# Raise3D Pro2 Plus: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Raise3D, China
- Launched April 2018
- Canonical page: https://simplyprint.io/compatibility/raise3d-pro2-plus

## Raise3D Pro2 Plus at a glance

The Raise3D Pro2 Plus is a 3D printer by Raise3D with a 305 x 305 x 605 mm build volume.

- Build volume: 305 x 305 x 605 mm
- Enclosure: Fully enclosed
- Max print speed: 150 mm/s
- Motion system: Other kinematics
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Raise3D Pro2 Plus to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| Klipper (Moonraker) | Not expected to work |  | Ships Raise3D's firmware (ARM Cortex-M7 motion controller + i.MX6 embedded-Linux logic board); no Klipper or Moonraker. ([Source](https://www.farnell.com/datasheets/3970848.pdf)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | Spec sheet lists only USB 2.0 host ports and Ethernet on the logic board; the motion controller is driven internally. The catalog's Pro2 carries a legacy OctoPrint flag, but no source shows OctoPrint working. ([Source](https://www.farnell.com/datasheets/3970848.pdf)) |

## What slicer to use for the Raise3D Pro2 Plus

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D Pro2 Plus, and it doesn't take standard G-code that we know of.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Raise3D Pro2 Plus · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Raise3D Pro2 Plus · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Raise3D Pro2 Plus · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Raise3D Pro2 Plus · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Raise3D Pro2 Plus · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Raise3D Pro2 Plus · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Raise3D Pro2 Plus · Runs in the SimplyPrint cloud
- [ideaMaker](https://www.raise3d.com/ideamaker/): Made by Raise3D, not in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D Pro2 Plus.

## The app for the Raise3D Pro2 Plus

Raise3D's own app is [RaiseCloud](https://www.raise3d.com/academy/raisecloud/).


## Raise3D Pro2 Plus specifications: bed size, print height and more

### Size

- Build volume: 305 x 305 x 605 mm
- Bed type: Square
- Bed size: 305 x 305 mm
- Max print height: 605 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: Other kinematics
- Max print speed: 150 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Raise3D
- Printer model name: Pro2 Plus
- Made by a company from: China
- Launched: April 2018
- Still made: Yes

[Read more by the manufacturer](https://www.raise3d.com/products/raise3d-pro2-plus-3d-printer/)

## What filament can the Raise3D Pro2 Plus print?

Filament compatibility for the Raise3D Pro2 Plus: the materials Raise3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the Raise3D Pro2 Plus that work with SimplyPrint

- [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Creality K2 Plus Combo](https://simplyprint.io/compatibility/creality-k2-plus-combo): Compatible, 350 x 350 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [FLSUN S1](https://simplyprint.io/compatibility/flsun-s1): Compatible, 320 x 320 x 430 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Vivedino Troodon 2.0](https://simplyprint.io/compatibility/vivedino-troodon-2-0): Compatible, 350 x 350 x 320 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the Raise3D Pro2 Plus compatible with SimplyPrint?

To our knowledge the Raise3D Pro2 Plus is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Raise3D Pro2 Plus?

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D Pro2 Plus, and it doesn't take standard G-code that we know of.

### What filament can the Raise3D Pro2 Plus print?

Raise3D lists PLA, PETG, TPU & flexibles, ABS & ASA, Polycarbonate (PC), Nylon (PA) and Carbon-fiber & glass-filled for the Pro2 Plus.

### What is the Raise3D Pro2 Plus's bed size and build volume?

The Raise3D Pro2 Plus has a 305 x 305 mm print bed and prints up to 605 mm tall, a build volume of about 305 x 305 x 605 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Raise3D Pro2 Plus come out?

Raise3D launched the Pro2 Plus in April 2018.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.