# MINGDA MD-1000D Ultra: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the MINGDA MD-1000D.

- By MINGDA, China
- Canonical page: https://simplyprint.io/compatibility/mingda-md-1000d-ultra

## MINGDA MD-1000D Ultra at a glance

The MINGDA MD-1000D Ultra is a 3D printer by MINGDA with a 1000 x 1000 x 1000 mm build volume.

- Build volume: 1000 x 1000 x 1000 mm
- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Built-in camera: Yes
- Connectivity: Wi-Fi, Ethernet, USB

## Connect the MINGDA MD-1000D Ultra to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through Klipper (Moonraker) |
| Klipper (Moonraker) | Expected to work | Nothing extra: the printer runs Klipper as it ships | Spec table says Klipper firmware with Wi-Fi/Ethernet remote printing, the same MINGDA Klipper platform as the mingda-md-1000d, which ships Moonraker. The Ultra moves to MINGDA's own PI main control (MINGDA keeps an MD_PI_klipper fork). ([Source](https://www.3dmingda.com/md-1000d-ultra)); Expected to work like the MINGDA MD-1000D |
| OctoPrint (Directly, over USB) | Not compatible |  | Ships Klipper; OctoPrint only runs on top of it. ([Source](https://www.3dmingda.com/md-1000d-ultra)); Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin |

- [How to set up SimplyPrint on MINGDA MD-1000D Ultra](https://simplyprint.io/setup-guide/mingda/md-1000d-ultra.md)
- [How to set up Mainsail on MINGDA MD-1000D Ultra](https://docs.mainsail.xyz/setup)
- [How to set up Fluidd on MINGDA MD-1000D Ultra](https://docs.fluidd.xyz/installation)

- [Help us confirm](https://simplyprint.io/compatibility/mingda-md-1000d-ultra/confirm)

### What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint is expected to support most of what it offers on the MINGDA MD-1000D Ultra: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

## What slicer to use for the MINGDA MD-1000D Ultra

None of the slicers in SimplyPrint's cloud has a ready-made profile for the MINGDA MD-1000D Ultra, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the MINGDA MD-1000D Ultra · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the MINGDA MD-1000D Ultra · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the MINGDA MD-1000D Ultra · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the MINGDA MD-1000D Ultra · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the MINGDA MD-1000D Ultra · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the MINGDA MD-1000D Ultra · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the MINGDA MD-1000D Ultra · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the MINGDA MD-1000D Ultra.

## The app for the MINGDA MD-1000D Ultra

MINGDA doesn't make an app for the MINGDA MD-1000D Ultra. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the MINGDA MD-1000D Ultra to SimplyPrint, free](https://simplyprint.io/setup-guide/mingda/md-1000d-ultra) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the MINGDA MD-1000D Ultra

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## MINGDA MD-1000D Ultra specifications: bed size, print height and more

### Size

- Build volume: 1000 x 1000 x 1000 mm
- Bed type: Square
- Bed size: 1000 x 1000 mm
- Max print height: 1000 mm

### Printing

- Enclosure: Fully enclosed
- Max print speed: 300 mm/s
- Max extruder temperature: 350 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 2
- Toolheads: 2
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: Wi-Fi, Ethernet, USB
- Built-in camera: Yes
- Prints from: USB stick
- Supports serial printing: No
- Shipped firmware: Klipper

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: MINGDA
- Printer model name: MD-1000D Ultra
- Made by a company from: China
- Still made: Yes

[Read more by the manufacturer](https://www.3dmingda.com/md-1000d-ultra)

## What filament can the MINGDA MD-1000D Ultra print?

Filament compatibility for the MINGDA MD-1000D Ultra: the materials MINGDA lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |

### Best filament for the MINGDA MD-1000D Ultra

Filaments the MINGDA MD-1000D Ultra prints well, MINGDA's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [ELEGOO PLA](https://simplyprint.io/filaments/elegoo/pla): PLA, 190-220 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 190-230 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C

## Compare the MINGDA MD-1000D Ultra with similar printers

- [MINGDA MD-1000D](https://simplyprint.io/compatibility/mingda-md-1000d): Compatible, 1000 x 1000 x 1000 mm, Also by MINGDA · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [MINGDA MD-1000 Pro+](https://simplyprint.io/compatibility/mingda-md-1000-pro-plus): Expected to work, 1000 x 1000 x 1000 mm, Also by MINGDA · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- [WASP 3MT HDP](https://simplyprint.io/compatibility/wasp-3mt-hdp): Compatible, 1000 x 1000 x 1000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Tronxy VEHO 1000A](https://simplyprint.io/compatibility/tronxy-veho-1000a): Compatible, 1000 x 1000 x 1000 mm, Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
- [Compare the MINGDA MD-1000D Ultra with other printers](https://simplyprint.io/compatibility/compare?compare=mingda-md-1000d-ultra#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the MINGDA MD-1000D Ultra compatible with SimplyPrint?

Most likely. We expect the MINGDA MD-1000D Ultra to connect to SimplyPrint via Klipper (Moonraker), but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the MINGDA MD-1000D Ultra to SimplyPrint?

Follow our step-by-step setup guide for the MINGDA MD-1000D Ultra. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

### What slicer should I use for the MINGDA MD-1000D Ultra?

Cura, PrusaSlicer and OrcaSlicer all work with the MINGDA MD-1000D Ultra, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the MINGDA MD-1000D Ultra?

Yes, but OrcaSlicer has no built-in profile for the MINGDA MD-1000D Ultra that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the MINGDA MD-1000D Ultra print?

MINGDA lists PLA, PETG, ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the MD-1000D Ultra.

### Does the MINGDA MD-1000D Ultra work with OctoPrint or Klipper?

The MINGDA MD-1000D Ultra works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the MINGDA MD-1000D Ultra's bed size and build volume?

The MINGDA MD-1000D Ultra has a 1000 x 1000 mm print bed and prints up to 1000 mm tall, a build volume of about 1000 x 1000 x 1000 mm. See the full specifications table above for bed type, temperatures and more.

### Can the MINGDA MD-1000D Ultra eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.