# Raise3D E3: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Raise3D, China
- Launched September 2025
- Canonical page: https://simplyprint.io/compatibility/raise3d-e3

## Raise3D E3 at a glance

The E3 is Raise3D's enclosed IDEX printer: two independent extruders, a 330 x 240 x 240 mm volume (295 mm wide in dual mode), a 330 °C hotend and a HEPA filter with activated charcoal. It is for businesses and labs that print flexible and composite materials, or duplicate small parts in mirror and duplication modes.

- Build volume: 330 x 240 x 240 mm
- Enclosure: Fully enclosed
- Max print speed: 200 mm/s
- Motion system: Other kinematics
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Raise3D E3 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| Klipper (Moonraker) | Not expected to work |  | Ships Raise3D's own embedded-Linux firmware (ideaMaker, RaiseCloud, Raise3D API); no Klipper or Moonraker mentioned. ([Source](https://www.raise3d.com/e3/)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | No USB device port for a computer: the USB ports are host ports for flash drives, and the motion controller is driven by Raise3D's embedded-Linux logic board (ideaMaker, RaiseCloud, Raise3D API). Not expected to work as shipped. ([Source](https://www.raise3d.com/e3/)) |

## What slicer to use for the Raise3D E3

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D E3, and it doesn't take standard G-code that we know of.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Raise3D E3 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Raise3D E3 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Raise3D E3 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Raise3D E3 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Raise3D E3 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Raise3D E3 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Raise3D E3 · Runs in the SimplyPrint cloud
- [ideaMaker](https://www.raise3d.com/ideamaker/): Made by Raise3D, not in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D E3.

## The app for the Raise3D E3

Raise3D's own app is [RaiseCloud](https://www.raise3d.com/academy/raisecloud/).


## Raise3D E3 specifications: bed size, print height and more

### Size

- Build volume: 330 x 240 x 240 mm
- Bed type: Square
- Bed size: 330 x 240 mm
- Max print height: 240 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: Other kinematics
- Max print speed: 200 mm/s
- Max extruder temperature: 330 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): Yes

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Raise3D
- Printer model name: E3
- Made by a company from: China
- Launched: September 2025
- Still made: Yes

[Read more by the manufacturer](https://www.raise3d.com/e3/)

## What filament can the Raise3D E3 print?

Filament compatibility for the Raise3D E3: the materials Raise3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

## When to choose the Raise3D E3

Choose the E3 for TPU and composite work from a professional maker: with Raise3D's Flexible Filament Auxiliary Feeder it prints TPU up to 200 mm/s, and an optional composite print head handles PET-CF, PET-GF and PPS-CF. It succeeds the E2 and E2CF and launched at $2,499 in 2025. We found no independent review, and our data rates Klipper and OctoPrint as unlikely for it, so we hold no confirmed way to connect it to SimplyPrint. If you want an enclosed printer that works with SimplyPrint through OctoPrint for less, see the Prusa CORE One+.

### Pros

- Independent dual extruders with mirror, duplication, dual-colour and dual-material modes (Raise3D).
- Fully enclosed, with a HEPA and activated-charcoal filter and a noise level Raise3D gives as under 55 dB(A) (Raise3D).
- Fast TPU printing up to 200 mm/s with the optional auxiliary feeder, and an optional composite head (Raise3D).
- Two desiccant material slots, filament run-out sensors, power-loss recovery and 9-point levelling (Raise3D).
- Wi-Fi, LAN, USB and a live camera (Raise3D).

### Cons

- No confirmed way to connect it to SimplyPrint: Klipper and OctoPrint are rated unlikely in our data.
- Launched at $2,499 (3D Printing Industry), which is a lot for a 330 x 240 x 240 mm printer.
- The optional parts, the auxiliary feeder and composite head, cost extra, and maximum volumetric speed is 16 mm³/s (Raise3D).
- We found no independent review.

### Who it suits

- Schools: Can work. Enclosed, filtered and under 55 dB(A), but the price is high and SimplyPrint can't run it today.
- Hobbyists: Can work. Capable dual-extruder printing for TPU and composites, but expensive for hobby use.
- Businesses: Good fit. A professional enclosed IDEX for flexible and composite parts, though no independent review exists and the SimplyPrint connection is unconfirmed.
- Print farms: Not a good fit. No confirmed SimplyPrint connection and a high price per unit make a fleet a poor fit.

## Printers like the Raise3D E3 that work with SimplyPrint

- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Anycubic Kobra S1](https://simplyprint.io/compatibility/anycubic-kobra-s1): Compatible, 250 x 250 x 250 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Raise3D E3

- [Raise3D for the EU](https://simplyprint.io/buy/8347) (Official store): €1,999.00 (Price at Raise3D, checked October 23, 2026)
- [Raise3D for the US](https://simplyprint.io/buy/8346) (Official store): $2,499.00 (Price at Raise3D, checked October 23, 2026)

## Frequently asked questions

### Is the Raise3D E3 compatible with SimplyPrint?

To our knowledge the Raise3D E3 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Raise3D E3?

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D E3, and it doesn't take standard G-code that we know of.

### What filament can the Raise3D E3 print?

Raise3D lists PLA, PETG, TPU & flexibles, ABS & ASA, Polycarbonate (PC), Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the E3.

### What is the Raise3D E3's bed size and build volume?

The Raise3D E3 has a 330 x 240 mm print bed and prints up to 240 mm tall, a build volume of about 330 x 240 x 240 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Raise3D E3 come out?

Raise3D launched the E3 in September 2025.

### Where can I buy the Raise3D E3?

From Raise3D's own store, which has shops for the EU and the US. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.