# MINGDA Raptor 450: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the MINGDA MD-400D.

- By MINGDA, China
- Launched 2026
- Canonical page: https://simplyprint.io/compatibility/mingda-raptor-450

## MINGDA Raptor 450 at a glance

The Raptor 450 is Mingda's compact high-temperature IDEX printer: independent dual extruders, a 450 x 450 x 500 mm build volume, a 120 °C heated chamber and a 500 °C hotend. It is for industrial users printing PEEK, PC, nylon and carbon-filled engineering materials.

- Build volume: 450 x 450 x 500 mm
- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the MINGDA Raptor 450 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through Klipper (Moonraker) |
| Klipper (Moonraker) | Expected to work | Nothing extra: the printer runs Klipper as it ships | Spec table says Klipper firmware with Wi-Fi/Ethernet remote printing, the same MINGDA Klipper platform as the mingda-md-400d, which ships Moonraker. ([Source](https://www.3dmingda.com/raptor-450)); Expected to work like the MINGDA MD-400D |
| OctoPrint (Directly, over USB) | Not compatible |  | Ships Klipper; OctoPrint only runs on top of it. ([Source](https://www.3dmingda.com/raptor-450)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [How to set up SimplyPrint on MINGDA Raptor 450](https://simplyprint.io/setup-guide/mingda/raptor-450.md)
- [How to set up Mainsail on MINGDA Raptor 450](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on MINGDA Raptor 450](https://docs.fluidd.xyz/installation)

- [Help us confirm](https://simplyprint.io/compatibility/mingda-raptor-450/confirm)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint is expected to support most of what it offers on the MINGDA Raptor 450: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

## What slicer to use for the MINGDA Raptor 450

None of the slicers in SimplyPrint's cloud has a ready-made profile for the MINGDA Raptor 450, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the MINGDA Raptor 450 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the MINGDA Raptor 450 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the MINGDA Raptor 450 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the MINGDA Raptor 450 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the MINGDA Raptor 450 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the MINGDA Raptor 450 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the MINGDA Raptor 450 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the MINGDA Raptor 450.

## The app for the MINGDA Raptor 450

SimplyPrint works as the MINGDA Raptor 450's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the MINGDA Raptor 450 to SimplyPrint, free](https://simplyprint.io/setup-guide/mingda/raptor-450) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the MINGDA Raptor 450

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## MINGDA Raptor 450 specifications: bed size, print height and more

### Size

- Build volume: 450 x 450 x 500 mm
- Bed type: Square
- Bed size: 450 x 450 mm
- Max print height: 500 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Max extruder temperature: 500 °C
- Has heated bed: Yes
- Max bed temperature: 130 °C
- Heated chamber: Up to 120 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): Yes

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: MINGDA
- Printer model name: Raptor 450
- Made by a company from: China
- Launched: 2026
- Still made: Yes

[Read more by the manufacturer](https://www.3dmingda.com/raptor-450)

## What filament can the MINGDA Raptor 450 print?

Filament compatibility for the MINGDA Raptor 450: the materials MINGDA lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

### Best filament for the MINGDA Raptor 450

Filaments the MINGDA Raptor 450 prints well, MINGDA's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C
- [Bambu Lab ASA](https://simplyprint.io/filaments/bambu-lab/asa): ASA, 240-270 °C

## When to choose the MINGDA Raptor 450

Choose the Raptor 450 when you need the hottest chamber Mingda offers in a machine that runs from a 220 V supply: it lists PEEK, ABS, ASA, PC, nylon and filled grades, plus duplicate and mirror modes that double output for small parts (copy mode gives two 225 x 450 x 500 mm areas). For larger parts, the Raptor 800 and 1200 are bigger but have an 80 °C chamber. We found no independent review.

### Pros

- A 120 °C actively heated chamber, a 500 °C hotend and a 130 °C bed for high-temperature materials such as PEEK (Mingda).
- Independent dual extruders with duplicate and mirror modes (Mingda).
- A 450 x 450 x 500 mm build volume that runs from a 220 V supply at 3,200 W (Mingda).
- HEPA filtration, door-open detection, AI defect detection and power-loss recovery (Mingda).
- Runs Klipper, and is expected to work with SimplyPrint through Klipper (not yet confirmed).

### Cons

- Duplicate mode halves the build width to 225 mm per part, and mirror mode to 195 mm (Mingda).
- Spools are limited to 1 kg each in the filament holder (Mingda).
- We found no independent review and Mingda lists no price.
- SimplyPrint compatibility is expected rather than confirmed, and no camera is listed.

### Who it suits

- Schools: Not a good fit. A 120 °C chamber and a 500 °C hotend are not classroom territory.
- Hobbyists: Not a good fit. An industrial high-temperature machine that few hobbyists need.
- Businesses: Good fit. A rare heated-chamber machine for PEEK and engineering grades with IDEX duplicate output; untested by reviewers.
- Print farms: Can work. Duplicate mode multiplies output, but 1 kg spools, no camera listed and no plate-clearing kit in our sources weigh on a fleet.

## Compare the MINGDA Raptor 450 with similar printers

- [Sovol SV08 Max (Heat Chamber)](https://simplyprint.io/compatibility/sovol-sv08-max-heat-chamber): Compatible, 500 x 500 x 450 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [MINGDA MD-1000 Pro+](https://simplyprint.io/compatibility/mingda-md-1000-pro-plus): Expected to work, 1000 x 1000 x 1000 mm, Also by MINGDA · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA MD-600 Pro+](https://simplyprint.io/compatibility/mingda-md-600-pro-plus): Expected to work, 600 x 600 x 600 mm, Also by MINGDA · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Tronxy VEHO 500A](https://simplyprint.io/compatibility/tronxy-veho-500a): Compatible, 500 x 500 x 500 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Compare the MINGDA Raptor 450 with other printers](https://simplyprint.io/compatibility/compare?compare=mingda-raptor-450#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the MINGDA Raptor 450 compatible with SimplyPrint?

Most likely. We expect the MINGDA Raptor 450 to connect to SimplyPrint via Klipper (Moonraker), but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the MINGDA Raptor 450 to SimplyPrint?

Follow our step-by-step setup guide for the MINGDA Raptor 450. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the MINGDA Raptor 450?

Cura, PrusaSlicer and OrcaSlicer all work with the MINGDA Raptor 450, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the MINGDA Raptor 450?

Yes, but OrcaSlicer has no built-in profile for the MINGDA Raptor 450 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the MINGDA Raptor 450 print?

MINGDA lists PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the Raptor 450.

### Does the MINGDA Raptor 450 work with OctoPrint or Klipper?

The MINGDA Raptor 450 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the MINGDA Raptor 450's bed size and build volume?

The MINGDA Raptor 450 has a 450 x 450 mm print bed and prints up to 500 mm tall, a build volume of about 450 x 450 x 500 mm. See the full specifications table above for bed type, temperatures and more.

### When did the MINGDA Raptor 450 come out?

MINGDA launched the Raptor 450 in 2026.

### Can the MINGDA Raptor 450 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.