# Monoprice MP Cadet: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the WEEDO Tina2.

- By Monoprice, USA
- Launched 2020
- Canonical page: https://simplyprint.io/compatibility/monoprice-mp-cadet

## Monoprice MP Cadet at a glance

The Monoprice MP Cadet is a 3D printer by Monoprice with a 100 x 100 x 105 mm build volume.

- Build volume: 100 x 100 x 105 mm
- Enclosure: Open frame
- Max print speed: 150 mm/s
- Prints well: PLA, PETG
- Connectivity: Wi-Fi, USB, SD card

## Connect the Monoprice MP Cadet to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through OctoPrint |
| OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | A rebadged Weedo Tina2 that ships with a USB cable; expected to print over USB like the Tina2. ([Source](https://www.windowscentral.com/monoprice-cadet-3d-printer-review-smallest-jobs)); Expected to work like the WEEDO Tina2 |
| Klipper (Moonraker) | Not compatible |  | Ships Weedo's Marlin-based firmware, like the Tina2. Klipper only if you install it yourself. ([Source](https://www.windowscentral.com/monoprice-cadet-3d-printer-review-smallest-jobs)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on Monoprice MP Cadet](https://simplyprint.io/setup-guide/monoprice/mp-cadet.md)
- [How to set up OctoPrint on Monoprice MP Cadet](https://simplyprint.io/compatibility/monoprice-mp-cadet/octoprint-setup)

- [Help us confirm](https://simplyprint.io/compatibility/monoprice-mp-cadet/confirm)

### What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Monoprice MP Cadet lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

## What slicer to use for the Monoprice MP Cadet

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Monoprice MP Cadet, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Monoprice MP Cadet · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Monoprice MP Cadet · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Monoprice MP Cadet · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Monoprice MP Cadet · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Monoprice MP Cadet · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Monoprice MP Cadet · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Monoprice MP Cadet · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Monoprice MP Cadet.

## The app for the Monoprice MP Cadet

SimplyPrint works as the Monoprice MP Cadet's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Monoprice MP Cadet to SimplyPrint, free](https://simplyprint.io/setup-guide/monoprice/mp-cadet) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Monoprice MP Cadet

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Monoprice MP Cadet specifications: bed size, print height and more

### Size

- Build volume: 100 x 100 x 105 mm
- Bed type: Square
- Bed size: 100 x 100 mm
- Max print height: 105 mm

### Printing

- Enclosure: Open frame
- Max print speed: 150 mm/s
- Max extruder temperature: 250 °C
- Has heated bed: Yes
- Max bed temperature: 50 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, USB, SD card
- Prints from: microSD card
- Supports serial printing: Unknown
- Shipped firmware: Unknown

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Monoprice
- Printer model name: MP Cadet
- Made by a company from: USA
- Launched: 2020

[Read more by the manufacturer](https://web.archive.org/web/2022/https://www.monoprice.com/product?p_id=40108)

## What filament can the Monoprice MP Cadet print?

Filament compatibility for the Monoprice MP Cadet: the materials Monoprice lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Good | Printable - aim for a bed around 70-80C for the best adhesion. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Not ideal | Not recommended - the bed cannot reach the ~90-110C ABS and ASA need. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Monoprice MP Cadet

Filaments the Monoprice MP Cadet prints well, Monoprice's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab PETG Basic](https://simplyprint.io/filaments/bambu-lab/petg-basic): PETG, 230-260 °C
- [Bambu Lab PETG HF](https://simplyprint.io/filaments/bambu-lab/petg-hf): PETG, 230-260 °C

## Compare the Monoprice MP Cadet with similar printers

- [Monoprice Delta Mini V2](https://simplyprint.io/compatibility/monoprice-delta-mini-v2): Compatible, 110 x 110 x 120 mm, Also by Monoprice · Similar build volume
- [Monoprice MP Mini Select](https://simplyprint.io/compatibility/monoprice-mp-mini-select): Compatible, 120 x 120 x 120 mm, Also by Monoprice
- [Easythreed K7](https://simplyprint.io/compatibility/easythreed-k7): Compatible, 100 x 100 x 100 mm, Similar build volume
- [WEEDO Tina2](https://simplyprint.io/compatibility/weedo-tina2): Compatible, 100 x 100 x 100 mm, Similar build volume
- [Compare the Monoprice MP Cadet with other printers](https://simplyprint.io/compatibility/compare?compare=monoprice-mp-cadet#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Monoprice MP Cadet compatible with SimplyPrint?

Most likely. We expect the Monoprice MP Cadet to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the Monoprice MP Cadet to SimplyPrint?

Follow our step-by-step setup guide for the Monoprice MP Cadet. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the Monoprice MP Cadet?

Cura, PrusaSlicer and OrcaSlicer all work with the Monoprice MP Cadet, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Monoprice MP Cadet?

Yes, but OrcaSlicer has no built-in profile for the Monoprice MP Cadet that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Monoprice MP Cadet print?

Monoprice lists PLA for the MP Cadet.

### Does the Monoprice MP Cadet work with OctoPrint or Klipper?

The Monoprice MP Cadet works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Monoprice MP Cadet's bed size and build volume?

The Monoprice MP Cadet has a 100 x 100 mm print bed and prints up to 105 mm tall, a build volume of about 100 x 100 x 105 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Monoprice MP Cadet come out?

Monoprice launched the MP Cadet in 2020.

### Can the Monoprice MP Cadet eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.