# Prusa CORE One L+ INDX: specs, SimplyPrint compatibility and setup > **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the Prusa CORE One+ INDX. - By Prusa, Czechia - Launched August 27, 2026 - Canonical page: https://simplyprint.io/compatibility/prusa-core-one-l-plus-indx ## Prusa CORE One L+ INDX at a glance The CORE One L+ INDX is Prusa's large enclosed CoreXY with a Bondtech INDX toolchanger: up to eight tools, a 298 x 275 x 330 mm volume, a 60 °C chamber and a 300 °C hotend. It is for makers and businesses who want multi-colour and multi-material parts without the purge waste of a single-nozzle system. - Build volume: 298 x 275 x 330 mm - Enclosure: Fully enclosed - Motion system: CoreXY - Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) - Built-in camera: Yes - Connectivity: Wi-Fi, Ethernet, USB ## Connect the Prusa CORE One L+ INDX to SimplyPrint | Way of connecting | Status | What you need | Notes | | :--- | :--- | :--- | :--- | | SimplyPrint Client | Expected to work | A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client | PrusaLink is built into Prusa's Buddy firmware, which the SimplyPrint Client connects to, as on the CORE One+ INDX. How the Client handles up to eight tools isn't confirmed yet. ([Source](https://www.prusa3d.com/product/prusa-core-one-l-indx-8-tool/)); Expected to work like the Prusa CORE One+ INDX | | OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | The CORE One+ INDX runs the same firmware family and is expected to print over USB from OctoPrint. Prusa doesn't document tool changes over USB yet. ([Source](https://www.prusa3d.com/product/prusa-core-one-l-indx-8-tool/)); Expected to work like the Prusa CORE One+ INDX | | Prusa direct firmware | Expected to work | The SimplyPrint firmware for Prusa printers, in beta, installed on the printer | Runs Prusa's Buddy firmware on xBuddy electronics like the CORE One+ INDX, which SimplyPrint's Prusa firmware (beta) supports. Not confirmed on this printer yet. ([Source](https://simplyprint.io/setup-guide/methods/prusa-direct)); Expected to work like the Prusa CORE One+ INDX | | Klipper (Moonraker) | Not expected to work | | Ships Prusa's own firmware (Buddy, based on Marlin). There is no Klipper for the CORE One L or the INDX. ([Source](https://www.prusa3d.com/product/prusa-core-one-l-indx-8-tool/)) | - [How to set up SimplyPrint on Prusa CORE One L+ INDX](https://simplyprint.io/setup-guide/prusa/core-one-l-plus-indx.md) - [How to set up OctoPrint on Prusa CORE One L+ INDX](https://simplyprint.io/compatibility/prusa-core-one-l-plus-indx/octoprint-setup) - [Help us confirm](https://simplyprint.io/compatibility/prusa-core-one-l-plus-indx/confirm) ### What works with SimplyPrint Connected through OctoPrint, SimplyPrint is expected to support most of what it offers on the Prusa CORE One L+ INDX: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. Not available through OctoPrint: sync loaded filament from the multi-material unit. 3 features depend on how it's set up: the table says what each needs. ## What slicer to use for the Prusa CORE One L+ INDX Prusa printers use PrusaSlicer, Prusa's own slicer. There's no ready-made profile for the Prusa CORE One L+ INDX in our cloud yet. - [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No ready-made profile for the Prusa CORE One L+ INDX yet · Prusa's own slicer · Runs in the SimplyPrint cloud - [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Prusa CORE One L+ INDX · Runs in the SimplyPrint cloud - [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Prusa CORE One L+ INDX · Runs in the SimplyPrint cloud - [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Prusa CORE One L+ INDX · Runs in the SimplyPrint cloud - [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Prusa CORE One L+ INDX · Runs in the SimplyPrint cloud - [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Prusa CORE One L+ INDX · Runs in the SimplyPrint cloud - [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Prusa CORE One L+ INDX · Runs in the SimplyPrint cloud We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Prusa CORE One L+ INDX. ## The app for the Prusa CORE One L+ INDX Use SimplyPrint as the app for your Prusa CORE One L+ INDX: watch and run it from your phone or any browser, slice in the cloud, and keep it next to your other printers. It's free to start. Prusa's own apps are Prusa app and Prusa Connect. - Printers from other brands: SimplyPrint yes; Prusa app and Prusa Connect: Only Prusa Research printers - Works without Prusa Research's cloud: SimplyPrint yes; Prusa app and Prusa Connect: Only through Prusa Research's cloud - An app for iPhone and Android, the same in any browser, and a slicer in the cloud. - More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team. - Hosted in Frankfurt, Germany, under the GDPR. [Connect the Prusa CORE One L+ INDX to SimplyPrint, free](https://simplyprint.io/setup-guide/prusa/core-one-l-plus-indx) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev) [SimplyPrint's print farm software for Prusa](https://simplyprint.io/print-farms/prusa) ## Automate the Prusa CORE One L+ INDX **Enclosed printers push their prints out.** The Prusa CORE One L+ INDX's bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first. ### Ways to automate it - [Push prints off with the toolhead](https://simplyprint.io/features/autoprint/push-off): On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts. - [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print. - [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system. - [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job. [How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up. ## Prusa CORE One L+ INDX specifications: bed size, print height and more ### Size - Build volume: 298 x 275 x 330 mm - Bed type: Rectangle - Bed size: 298 x 275 mm - Max print height: 330 mm ### Printing - Enclosure: Fully enclosed - Motion system: CoreXY - Max extruder temperature: 300 °C - Has heated bed: Yes - Max bed temperature: 120 °C - Heated chamber: Up to 60 °C - Number of nozzles: 8 - Toolheads: 8 - Direct drive: Yes - Probing tool / Auto Bed Leveling: Yes - Filament width: 1.75 mm ### Multi-material - Toolchanger or hotend changer: Yes - IDEX (independent dual extruders): No ### Connecting - Connectivity: Wi-Fi, Ethernet, USB - Built-in camera: Yes - Prints from: USB stick - Supports serial printing: Unknown - Shipped firmware: Marlin ### Files and slicing - Supported file formats: G-code (.gcode, .gco, .g) ### The printer - Printer manufacturer / brand: Prusa - Printer model name: CORE One L+ INDX - Made by a company from: Czechia - Launched: August 27, 2026 - Still made: Yes [Read more by the manufacturer](https://www.prusa3d.com/product/prusa-core-one-l-indx-8-tool/) ## What filament can the Prusa CORE One L+ INDX print? Filament compatibility for the Prusa CORE One L+ INDX: the materials Prusa lists for it. | Filament | Suitability | Notes | | :--- | :--- | :--- | | PLA | Great | On the maker's list of materials for this printer. | | PETG | Great | On the maker's list of materials for this printer. | | TPU & flexibles | Great | On the maker's list of materials for this printer. | | ABS & ASA | Great | On the maker's list of materials for this printer. | | Nylon (PA) | Great | On the maker's list of materials for this printer. | | Polycarbonate (PC) | Great | On the maker's list of materials for this printer. | | Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. | ### Best filament for the Prusa CORE One L+ INDX Filaments the Prusa CORE One L+ INDX prints well, Prusa's own first, then the best known. - [Prusament ASA](https://simplyprint.io/filaments/prusament/asa): ASA, 250-270 °C - [Prusament PC Blend](https://simplyprint.io/filaments/prusament/pc-blend): PC, 2-280 °C - [Prusament PETG V0](https://simplyprint.io/filaments/prusament/petg-v0): PETG, 2-2 °C - [Prusament PLA](https://simplyprint.io/filaments/prusament/pla): PLA, 205-225 °C - [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C - [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C - [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C - [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C ## When to choose the Prusa CORE One L+ INDX Choose the INDX when you want multi-material on a large enclosed machine: Prusa says a tool change takes about 12 seconds and wastes about 0.013 g, and each tool keeps its own nozzle, so TPU and rigid filaments can mix. It is new, ships only assembled, and Prusa's page listed it at €2,779 with estimated delivery after 18 January 2027. The independent reviews Prusa shows are of the CORE One L, not the INDX. If you print one material, the CORE One L+ costs less; for an even larger plate with five toolheads, look at the XL+. ### Pros - Up to eight tools, each with its own nozzle, so colour changes waste almost no filament: Prusa says about 0.013 g per change (Prusa). - Tool changes in about 12 seconds, against about 42 for single-nozzle systems, with automatic tool-offset calibration (Prusa). - An enclosed 60 °C chamber and a 300 °C hotend for ASA, PC and nylon (Prusa). - Works with any 1.75 mm filament, and a 1080p camera comes in the box (Prusa). - Expected to work with SimplyPrint through the SimplyPrint Client, OctoPrint or Prusa Direct (not yet confirmed). ### Cons - Listed at €2,779 (€2,223.20 without VAT) for the 8-tool printer, with delivery estimated after 18 January 2027 (Prusa). - No independent review of the INDX yet: the reviews on Prusa's page are of the CORE One L. - The dock reduces the build volume to 298 x 275 x 330 mm from the L+'s 300 x 300 x 330 mm (Prusa). - Sold fully assembled only, with no kit, and SimplyPrint compatibility is expected rather than confirmed. ### Who it suits - Schools: Can work. Enclosed and easy to run, and SimplyPrint can queue student prints for approval, but eight tools and the price are more than a classroom needs. - Hobbyists: Good fit. Low-waste multi-colour on a large enclosed machine, at a premium price. - Businesses: Good fit. Multi-material functional parts with TPU and rigid filaments mixed, though it is new and untested by independent reviewers. - Print farms: Can work. Low waste per colour print, but it is new, has no plate-clearing kit in our sources and its SimplyPrint connection is not confirmed. ## Compare the Prusa CORE One L+ INDX with similar printers - [Prusa CORE One L](https://simplyprint.io/compatibility/prusa-core-one-l): Compatible, 300 x 300 x 330 mm, Also by Prusa · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Prusa Pro HT90](https://simplyprint.io/compatibility/prusa-pro-ht90): Compatible, 300 x 300 x 400 mm, Also by Prusa · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Bambu Lab H2S Combo](https://simplyprint.io/compatibility/bambu-lab-h2s-combo): Verified by SimplyPrint, 340 x 320 x 340 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Bambu Lab H2D Combo](https://simplyprint.io/compatibility/bambu-lab-h2d-combo): Verified by SimplyPrint, 325 x 320 x 325 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) - [Compare the Prusa CORE One L+ INDX with other printers](https://simplyprint.io/compatibility/compare?compare=prusa-core-one-l-plus-indx#choose) ## Where to buy the Prusa CORE One L+ INDX - [Prusa's global store](https://simplyprint.io/buy/8336) (Official store) (Affiliate link) ## About Prusa Prusa Research is a Prague company founded in 2012 by Josef Průša, who came from the open-source RepRap project. It designs and builds the Original Prusa and Prusa CORE printers, makes Prusament filament, develops the PrusaSlicer slicer and runs the Printables model site. Printers are built in Prague and at its US site in Delaware, sold assembled or as kits, and used by hobbyists, schools, businesses and print farms. - Founded: 2012 - Headquarters: Prague, Czech Republic - Ownership: Prusa Research a.s., founded and led by Josef Průša - People: More than 1,200 people (company site, 2026) - Website: https://www.prusa3d.com Openness: Open (4.9 of 5) Prusa is the most open of the large brands: GPL firmware, an open slicer, full local control without an account and spare parts for everything. Hardware design files now come under Prusa's own Open Community License, which allows personal and in-house business use but not selling machines. - Firmware and custom firmware (5 of 5): Firmware for current printers is published on GitHub under GPL-3.0 and updated with every release. Official firmware is signed, but Prusa documents how to flash custom firmware by breaking a seal on the board and says this does not void the warranty. Prusa says firmware and printable parts are shared right away and electronics schematics later. - Local control and integrations (5 of 5): PrusaLink, built into the CORE One, MK4S, MK3.9, MK3.5 and XL, handles monitoring, file uploads and print control on the local network without internet or an account, and printing from USB works offline. Prusa publishes PrusaLink's HTTP API as an OpenAPI specification on GitHub, and its help centre covers OctoPrint setup. Prusa Connect is an optional cloud service for remote access. - Third-party filament, slicers and parts (5 of 5): Printers are open to any filament; PrusaSlicer is GPL-licensed and other slicers work. Instead of a locked RFID system, Prusa created OpenPrintTag, an NFC spool-tag standard that is free for any brand to use and works offline. - Repairs and spare parts (5 of 5): The e-shop sells spare parts for each printer, printable parts are published, and the full CORE One CAD files are released. Prusa's open-source page says its goal is printers that stay moddable and easy to repair for decades, and its licence explicitly allows making spare parts for your own machines. - Data and privacy (4 of 5): No account is needed for local use through PrusaLink or USB. Prusa Connect needs a Prusa account and stores G-codes and telemetry in the cloud. Prusa Research is an EU company and publishes its privacy policy and a Trust Center. - Community and documentation (5 of 5): Large community around Printables and the forum, a detailed knowledge base, and firmware and slicer developed in public on GitHub with open issue trackers. ### Pros - GPL firmware with a documented, warranty-safe way to flash custom firmware. - Full control on the local network through PrusaLink, with no account needed. - Spare parts for every printer, published printable parts and released CAD files. - Kits available for people who want to build and understand their printer. - Made in Prague, with a second factory in Delaware for US buyers. - OpenPrintTag is an open spool-tag standard any brand can use. ### Cons - Hardware files use Prusa's own OCL licence, which bars selling machines built from them; it is not an OSI open-source licence. - Electronics schematics are published later than firmware and printable parts. - Remote access and cloud storage need Prusa Connect and an account. ### Track record - July 2026: Printed Solid, the Delaware company Prusa Research bought in 2022, was renamed Prusa USA. Its Wilmington site builds the MK4S and CORE One+, makes filament and is Prusa's US service centre. - December 2025: Prusa released the full CAD files of the CORE One under its new Open Community License (OCL). OCL allows modifying, sharing mods and in-house commercial use, and grants patent and repair rights, but bars selling machines built from the files without an agreement, so it is not a standard open-source licence. Prusa said it is also filing patents on its designs. - October 2025: Prusa launched OpenPrintTag, a published NFC standard for smart filament spools that any brand can use without licence fees, starting with redesigned Prusament spools. - November 2024: Prusa announced the CORE One, its first fully enclosed CoreXY printer with active chamber temperature control. - March 2023: Josef Průša wrote that open source in 3D printing was under strain from cloners and licence violations. With the MK4, Prusa released firmware sources and models of the plastic parts but held back the electronics plans, planning to publish them later under a new licence. How Prusa compares with every other brand: https://simplyprint.io/articles/best-3d-printer Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. ## Frequently asked questions ### Is the Prusa CORE One L+ INDX compatible with SimplyPrint? Most likely. We expect the Prusa CORE One L+ INDX to connect to SimplyPrint via SimplyPrint Client, OctoPrint, or Prusa direct firmware, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone. ### How do I connect the Prusa CORE One L+ INDX to SimplyPrint? Follow our step-by-step setup guide for the Prusa CORE One L+ INDX. It shows how to connect it via SimplyPrint Client, OctoPrint, or Prusa direct firmware, what you need for each, and which to pick. ### What slicer should I use for the Prusa CORE One L+ INDX? Use PrusaSlicer, Prusa's own slicer, made for its printers. You can run it in SimplyPrint's online slicer; there's no ready-made profile for the Prusa CORE One L+ INDX in it yet. ### Can I use OrcaSlicer with the Prusa CORE One L+ INDX? Yes, but OrcaSlicer has no built-in profile for the Prusa CORE One L+ INDX that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match. ### What filament can the Prusa CORE One L+ INDX print? Prusa lists PLA, PETG, ABS & ASA, TPU & flexibles, Polycarbonate (PC) and Nylon (PA) for the CORE One L+ INDX. ### Does the Prusa CORE One L+ INDX work with OctoPrint or Klipper? The Prusa CORE One L+ INDX works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top. ### What is the Prusa CORE One L+ INDX's bed size and build volume? The Prusa CORE One L+ INDX has a 298 x 275 mm print bed and prints up to 330 mm tall, a build volume of about 298 x 275 x 330 mm. See the full specifications table above for bed type, temperatures and more. ### When did the Prusa CORE One L+ INDX come out? Prusa launched the CORE One L+ INDX on August 27, 2026. ### Can the Prusa CORE One L+ INDX eject prints automatically? There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue. ### Where can I buy the Prusa CORE One L+ INDX? From Prusa's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you. --- © 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.