# MINGDA MD-600 Pro+: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the MINGDA MD-600D.

- By MINGDA, China
- Launched 2026
- Canonical page: https://simplyprint.io/compatibility/mingda-md-600-pro-plus

## MINGDA MD-600 Pro+ at a glance

The MD-600 Pro+ is a fully enclosed Klipper industrial printer from Mingda with a 600 x 600 x 600 mm build volume, a 350 °C hotend and a temperature-controlled filament chamber. It is for workshops that need large prototypes, jigs and moulds in PLA, PETG and filled nylons.

- Build volume: 600 x 600 x 600 mm
- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Prints well: PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the MINGDA MD-600 Pro+ to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through Klipper (Moonraker) |
| Klipper (Moonraker) | Expected to work | Nothing extra: the printer runs Klipper as it ships | Spec table says Klipper firmware with Wi-Fi/Ethernet remote printing, the same MINGDA Klipper platform as the mingda-md-600d, which ships Moonraker. ([Source](https://www.3dmingda.com/md-600pro-plus)); Expected to work like the MINGDA MD-600D |
| OctoPrint (Directly, over USB) | Not compatible |  | Ships Klipper; OctoPrint only runs on top of it. ([Source](https://www.3dmingda.com/md-600pro-plus)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [How to set up SimplyPrint on MINGDA MD-600 Pro+](https://simplyprint.io/setup-guide/mingda/md-600-pro-plus.md)
- [How to set up Mainsail on MINGDA MD-600 Pro+](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on MINGDA MD-600 Pro+](https://docs.fluidd.xyz/installation)

- [Help us confirm](https://simplyprint.io/compatibility/mingda-md-600-pro-plus/confirm)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint is expected to support most of what it offers on the MINGDA MD-600 Pro+: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

## What slicer to use for the MINGDA MD-600 Pro+

None of the slicers in SimplyPrint's cloud has a ready-made profile for the MINGDA MD-600 Pro+, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the MINGDA MD-600 Pro+ · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the MINGDA MD-600 Pro+ · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the MINGDA MD-600 Pro+ · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the MINGDA MD-600 Pro+ · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the MINGDA MD-600 Pro+ · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the MINGDA MD-600 Pro+ · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the MINGDA MD-600 Pro+ · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the MINGDA MD-600 Pro+.

## The app for the MINGDA MD-600 Pro+

SimplyPrint works as the MINGDA MD-600 Pro+'s app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the MINGDA MD-600 Pro+ to SimplyPrint, free](https://simplyprint.io/setup-guide/mingda/md-600-pro-plus) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the MINGDA MD-600 Pro+

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## MINGDA MD-600 Pro+ specifications: bed size, print height and more

### Size

- Build volume: 600 x 600 x 600 mm
- Bed type: Square
- Bed size: 600 x 600 mm
- Max print height: 600 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Max extruder temperature: 350 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: No
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: MINGDA
- Printer model name: MD-600 Pro+
- Made by a company from: China
- Launched: 2026
- Still made: Yes

[Read more by the manufacturer](https://www.3dmingda.com/md-600pro-plus)

## What filament can the MINGDA MD-600 Pro+ print?

Filament compatibility for the MINGDA MD-600 Pro+: the materials MINGDA lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | Enclosed, with a hot enough hotend and bed: ABS and ASA print well. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |

### Best filament for the MINGDA MD-600 Pro+

Filaments the MINGDA MD-600 Pro+ prints well, MINGDA's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [ELEGOO PLA](https://simplyprint.io/filaments/elegoo/pla): PLA, 190-220 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C

## When to choose the MINGDA MD-600 Pro+

Choose the MD-600 Pro+ for large parts in a fully enclosed machine without paying for a dual-extruder or heated-chamber model. Mingda lists PLA, PETG and carbon- and glass-filled PET and nylon, not ABS or ASA, and states no chamber heating. If you want two materials in one print and ABS-CF/GF, the MD-600D Ultra is the dual-extruder step up; for heated-chamber engineering prints, the Raptor line. We found no independent review.

### Pros

- A 600 x 600 x 600 mm build volume in a fully enclosed machine (Mingda).
- A 350 °C hotend, 110 °C bed and 300 mm/s top speed with input shaping and automatic levelling (Mingda).
- A temperature-controlled filament chamber and a built-in UPS for power-loss recovery (Mingda).
- A camera, Wi-Fi and Ethernet, and a 7-inch touchscreen (Mingda).
- Runs Klipper, and is expected to work with SimplyPrint through Klipper (not yet confirmed).

### Cons

- No chamber heating is listed, and ABS and ASA are not on Mingda's material list.
- A single extruder with one spool tray and a 0.6 mm nozzle by default, so no multi-colour (Mingda).
- A large, industrial machine that needs space and a 1,400 W supply (Mingda).
- We found no independent review, and SimplyPrint compatibility is expected rather than confirmed.

### Who it suits

- Schools: Not a good fit. Enclosed, but large, industrial and far beyond what a classroom needs.
- Hobbyists: Can work. Huge prints for a serious maker, but it is an industrial machine at an industrial price class.
- Businesses: Good fit. Large functional parts and prototypes in enclosed PLA, PETG and filled nylons, with camera and remote control; untested by reviewers.
- Print farms: Can work. Remote control and a UPS help, but each unit is big and no plate-clearing kit is in our sources.

## Compare the MINGDA MD-600 Pro+ with similar printers

- [MINGDA MD-600D Ultra](https://simplyprint.io/compatibility/mingda-md-600d-ultra): Expected to work, 600 x 600 x 600 mm, Also by MINGDA · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA MD-1000 Pro+](https://simplyprint.io/compatibility/mingda-md-1000-pro-plus): Expected to work, 1000 x 1000 x 1000 mm, Also by MINGDA · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Kentstrapper Bold 755](https://simplyprint.io/compatibility/kentstrapper-bold-755): Compatible, 700 x 500 x 500 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Bambu Lab P2S Combo](https://simplyprint.io/compatibility/bambu-lab-p2s-combo): Verified by SimplyPrint, 256 x 256 x 256 mm, Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [Compare the MINGDA MD-600 Pro+ with other printers](https://simplyprint.io/compatibility/compare?compare=mingda-md-600-pro-plus#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the MINGDA MD-600 Pro+ compatible with SimplyPrint?

Most likely. We expect the MINGDA MD-600 Pro+ to connect to SimplyPrint via Klipper (Moonraker), but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the MINGDA MD-600 Pro+ to SimplyPrint?

Follow our step-by-step setup guide for the MINGDA MD-600 Pro+. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the MINGDA MD-600 Pro+?

Cura, PrusaSlicer and OrcaSlicer all work with the MINGDA MD-600 Pro+, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the MINGDA MD-600 Pro+?

Yes, but OrcaSlicer has no built-in profile for the MINGDA MD-600 Pro+ that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the MINGDA MD-600 Pro+ print?

MINGDA lists PLA, PETG, Nylon (PA) and Carbon-fiber & glass-filled for the MD-600 Pro+.

### Does the MINGDA MD-600 Pro+ work with OctoPrint or Klipper?

The MINGDA MD-600 Pro+ works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the MINGDA MD-600 Pro+'s bed size and build volume?

The MINGDA MD-600 Pro+ has a 600 x 600 mm print bed and prints up to 600 mm tall, a build volume of about 600 x 600 x 600 mm. See the full specifications table above for bed type, temperatures and more.

### When did the MINGDA MD-600 Pro+ come out?

MINGDA launched the MD-600 Pro+ in 2026.

### Can the MINGDA MD-600 Pro+ eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.