# Kywoo3D Tycoon Slim: specs, SimplyPrint compatibility and setup

> **Expected to work** (Most likely). Not confirmed yet, but we expect it to work like the Kywoo3D Tycoon Max.

- By Kywoo3D, China
- Launched July 2021
- Canonical page: https://simplyprint.io/compatibility/kywoo3d-tycoon-slim

## Kywoo3D Tycoon Slim at a glance

The Kywoo3D Tycoon Slim is a 3D printer by Kywoo3D with a 240 x 240 x 300 mm build volume.

- Build volume: 240 x 240 x 300 mm
- Enclosure: Open frame
- Max print speed: 80 mm/s
- Prints well: PLA, PETG, TPU & flexibles, ABS & ASA
- Connectivity: USB, SD card

## Connect the Kywoo3D Tycoon Slim to SimplyPrint

| Way of connecting | Status | What you need | Notes |
| :--- | :--- | :--- | :--- |
| SimplyPrint | Expected to work |  | Through OctoPrint |
| OctoPrint (Directly, over USB) | Expected to work | A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable | Same Robin Nano firmware family as the Tycoon Max; a community repo keeps OctoPrint configs for the Slim. ([Source](https://github.com/kiss81/kywoo3dslim)); Expected to work like the Kywoo3D Tycoon Max |
| Klipper (Moonraker) | Not compatible |  | Ships Kywoo's firmware on an MKS Robin Nano 3.5 board; Klipper only after flashing it yourself. ([Source](https://github.com/Kywoo3D/Tycoon-Slim-V2.1.3-Multi-functional-Firmware)); Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification |

- [How to set up SimplyPrint on Kywoo3D Tycoon Slim](https://simplyprint.io/setup-guide/kywoo3d/tycoon-slim.md)
- [How to set up OctoPrint on Kywoo3D Tycoon Slim](https://simplyprint.io/compatibility/kywoo3d-tycoon-slim/octoprint-setup)

- [Help us confirm](https://simplyprint.io/compatibility/kywoo3d-tycoon-slim/confirm)

### What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Kywoo3D Tycoon Slim lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

## What slicer to use for the Kywoo3D Tycoon Slim

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Kywoo3D Tycoon Slim, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

- [PrusaSlicer](https://simplyprint.io/features/slicer/prusaslicer): No profile for the Kywoo3D Tycoon Slim · Runs in the SimplyPrint cloud
- [OrcaSlicer](https://simplyprint.io/features/slicer/orcaslicer): No profile for the Kywoo3D Tycoon Slim · Runs in the SimplyPrint cloud
- [BambuStudio](https://simplyprint.io/features/slicer/bambustudio): No profile for the Kywoo3D Tycoon Slim · Runs in the SimplyPrint cloud
- [ElegooSlicer](https://simplyprint.io/features/slicer/elegooslicer): No profile for the Kywoo3D Tycoon Slim · Runs in the SimplyPrint cloud
- [CrealityPrint](https://simplyprint.io/features/slicer/crealityprint): No profile for the Kywoo3D Tycoon Slim · Runs in the SimplyPrint cloud
- [Cura](https://simplyprint.io/features/slicer/cura): No profile for the Kywoo3D Tycoon Slim · Runs in the SimplyPrint cloud
- [Kiri:Moto](https://simplyprint.io/features/slicer/kirimoto): No profile for the Kywoo3D Tycoon Slim · Runs in the SimplyPrint cloud

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Kywoo3D Tycoon Slim.

## The app for the Kywoo3D Tycoon Slim

SimplyPrint works as the Kywoo3D Tycoon Slim's app: on your phone and in any browser, with a slicer in the cloud.

- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- Hosted in Frankfurt, Germany, under the GDPR.

[Connect the Kywoo3D Tycoon Slim to SimplyPrint, free](https://simplyprint.io/setup-guide/kywoo3d/tycoon-slim) · [App Store](https://apps.apple.com/app/simplyprint-3d/id1519749400) · [Google Play](https://play.google.com/store/apps/details?id=com.simplyprint.appdev)

## Automate the Kywoo3D Tycoon Slim

### Ways to automate it

- [Your own ejection G-code](https://simplyprint.io/features/autoprint/custom): Write the routine that clears your plate, and AutoPrint runs it after every print.
- [A robot arm, or anything with an API](https://simplyprint.io/features/autoprint/api): Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- [Clear it by hand, keep the queue](https://simplyprint.io/features/autoprint/manual-mode): AutoPrint waits for you to mark the plate clear, then starts the next job.

[How AutoPrint works](https://simplyprint.io/features/autoprint). AutoPrint comes with the Pro plan and up.

## Kywoo3D Tycoon Slim specifications: bed size, print height and more

### Size

- Build volume: 240 x 240 x 300 mm
- Bed type: Square
- Bed size: 240 x 240 mm
- Max print height: 300 mm

### Printing

- Enclosure: Open frame
- Max print speed: 80 mm/s
- Max extruder temperature: 260 °C
- Has heated bed: Yes
- Max bed temperature: 110 °C
- Number of nozzles: 1
- Toolheads: 1
- Direct drive: Yes
- Probing tool / Auto Bed Leveling: Yes
- Filament width: 1.75 mm

### Multi-material

- Toolchanger or hotend changer: No
- IDEX (independent dual extruders): No

### Connecting

- Connectivity: USB, SD card
- Prints from: microSD card
- Supports serial printing: Unknown
- Shipped firmware: Marlin

### Files and slicing

- Supported file formats: G-code (.gcode, .gco, .g)

### The printer

- Printer manufacturer / brand: Kywoo3D
- Printer model name: Tycoon Slim
- Made by a company from: China
- Launched: July 2021

[Read more by the manufacturer](https://web.archive.org/web/20250125051237/https://www.kywoo3d.com/products/tycoon-slim-direct-drive-3d-printer)

## What filament can the Kywoo3D Tycoon Slim print?

Filament compatibility for the Kywoo3D Tycoon Slim: the materials Kywoo3D lists for it.

| Filament | Suitability | Notes |
| :--- | :--- | :--- |
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |

### Best filament for the Kywoo3D Tycoon Slim

Filaments the Kywoo3D Tycoon Slim prints well, Kywoo3D's own first, then the best known.

- [Bambu Lab PLA Basic](https://simplyprint.io/filaments/bambu-lab/pla-basic): PLA, 190-230 °C
- [Bambu Lab PLA Matte](https://simplyprint.io/filaments/bambu-lab/pla-matte): PLA, 190-230 °C
- [SUNLU PLA](https://simplyprint.io/filaments/sunlu/pla): PLA, 200-240 °C
- [Anycubic PETG](https://simplyprint.io/filaments/anycubic/petg): PETG, 230-250 °C
- [Anycubic PLA Basic](https://simplyprint.io/filaments/anycubic/pla-basic): PLA, 190-230 °C
- [Anycubic PLA Plus](https://simplyprint.io/filaments/anycubic/pla-plus): PLA, 190-230 °C
- [Bambu Lab ABS](https://simplyprint.io/filaments/bambu-lab/abs): ABS, 240-270 °C
- [Bambu Lab ASA](https://simplyprint.io/filaments/bambu-lab/asa): ASA, 240-270 °C

## Compare the Kywoo3D Tycoon Slim with similar printers

- [Creality Ender-3 V3 KE](https://simplyprint.io/compatibility/creality-ender-3-v3-ke): Compatible, 220 x 220 x 240 mm, Similar build volume · Also prints ABS & ASA
- [Creality Ender-3 S1 Pro](https://simplyprint.io/compatibility/creality-ender-3-s1-pro): Compatible, 220 x 220 x 270 mm, Similar build volume · Also prints ABS & ASA
- [ELEGOO Neptune 4 Pro](https://simplyprint.io/compatibility/elegoo-neptune-4-pro): Compatible, 225 x 225 x 265 mm, Similar build volume · Also prints ABS & ASA
- [ELEGOO Neptune 4](https://simplyprint.io/compatibility/elegoo-neptune-4): Compatible, 225 x 225 x 265 mm, Similar build volume · Also prints ABS & ASA
- [Compare the Kywoo3D Tycoon Slim with other printers](https://simplyprint.io/compatibility/compare?compare=kywoo3d-tycoon-slim#choose)

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

## Frequently asked questions

### Is the Kywoo3D Tycoon Slim compatible with SimplyPrint?

Most likely. We expect the Kywoo3D Tycoon Slim to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

### How do I connect the Kywoo3D Tycoon Slim to SimplyPrint?

Follow our step-by-step setup guide for the Kywoo3D Tycoon Slim. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

### What slicer should I use for the Kywoo3D Tycoon Slim?

Cura, PrusaSlicer and OrcaSlicer all work with the Kywoo3D Tycoon Slim, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

### Can I use OrcaSlicer with the Kywoo3D Tycoon Slim?

Yes, but OrcaSlicer has no built-in profile for the Kywoo3D Tycoon Slim that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

### What filament can the Kywoo3D Tycoon Slim print?

Kywoo3D lists PLA, PETG, TPU & flexibles and ABS & ASA for the Tycoon Slim.

### Does the Kywoo3D Tycoon Slim work with OctoPrint or Klipper?

The Kywoo3D Tycoon Slim works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

### What is the Kywoo3D Tycoon Slim's bed size and build volume?

The Kywoo3D Tycoon Slim has a 240 x 240 mm print bed and prints up to 300 mm tall, a build volume of about 240 x 240 x 300 mm. See the full specifications table above for bed type, temperatures and more.

### When did the Kywoo3D Tycoon Slim come out?

Kywoo3D launched the Tycoon Slim in July 2021.

### Can the Kywoo3D Tycoon Slim eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

---

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.