# MINGDA Raptor 1200: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the MINGDA MD-1000D.

- By MINGDA, China
- Launched 2026
- Canonical page: https://simplyprint.io/compatibility/mingda-raptor-1200

## MINGDA Raptor 1200 at a glance

The Raptor 1200 is Mingda's largest printer: a 1200 x 1200 x 1200 mm build volume, an 80 °C actively heated chamber, a 500 °C dual extruder and Klipper. It is for industrial users printing very large parts in ABS, ASA, PC, nylon and PPS.

- Build volume: 1200 x 1200 x 1200 mm
- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Prints well: PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the MINGDA Raptor 1200 to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through Klipper (Moonraker) |
| Klipper (Moonraker) | Expected to work | Nothing extra: the printer runs Klipper as it ships | Spec table says Klipper firmware with Wi-Fi/Ethernet remote printing, the same MINGDA Klipper platform as the mingda-md-1000d, which ships Moonraker. ([Source](https://www.3dmingda.com/raptor-1200)); Expected to work like the MINGDA MD-1000D |
| OctoPrint (Directly, over USB) | Not compatible |  | Ships Klipper; OctoPrint only runs on top of it. ([Source](https://www.3dmingda.com/raptor-1200)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [How to set up SimplyPrint on MINGDA Raptor 1200](https://simplyprint.io/setup-guide/mingda/raptor-1200.md)
- [How to set up Mainsail on MINGDA Raptor 1200](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on MINGDA Raptor 1200](https://docs.fluidd.xyz/installation)

- [Help us confirm](https://simplyprint.io/compatibility/mingda-raptor-1200/confirm)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint is expected to support most of what it offers on the MINGDA Raptor 1200: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

## What slicer to use for the MINGDA Raptor 1200

None of the slicers in SimplyPrint's cloud has a ready-made profile for the MINGDA Raptor 1200, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the MINGDA Raptor 1200 · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the MINGDA Raptor 1200 · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the MINGDA Raptor 1200 · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the MINGDA Raptor 1200 · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the MINGDA Raptor 1200 · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the MINGDA Raptor 1200 · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the MINGDA Raptor 1200 · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the MINGDA Raptor 1200.

## The app for the MINGDA Raptor 1200

SimplyPrint works as the MINGDA Raptor 1200's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the MINGDA Raptor 1200 to SimplyPrint, free](https://simplyprint.io/setup-guide/mingda/raptor-1200) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the MINGDA Raptor 1200

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## MINGDA Raptor 1200 specifications: bed size, print height and more

### Size

- Build volume: 1200 x 1200 x 1200 mm
- Bed type: Square
- Bed size: 1200 x 1200 mm
- Max print height: 1200 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Max extruder temperature: 500 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Heated chamber: Up to 80 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: MINGDA
- Printer model name: Raptor 1200
- Made by a company from: China
- Launched: 2026
- Still made: Yes

[Read more by the manufacturer](https://www.3dmingda.com/raptor-1200)

## What filament can the MINGDA Raptor 1200 print?

Filament compatibility for the MINGDA Raptor 1200: the materials MINGDA lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

### Best filament for the MINGDA Raptor 1200

Filaments the MINGDA Raptor 1200 prints well, MINGDA's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [ELEGOO PLA](https://simplyprint.io/filaments/elegoo/pla): PLA, 190-220 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C

## When to choose the MINGDA Raptor 1200

Choose the Raptor 1200 only when you need a 1.2 m cube of engineering-grade material in one piece and have the site for it: it needs three-phase 380 V power at up to 12,000 W and stands about 2 m tall and wide. For a smaller heated-chamber machine, the Raptor 800 or the 450 IDEX cost less and need less. We found no independent review and Mingda lists no price, so ask for references and sample prints.

### Pros

- A 1200 x 1200 x 1200 mm build volume with an 80 °C heated chamber and bellows cover for large ABS, ASA and PC parts (Mingda).
- A 500 °C dual extruder, a 110 °C bed and a wide material list including PA, PPS-CF, PC-CF and PET-GF (Mingda).
- HEPA filtration, door-open detection and AI defect detection (Mingda).
- Servo motors, power-loss recovery, remote monitoring and a 15.6-inch touchscreen (Mingda).
- Runs Klipper, and is expected to work with SimplyPrint through Klipper (not yet confirmed).

### Cons

- Needs three-phase 380 V power and up to 12,000 W (Mingda).
- A machine of 2006 x 1980 x 1975 mm, so it needs a dedicated space.
- We found no independent review and Mingda lists no price.
- SimplyPrint compatibility is expected rather than confirmed, and no camera is listed.

### Who it suits

- Schools: Not a good fit. An industrial three-phase machine, far beyond a classroom.
- Hobbyists: Not a good fit. The size, power and cost put it out of reach for hobby use.
- Businesses: Can work. Unusually large heated-chamber engineering parts, but untested by reviewers and a major site commitment.
- Print farms: Not a good fit. One enormous machine per site, not a fleet of identical printers.

## Compare the MINGDA Raptor 1200 with similar printers

- [MINGDA MD-1000 Pro+](https://simplyprint.io/compatibility/mingda-md-1000-pro-plus): Expected to work, 1000 x 1000 x 1000 mm, Also by MINGDA · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA MD-600 Pro+](https://simplyprint.io/compatibility/mingda-md-600-pro-plus): Expected to work, 600 x 600 x 600 mm, Also by MINGDA · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Modix Everest](https://simplyprint.io/compatibility/modix-everest): Compatible, 970 x 1030 x 2000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Tronxy VEHO 1000-16A](https://simplyprint.io/compatibility/tronxy-veho-1000-16a): Expected to work, 1000 x 1000 x 1600 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Compare the MINGDA Raptor 1200 with other printers](https://simplyprint.io/compatibility/compare?compare=mingda-raptor-1200#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the MINGDA Raptor 1200 compatible with SimplyPrint?

Most likely. We expect the MINGDA Raptor 1200 to connect to SimplyPrint via Klipper (Moonraker), but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the MINGDA Raptor 1200 to SimplyPrint?

Follow our step-by-step setup guide for the MINGDA Raptor 1200. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the MINGDA Raptor 1200?

Cura, PrusaSlicer and OrcaSlicer all work with the MINGDA Raptor 1200, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the MINGDA Raptor 1200?

Yes, but OrcaSlicer has no built-in profile for the MINGDA Raptor 1200 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the MINGDA Raptor 1200 print?

MINGDA lists ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the Raptor 1200.

### Does the MINGDA Raptor 1200 work with OctoPrint or Klipper?

The MINGDA Raptor 1200 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the MINGDA Raptor 1200's bed size and build volume?

The MINGDA Raptor 1200 has a 1200 x 1200 mm print bed and prints up to 1200 mm tall, a build volume of about 1200 x 1200 x 1200 mm. See the full specifications table above for bed type, temperatures and more.

### When did the MINGDA Raptor 1200 come out?

MINGDA launched the Raptor 1200 in 2026.

### Can the MINGDA Raptor 1200 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.