 HDP](https://simplyprint.io/compatibility/wasp-4070-hdp): Compatible, 400 x 400 x 600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Sovol SV08 Max (Heat Chamber)](https://simplyprint.io/compatibility/sovol-sv08-max-heat-chamber): Compatible, 500 x 500 x 450 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Kentstrapper Bold 755](https://simplyprint.io/compatibility/kentstrapper-bold-755): Compatible, 700 x 500 x 500 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [WASP 4070 FX](https://simplyprint.io/compatibility/wasp-4070-fx): Compatible, 400 x 400 x 700 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Raise3D RMF500

- [Raise3D for the US](https://simplyprint.io/buy/8351) (Official store)

## Frequently asked questions

### Is the Raise3D RMF500 compatible with SimplyPrint?

To our knowledge the Raise3D RMF500 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Raise3D RMF500?

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D RMF500, and it doesn't take standard G-code that we know of.

### What filament can the Raise3D RMF500 print?

Raise3D lists PLA, ABS & ASA, Nylon (PA) and Carbon-fiber & glass-filled for the RMF500.

### What is the Raise3D RMF500's bed size and build volume?

The Raise3D RMF500 has a 500 x 500 mm print bed and prints up to 500 mm tall, a build volume of about 500 x 500 x 500 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Raise3D RMF500 come out?

Raise3D launched the RMF500 in November 2021.

### Where can I buy the Raise3D RMF500?

From Raise3D's own store, which has shops for the US. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.