# MSzturc THE 100: specs, SimplyPrint compatibility and setup

> **Compatible** (We're sure). It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

- By MSzturc
- Launched March 2023
- Canonical page: https://simplyprint.io/compatibility/mszturc-the-100

## MSzturc THE 100 at a glance

The MSzturc THE 100 is a 3D printer by MSzturc with a 165 x 165 x 150 mm build volume.

- Build volume: 165 x 165 x 150 mm
- Enclosure: Open frame
- Max print speed: 400 mm/s
- Motion system: CoreXY
- Prints well: PLA, PETG
- Connectivity: Wi-Fi, USB

## Connect the MSzturc THE 100 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Compatible |  | Through Klipper (Moonraker) |
| Klipper (Moonraker) | Compatible | Nothing extra: the printer runs Klipper as it ships | DIY design built to run Klipper: the project's Klipper folder has the printer.cfg plus moonraker.conf and Mainsail/Fluidd configs (Klipper 0.11, Moonraker, Mainsail on a BTT SKR Pico). ([Source](https://github.com/MSzturc/the100/tree/main/Klipper)) |
| OctoPrint (Directly, over USB) | Not compatible |  | Built as a Klipper printer; OctoPrint only runs on top of Klipper. ([Source](https://github.com/MSzturc/the100/tree/main/Klipper)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [How to set up SimplyPrint on MSzturc THE 100](https://simplyprint.io/setup-guide/mszturc/the-100.md)
- [How to set up Mainsail on MSzturc THE 100](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on MSzturc THE 100](https://docs.fluidd.xyz/installation)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the MSzturc THE 100: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

## What slicer to use for the MSzturc THE 100

None of the slicers in SimplyPrint's cloud has a ready-made profile for the MSzturc THE 100, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the MSzturc THE 100 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the MSzturc THE 100 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the MSzturc THE 100 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the MSzturc THE 100 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the MSzturc THE 100 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the MSzturc THE 100 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the MSzturc THE 100 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the MSzturc THE 100.

## The app for the MSzturc THE 100

SimplyPrint works as the MSzturc THE 100's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the MSzturc THE 100 to SimplyPrint, free](https://simplyprint.io/setup-guide/mszturc/the-100) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the MSzturc THE 100

**CoreXY printers push their prints off.** The MSzturc THE 100's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.

### Ways to automate it

- [Push prints off with the toolhead](https://simplyprint.io/features/autoprint/push-off): On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## MSzturc THE 100 specifications: bed size, print height and more

### Size

- Build volume: 165 x 165 x 150 mm
- Bed type: Square
- Bed size: 165 x 165 mm
- Max print height: 150 mm

### Printing

- Enclosure: Open frame
- Motion system: CoreXY
- Max print speed: 400 mm/s
- Max extruder temperature: 300 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: No
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, USB
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: MSzturc
- Printer model name: THE 100
- Launched: March 2023

[Read more by the manufacturer](https://github.com/MSzturc/the100)

## What filament can the MSzturc THE 100 print?

Filament compatibility for the MSzturc THE 100: the materials MSzturc lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the MSzturc THE 100

Filaments the MSzturc THE 100 prints well, MSzturc's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-260 °C
- [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-260 °C

## Compare the MSzturc THE 100 with similar printers

- [Bambu Lab A1 Mini](https://simplyprint.io/compatibility/bambu-lab-a1-mini): Verified by SimplyPrint, 180 x 180 x 180 mm, Similar build volume
- [Kingroon KP3S](https://simplyprint.io/compatibility/kingroon-kp3s): Compatible, 180 x 180 x 180 mm, Similar build volume
- [Creality Ender-2 Pro](https://simplyprint.io/compatibility/creality-ender-2-pro): Compatible, 165 x 165 x 180 mm, Similar build volume
- [LulzBot TAZ SideKick 289](https://simplyprint.io/compatibility/lulzbot-taz-sidekick-289): Compatible, 162 x 162 x 181 mm, Similar build volume
- [Compare the MSzturc THE 100 with other printers](https://simplyprint.io/compatibility/compare?compare=mszturc-the-100#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the MSzturc THE 100 compatible with SimplyPrint?

Yes. You can connect the MSzturc THE 100 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.

### How do I connect the MSzturc THE 100 to SimplyPrint?

Follow our step-by-step setup guide for the MSzturc THE 100. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the MSzturc THE 100?

Cura, PrusaSlicer and OrcaSlicer all work with the MSzturc THE 100, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the MSzturc THE 100?

Yes, but OrcaSlicer has no built-in profile for the MSzturc THE 100 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the MSzturc THE 100 print?

MSzturc lists PLA and PETG for the THE 100.

### Does the MSzturc THE 100 work with OctoPrint or Klipper?

The MSzturc THE 100 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the MSzturc THE 100's bed size and build volume?

The MSzturc THE 100 has a 165 x 165 mm print bed and prints up to 150 mm tall, a build volume of about 165 x 165 x 150 mm. See the full specifications table above for bed type, temperatures and more.

### When did the MSzturc THE 100 come out?

MSzturc launched the THE 100 in March 2023.

### Can the MSzturc THE 100 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.