# Raise3D E2CF: specs, SimplyPrint compatibility and setup

> **Not expected to work** (Most likely not). We don't expect it to work, but we could be wrong.

- By Raise3D, China
- Launched August 2021
- Canonical page: https://simplyprint.io/compatibility/raise3d-e2cf

## Raise3D E2CF at a glance

The Raise3D E2CF is a 3D printer by Raise3D with a 330 x 240 x 240 mm build volume.

- Build volume: 330 x 240 x 240 mm
- Enclosure: Fully enclosed
- Max print speed: 150 mm/s
- Motion system: Other kinematics
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the Raise3D E2CF to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Not expected to work |  |  |
| Klipper (Moonraker) | Not expected to work |  | Ships Raise3D's RepRapFirmware-based motion firmware under its own embedded-Linux UI; no Klipper or Moonraker. ([Source](https://github.com/Raise3D/Reprap-Raise3D-E2-Series)) |
| OctoPrint (Directly, over USB) | Not expected to work |  | No USB device port for a computer: the USB ports are host ports for flash drives, and the motion controller is driven by Raise3D's embedded-Linux logic board (ideaMaker, RaiseCloud, Raise3D API). Not expected to work as shipped. ([Source](https://www.raise3d.com/e2cf/)) |

## What slicer to use for the Raise3D E2CF

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D E2CF, and it doesn't take standard G-code that we know of.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Raise3D E2CF · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Raise3D E2CF · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Raise3D E2CF · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Raise3D E2CF · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Raise3D E2CF · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Raise3D E2CF · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Raise3D E2CF · Runs in the SimplyPrint cloud
- [ideaMaker](https://www.raise3d.com/ideamaker/): Made by Raise3D, not in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D E2CF.

## The app for the Raise3D E2CF

Raise3D's own app is [RaiseCloud](https://www.raise3d.com/academy/raisecloud/).


## Raise3D E2CF specifications: bed size, print height and more

### Size

- Build volume: 330 x 240 x 240 mm
- Bed type: Square
- Bed size: 330 x 240 mm
- Max print height: 240 mm

### Printing

- Enclosure: Fully enclosed
- Motion system: Other kinematics
- Max print speed: 150 mm/s
- Max extruder temperature: 330 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): Yes

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: Unknown
- Shipped firmware: The maker's own

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Raise3D
- Printer model name: E2CF
- Made by a company from: China
- Launched: August 2021

[Read more by the manufacturer](https://www.raise3d.com/e2cf/)

## What filament can the Raise3D E2CF print?

Filament compatibility for the Raise3D E2CF: the materials Raise3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

## Printers like the Raise3D E2CF that work with SimplyPrint

- [Bambu Lab P1S](https://simplyprint.io/compatibility/bambu-lab-p1s): Verified by SimplyPrint, 256 x 256 x 256 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Creality K1 Max](https://simplyprint.io/compatibility/creality-k1-max): Compatible, 300 x 300 x 300 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Creality CR-5 Pro H](https://simplyprint.io/compatibility/creality-cr-5-pro-h): Compatible, 300 x 225 x 380 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [QIDI X-Plus 3](https://simplyprint.io/compatibility/qidi-x-plus-3): Compatible, 280 x 280 x 270 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)

## Where to buy the Raise3D E2CF

- [Raise3D for the US](https://simplyprint.io/buy/8345) (Official store): $2,499.00 (Price at Raise3D, checked October 23, 2026)

## Frequently asked questions

### Is the Raise3D E2CF compatible with SimplyPrint?

To our knowledge the Raise3D E2CF is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

### What slicer should I use for the Raise3D E2CF?

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D E2CF, and it doesn't take standard G-code that we know of.

### What filament can the Raise3D E2CF print?

Raise3D lists PLA, PETG, ABS & ASA, Polycarbonate (PC), Nylon (PA) and Carbon-fiber & glass-filled for the E2CF.

### What is the Raise3D E2CF's bed size and build volume?

The Raise3D E2CF has a 330 x 240 mm print bed and prints up to 240 mm tall, a build volume of about 330 x 240 x 240 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Raise3D E2CF come out?

Raise3D launched the E2CF in August 2021.

### Where can I buy the Raise3D E2CF?

From Raise3D's own store, which has shops for the US. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.