# Raise3D N2 Plus: specs, SimplyPrint compatibility and setup

> **Not confirmed yet - help us find out** (We can't tell). We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

- By Raise3D, China
- Launched 2016
- Canonical page: https://simplyprint.io/compatibility/raise3d-n2-plus

## Raise3D N2 Plus at a glance

The Raise3D N2 Plus is a 3D printer by Raise3D with a 305 x 305 x 610 mm build volume.

- Build volume: 305 x 305 x 610 mm
- Enclosure: Fully enclosed
- Max print speed: 150 mm/s
- Motion system: Other kinematics
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: No
- Connectivity: Ethernet, Wi-Fi, USB, SD card

## Connect the Raise3D N2 Plus to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not confirmed yet - help us find out |  |  |
| OctoPrint (Directly, over USB) | Not confirmed yet - help us find out |  | Likely but unconfirmed: Raise3D's published N-series firmware is Marlin on a RUMBA board at 230400 baud, which normally prints over USB serial. No source shows OctoPrint driving an N2 Plus, and later units route through the Raise Touch screen. ([Source](https://github.com/Raise3D/Marlin-Raise3D-N-Series/blob/master/Marlin/Configuration.h)) |
| Klipper (Moonraker) | Not compatible |  | Ships Raise3D's Marlin fork; Klipper only after you install it. ([Source](https://github.com/Raise3D/Marlin-Raise3D-N-Series)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [Help us confirm](https://simplyprint.io/compatibility/raise3d-n2-plus/confirm)

## What slicer to use for the Raise3D N2 Plus

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Raise3D N2 Plus, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Raise3D N2 Plus · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Raise3D N2 Plus · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Raise3D N2 Plus · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Raise3D N2 Plus · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Raise3D N2 Plus · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Raise3D N2 Plus · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Raise3D N2 Plus · Runs in the SimplyPrint cloud
- [ideaMaker](https://www.raise3d.com/ideamaker/): Made by Raise3D, not in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D N2 Plus.

## The app for the Raise3D N2 Plus

Raise3D's own app is [RaiseCloud](https://www.raise3d.com/academy/raisecloud/).


## Raise3D N2 Plus specifications: bed size, print height and more

### Size

- Build volume: 305 x 305 x 610 mm
- Bed type: Square
- Bed size: 305 x 305 mm
- Max print height: 610 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: Other kinematics
- Max print speed: 150 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Connecting

- Connectivity: Ethernet, Wi-Fi, USB, SD card
- Built-in camera: No
- Prints from: USB stick, SD card
- Supports serial printing: Unknown
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Raise3D
- Printer model name: N2 Plus
- Made by a company from: China
- Launched: 2016

[Read more by the manufacturer](https://web.archive.org/web/20180904103603/https://www.raise3d.com/products/raise3d-n2-plus-fff-3d-printer)

## What filament can the Raise3D N2 Plus print?

Filament compatibility for the Raise3D N2 Plus: the materials Raise3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the Raise3D N2 Plus that work with SimplyPrint

- [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Creality K2 Plus Combo](https://simplyprint.io/compatibility/creality-k2-plus-combo): Compatible, 350 x 350 x 350 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [FLSUN S1](https://simplyprint.io/compatibility/flsun-s1): Compatible, 320 x 320 x 430 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Vivedino Troodon 2.0](https://simplyprint.io/compatibility/vivedino-troodon-2-0): Compatible, 350 x 350 x 320 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Frequently asked questions

### Is the Raise3D N2 Plus compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a Raise3D N2 Plus, our compatibility check tells you in a few questions how it could connect.

### What slicer should I use for the Raise3D N2 Plus?

Cura, PrusaSlicer and OrcaSlicer all work with the Raise3D N2 Plus, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Raise3D N2 Plus?

Yes, but OrcaSlicer has no built-in profile for the Raise3D N2 Plus that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Raise3D N2 Plus print?

Raise3D lists PLA, PETG, TPU & flexibles, ABS & ASA, Polycarbonate (PC) and Carbon-fiber & glass-filled for the N2 Plus.

### What is the Raise3D N2 Plus's bed size and build volume?

The Raise3D N2 Plus has a 305 x 305 mm print bed and prints up to 610 mm tall, a build volume of about 305 x 305 x 610 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Raise3D N2 Plus come out?

Raise3D launched the N2 Plus in 2016.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.